Manuali utente per Brother LZ2-B851

Sommario

• cover

  1
• PL

  2
• contents

  6
• 1. NAME OF MAJOR PARTS

  8
• 2. SPECIFICATIONS

  9
• 3. INSTALLATION

  10
  • 3-1. Table processing diagram

    11
  • 3-2. Positioning

    11
  • 3-3. Installing the control box

    12
  • 3-4. Installing the rubber cushions

    13
  • 3-5. Installing the oil pan

    13
  • 3-6. Installing the cushions

    14
  • 3-7. Installing the switching plate

    14
  • 3-8. Installing the machine head

    15
  • 3-9. Tilting the sewing machine head

    16
  • 3-10. Connecting the ground wire

    18
  • 3-11. Connecting the cords (Installing the operation panel)

    18
  • 3-12. Installing the belt cover

    21
  • 3-13. Installing the foot switch

    21
  • 3-14. Installing the spool stand

    21
  • 3-15. Installing the eye guard

    22
  • 3-16. Installing the programmer (option)

    23
  • 3-17. Installing the work clamp lifter connecting rod

    23
  • 3-18. Installing the feed base cover supports

    24
  • 3-19. Installing the X feed base cover

    24
  • 3-20. Connecting the tubes (pneumatic type only)

    25
    • 3-20-1. Installing the air unit

      26
    • 3-20-2. Adjusting the speed controller

      26
• 4. LUBRICATION

  27
• 5. CORRECT OPERATION

  28
• 5-1. Selecting the needle and thread

  28
• 5-2. Installing the needle

  28
• 6. USING THE OPERATION PANEL

  33
  • 6-1. Explanation of panel

    33
  • 6-2. Using the floppy disk

    35
  • 6-3. Using the program R/W (Read/Write) switch

    37
  • 6-4. Using the TEST switch (Checking the sewing pattern)

    38
  • 6-5. Using the emergency stop switch

    39
  • 6-6. Adjusting the sewing SPEED control

    40
  • 6-7. Changing the X-SCALE and Y-SCALE settings

    40
  • 6-8. Using the bobbin thread counter

    41
  • 6-9. Using production counter

    42
  • 6-10. Using single split mode

    43
  • 6-11. Shifting a stitch pattern

    44
• 7. SEWING

  45
• 7-1. Before starting sewing....

  45
• 7-2. Sewing operation

  45
• 8. CLEANING AND INSPECTION

  47
  • 8-1. Cleaning the rotary hook

    47
  • 8-2. Lubrication

    47
  • 8-3. Draining the oil

    47
  • 8-4. Cleaning the control box air inlet port

    48
  • 8-5. Cleaning the air holes of belt cover and frame side cover

    48
  • 8-6. Cleaning the eye guard

    48
  • 8-7. Checking the needle

    48
• 9. STANDARD ADJUSTMENTS

  49
  • 9-1. Adjusting the needle bar height

    49
  • 9-2. Adjusting the needle bar lift amount

    49
  • 9-3. Adjusting the needle clearance

    50
  • 9-4. Adjusting the driver needle guard

    50
  • 9-5. Adjusting the shuttle race thread guide

    50
  • 9-6. Adjusting the movable knife

    51
  • 9-7. Adjusting the presser foot

    53
  • 9-8. Changing the presser foot lift

    54
  • 9-9. Adjusting the wiper

    55
  • 9-10. Adjusting the two-step work clamp lift amount

    56
    • 9-10-1. BAS-311F-0 Solenoid type

      56
    • 9-10-2. BAS-311F-0, 311F-L Pneumatic type

      56
    • 9-10-3. BAS-326F-0

      57
    • 9-10-4. Adjusting the air pressure

      57
  • 9-11. Adjusting the needle up stop position

    58
  • 9-12. Checking the input sensor and DIP switch input

    59
  • 9-13. Checking the input voltage

    60
  • 9-14. Clearing all memory settings

    60
• 10. DIP SWITCH

  61
  • 10-1. Panel DIP switch functions

    61
  • 10-2. DIP switches inside the control box

    63
• 11. CHANGING SPECIAL FUNCTIONS AND USING THE MEMORY SWITCHES

  65
• 12. ERROR CODES

  70
• 13. GAUGE PARTS LIST ACCORDING TO SUBCLASSES

  73
• 14. TROUBLESHOOTING

  75
• 15. OPTIONS

  79
• cover

  81