Manuali utente per att cdls 7610

Sommario

• INSTALLATION

  2
  • 1. Insert the microcassette.

    2
  • 2. Choose a spot near an electrical outlet and a telephone jack.

    2
  • 3. Install the handset battery.

    2
  • 4. Set the Handset Ringer ON/OFF switch.

    2
  • 5. Connect the telephone line cord.

    2
  • 6. Mount the base on the wall (WALL MOUNTING ONLY)

    2
  • 7. Connect the power cord.

    2
  • 8. Charge the handset batteries before use.

    3
  • 9. Check for dial tone.

    3
  • 10. Set the dial mode.

    3
• BATTERIES

  4
  • Charging the Handset Battery Pack

    4
  • Replacing the Handset Battery Pack

    4
• IN CASE OF DIFFICULTY

  5
  • If the phone does not work at all, check these items first

    5
  • If you hear a two-beep signal when you try to use the handset

    5
  • If you have no dial tone,

    5
  • If you hear noise or interference when using the phone

    5
  • If the phone does not ring when you receive a call

    5
  • If your telephone misdials or you don’t hear the other person right away

    5
  • If the Message Light flashes rapidly

    5
  • If you have difficulty hearing messages

    6
  • If the recording tape sticks or malfunctions

    6
  • If the system does not answer after the correct number of rings

    6
  • If the system does not respond to remote

    6
• OPERATION

  7
  • Making A Call

    7
  • Answering a Call

    7
  • Ending a Call

    7
  • Redial

    7
  • Battery Saver Control Feature/Ringer ON-OFF

    7
  • Handset Volume

    7
  • Temporary Tone

    7
  • Mute

    7
  • Flash

    7
• MEMORY

  8
  • Storing Speed-Dial Numbers

    8
  • Storing a Number in M1

    8
  • Storing a Pause In a Memory Dial Number

    8
  • Dialing Speed-Dial Numbers

    8
  • Dialing M1

    8
  • Storing Numbers Just Dialed

    8
  • Replacing a Stored Number

    8
  • Memory Guard

    8
  • Directory Label

    8
• OPERATING RANGE

  9
• ANSWERING SYSTEM OPERATION

  10
  • Volume Control

    10
  • Recording Your Announcement

    10
  • Turning the System On and Off

    10
  • Setting the Clock

    10
  • Ring Select

    11
  • Answering Calls

    11
  • Bypassing the Announcement

    11
  • Message Light

    11
  • Listening to Your Messages

    11
    • Play messages

      11
    • Clear messages

      11
    • Save message

      11
    • Rewind

      11
    • Fast forward

      11
    • Interrupt message playback

      11
    • Replay messages

      11
  • Recording a Memo

    11
  • Call Screening/Intercept

    11
  • When the Tape is Full

    11
  • Changing the Microcassette

    11
  • FROM A REMOTE TOUCH TONE PHONE

    12
    • Remote Access Code

      12
    • Listening to Your Messages

      12
    • Recording a New Announcement

      12
    • Turning System On

      12
    • Turning System Off

      12
    • When the Tape is Full

      12
• IMAGES

  15
  • HANDSET AND BASE

    15
  • BASE - VIEW 1

    16
  • BASE - VIEW 2

    17
  • BACK OF BASE

    18
  • SIDE OF BASE

    19
  • TOP OF BASE

    20
  • HANDSET

    21
  • SIDE OF HANDSET

    22
  • BACK OF HANDSET

    23