Manuali utente per First Virtual Communications 3000

Sommario

• Chapter One

  1
• Introduction

  1
• Voyager 3000 Family

  1
• VRA-3001T-XX-Y

  1
• VRA-3002T-XX-Y

  1
• VRA-3001R-XX-Y

  1
• VRA-3002R-XX-Y

  1
• Options

  1
• System Features

  1
• Device Carrier

  1
• Cooling

  1
• RAID Controller

  1
• Power Supplies

  1
• SCSI Connectors

  1
• RAID Basics

  1
• RAID 0

  1
• RAID 1 / 0+1

  1
• RAID 3

  1
• RAID 5

  1
• Required Number of Drives and Net Capacity

  1
• Chapter Two

  2
• Installation and Setup

  2
• Unpacking and Initial Setup

  2
• Recommendations for installation of rackmount systems in 19” racks

  2
• Ambient Temperature

  2
• Air Flow

  2
• Mechanical Loading

  2
• Electrical Considerations

  2
• Grounding

  2
• Setting the host SCSI Ids

  2
• Setting the target SCSI Ids

  2
• Setting the target SCSI Ids on a VRA-3001 system

  2
• Setting the target SCSI Ids on a VRA-3002 system

  2
• Cabling and Termination Issues

  2
• Components

  2
• Power Supplies

  2
• Devices

  2
• Power Option Board

  2
• Controller

  2
• Advanced Cooling Modules

  2
• Component Insertion and removal

  2
• Drive Insertion

  2
• Drive Removal

  2
• PSU Insertion and Removal

  2
• Controller Insertion and Removal

  2
• Chapter Three

  3
• EMU

  3
• Environmental Monitoring Unit Configurations

  3
• Introduction

  3
• EMU Features

  3
• System Configurations

  3
• Setting up the EMU

  3
• Available EMU information

  3
• Interpreting the EMU LED Feedback

  3
• Connecting the EMU

  3
• Chapter Four

  4
• RAID controller configuration

  4
• Controller Description

  4
• Controller Configuration

  4
• Accessing the VOYAGER 3000 Menus

  4
• Connecting a Monitor

  4
• Creating a logical volume

  4
• Creating a Second Logical Volume

  4
• Adding a Global Spare

  4
• Partitioning a Logical Volume

  4
• Mapping Host LUNs

  4
• De-assigning LUN Mapping

  4
• Scan New SCSI Drives

  4
• View and Edit logical drives

  4
• View and Edit SCSI Drives

  4
• View and Edit SCSI Channels

  4
• View and Edit Configuration Parameters

  4
• View and Edit Peripheral Devices

  4
• System Functions

  4
• Down Loading New Firmware

  4
• View System Information

  4
• Quick Installation

  4
• Chapter Five

  5
• Front Panel Operation

  5
• Creating a New Logical Drive

  5
• Viewing Disks Assigned to a Logical Drive

  5
• Assigning a Spare Drive

  5
• Mapping a Logical Drive to a Host Channel and LUN

  5
• Deleting a Logical Drive

  5
• Setting the SCSI Channels

  5
• Channel Terminator Setting

  5
• SCSI Reset at Power-Up Setting

  5
• Sequential Drive Spin-Up Setting

  5
• Data Cache Setting

  5
• Viewing Connected Drives

  5
• Adding New Drives into Current List

  5
• Issuing a Reset

  5
• Serial Number

  5
• Download Firmware

  5
• Figure 1-1 VRA-3001T-XX-Y Single Tower

  1
• Figure 1-2 Internal bus configuration of VRA-3001T-XX-Y

  1
• Figure 1-3 VRA-3002T-XX-Y Twin Tower

  1
• Figure 1-4 VRA-3002T-XX-Y SCSI target interconnects

  1
• Figure 1-5 VRA-3001R-FW-Y example configuration

  1
• Figure 1-6 VRA-3002R-FW-Y example configuration

  1
• Figure 1-7 Device Carrier

  1
• Figure 1-8 PSU mounted in removable canister

  1
• Figure 2-1 Grounding shelves within a 19" cabinet

  2
• Figure 2-2 Rear view of rack showing ground point

  2
• Figure 2-3 Rear view of single tower showing host connections

  2
• Figure 2-4 Rear view showing ACMs, cowl and shield

  2
• Figure 2-5 Setting the Target Bus SCSI IDs

  2
• Figure 2-6 Setting the RAID Target Bus SCSI IDs

  2
• Figure 2-7 Location of DPS1 on VRA-3002 second backplane

  2
• Figure 2-8 SCSI ID Switch (DPS1)

  2
• Figure 2-9 Removal and insertion of a Power Supply Unit

  2
• Figure 2-10 Device carrier

  2
• Figure 2-11 RAID Controller

  2
• Figure 2-12 Main board access

  2
• Figure 2-13 Installing SIMMs

  2
• Figure 2-14 Removing the back face plate

  2
• Figure 2-15 Rear view of ACM assembly

  2
• Figure 3-1 Single shelf EMU configuration

  3
• Figure 3-2 Dual shelf EMU configuration

  3
• Figure 3-3 Location of EMU within the shelf

  3
• Figure 3-4 EMU PCB layout

  3
• Figure 3-5 Connecting the EMUs together

  3
• Figure 4-1 Front view of controller (within a canister)

  4
• Figure 4-2 Logical View of VOYAGER 3001

  4
• Figure 4-3 Windows Program Manager

  4
• Figure 4-4 Windows Terminal Program (Main Menu)

  4
• Figure 4-5 Setting Windows Terminal Emulation

  4
• Figure 4-6 Setting Windows Terminal Preferences

  4
• Figure 4-7 Windows Terminal Preferences Screen

  4
• Figure 4-8 Windows Terminal Communications Settings

  4
• Figure 4-9 Windows Terminal Communication Settings

  4
• Figure 4-10 Initial Screen

  4
• Figure 4-11 Main Menu Screen

  4
• Figure 4-12 Verifying Drive Configuration

  4
• Figure 4-13 View and edit Logical Drives Screen

  4
• Figure 4-14 Creating a logical drive

  4
• Figure 4-15 Selecting the logical drive's RAID level

  4
• Figure 4-16 Selecting drives for inclusion in a RAID set

  4
• Figure 4-17 Setting the maximum drive capacity.

  4
• Figure 4-18 Logical drive creation confirmation screen

  4
• Figure 4-19 Progress of RAID set creation

  4
• Figure 4-20 Creating a RAID 1 volume

  4
• Figure 4-21 Selecting two drives to form a RAID 1 set

  4
• Figure 4-22 Viewing all Logical Drives

  4
• Figure 4-23 Adding Global Spare drive

  4
• Figure 4-24 Allocating Capacities to partitions

  4
• Figure 4-25 Logical Drive Partition Table

  4
• Figure 4-26 Allocating capacities to partitions

  4
• Figure 4-27 Mapping Host LUNs

  4
• Figure 4-28 LUN Partition table

  4
• Figure 4-29 Selecting a Volume for LUN mapping

  4
• Figure 4-30 Selecting a partition for LUN mapping

  4
• Figure 4-31 Mapping Logical Volume 0 Partition 1 to Channel 2 LUN 1

  4
• Figure 4-32 Logical mapping of all partitions

  4
• Figure 4-33 List and status of drives on system

  4
• Figure 4-34 Scanning SCSI drives

  4
• Figure 4-35 View and edit scsi drives

  4
• Figure 4-36 View and edit SCSI channels

  4
• Figure 4-37 View and edit SCSI target

  4
• Figure 4-38 View and edit configuration parameters

  4
• Figure 4-39 Uploading the code using ZMODEM protocol

  4
• Figure 4-40 View system information

  4
• Figure 4-41 Quick Installation

  4
• Table 1-1 Voyager 3000 Tower configurations

  1
• Table 1-2 Voyager 3000 Rackmountable configurations

  1
• Table 1-3 Voyager 3000 Fault Tolerant configurations

  1
• Table 1-4 Host Connection Codes

  1
• Table 1-5 RAID 0 layout

  1
• Table 1-6 RAID 0+1 layout

  1
• Table 1-7 RAID 3 layout

  1
• Table 1-8 RAID 5 layout

  1
• Table 1-9 Minimum drives necessary for a RAID set

  1
• Table 2-2 Cable Lengths Vs Transfer Rates

  2
• Table 2-3 Device carrier Device Part Numbers

  2
• Table 2-4 Power Option Board Switch Definitions

  2
• Table 3-1 EMU Switch Settings

  3
• Table 3-2 ID settings for the EMU

  3
• Table 3-3 Power Sequencing Signals

  3
• Table 3-4 Read Only Memory locations within the EMU

  3
• Table 3-5 Read/Write locations within the EMU

  3
• Table 3-6 Devices/events monitored by the EMU

  3
• Table 3-7 Interpreting the EMU LED feedback

  3
• Table 4-1 RS232 Terminal Settings

  4