Manuali utente per Fujitsu 600C

Sommario

• 1. GENERAL

  1
• 1.1 GENERAL

  1
• 1.2 DEVICE CONFIGURATION

  1
• 1.2.1 Outer View

  1
• 1.2.2 Components

  1
• 2. SPECIFICATIONS

  2
• 2.1 FUNCTIONAL SPECIFICATIONS

  2
• 2.2 ENVIRONMENTAL SPECIFICATIONS

  2
• 3. OPERATION

  3
• 3.1 REMOVING THE SHIPPING BRACKET

  3
• 3.2 POWER ON/OFF

  3
• 3.3 INDICATION PANEL

  3
• 3.4 SETTING THE SCSI ID AND CONNECTING THE INTERFACE CABLE

  3
• 3.4.1 SCSI Cable Connection

  3
• 3.5 PAPER SPECIFICATIONS

  3
• 3.5.1 Paper Size

  3
• 3.5.2 Paper conditions

  3
• 3.5.2.1 ADF

  3
• 3.5.2.2 FIatbed

  3
• 3.5.2.3 Items to avoid

  3
• 3.5.3 Readable area

  3
• 3.6 DOCUMENT SETTING METHOD

  3
• 3.6.1 Flatbed

  3
• 3.6.1.1 When the document size is of letter/A4 size or smaller

  3
• 3.6.1.2 When the document is a thick book

  3
• 3.6.2 ADF

  3
• 3.6.2.1 Setting the ADF paper chute

  3
• 3.6.2.2 Placing the documents on the ADF paper chute

  3
• 3.7 CLEANING

  3
• 3.7.1 Cleaning the document cover and the document glass

  3
• 3.7.2 Cleaning inside the ADF

  3
• 4. INTERFACE

  4
• 4.1 PHYSICAL SPECIFICATIONS

  4
• 4.1.1 Connection

  4
• 4.1.2 Physical Specification

  4
• 4.1.3 Termination

  4
• 4.1.4 Pin assignments

  4
• 4.2 SCSI BUS

  4
• 4.2.1 System configuration

  4
• 4.2.1.1 System configuration

  4
• 4.2.1.2 Addresses of SCSI devices

  4
• 4.2.1.3 Peripheral equipment

  4
• 4.2.2 Bus signals

  4
• 4.2.3 Bus signal drive conditions

  4
• 4.3 BUS PHASES

  4
• 4.3.1 BUS FREE phase

  4
• 4.3.2 ARBITRATION phase

  4
• 4.3.3 SELECTION phase

  4
• 4.3.4 INFORMATION TRANSFER phases

  4
• 4.3.4.1 Asynchronous information transfer

  4
• 4.4 COMMANDS

  4
• 4.4.1 RESERVE UNIT command

  4
• 4.4.1.1 RESERVE UNIT command: COMMAND phase (initiator Õ target)

  4
• 4.4.2 RELEASE UNIT command

  4
• 4.4.2.1 RELEASE UNIT command: COMMAND phase (initiator → target)

  4
• 4.4.3 INQUIRY command

  4
• 4.4.3.1 INQUIRY command: COMMAND phase (initiator → target)

  4
• 4.4.3.2 Inquiry data: DATA IN phase (target → initiator)

  4
• 4.4.4 REQUEST SENSE command

  4
• 4.4.4.1 REQUEST SENSE command: COMMAND phase (initiator → target)

  4
• 4.4.4.2 Sense data: DATA EN phase (target → initiator)

  4
• 4.4.5 SEND DIAGNOSTIC command

  4
• 4.4.5.1 SEND DIAGNOSTIC command: COMMAND phase (initiator → target)

  4
• 4.4.5.2 Contents of self-test

  4
• 4.4.5.3 Results of self-test

  4
• 4.4.6 TEST UNIT READY command

  4
• 4.4.6.1 TEST UNIT READY command: COMMAND phase (initiator → target)

  4
• 4.4.6.2 Acknowledgment

  4
• 4.4.7 SET WINDOW command

  4
• 4.4.7.1 SET WINDOW command: COMMAND phase (initiator → target)

  4
• 4.4.7.2 Window date: DATA OUT phase (initiator → target)

  4
• 4.4.7.3 Update of ScanPartner 600C OEM manual

  4
• 4.4.7.4 B&W Scanning Vender unique parameters

  4
• 4.4.7.4.1 Vendor unique identification code: Byte 28

  4
• 4.4.7.4.2 Paper size: byte 35

  4
• 4.4.7.5 Color Scanning Vender unique parameters

  4
• 4.4.7.5.1 Vendor unique identification code: Byte 28

  4
• 4.4.7.5.2 Parameter length: Byte 29

  4
• 4.4.7.5.3 Color scanning parameters

  4
• 4.4.8 OBJECT POSITION command

  4
• 4.4.8.1 OBJECT POSITION command: COMMAND phase (initator → target)

  4
• 4.4.8.2 Acknowledgment

  4
• 4.4.8.3 ADF sequence

  4
• 4.4.9 READ command

  4
• 4.4.9.1 READ command: COMMAND phase (initiator → target)

  4
• 4.4.9.2 DATA IN phase (target → initiator)

  4
• 4.4.10 Scan command

  4
• 4.4.10.1 SCAN Command phase (initiator → target)

  4
• 4.5 STATUS: STATUS PHASE (TARGET → INITIATOR)

  4
• 4.6 MESSAGES

  4
• 4.6.1 ATN detection

  4
• 4.6.2 Message types

  4
• 4.6.2.1 COMMAND COMPLETE (X'00'): MESSAGE IN phase (target → initiator)

  4
• 4.6.2.2 INITIATOR DETECTED ERROR (X'05'): MESSAGE OUT phase (initiator → target)

  4
• 4.6.2.3 ABORT (X'06'): MESSAGE OUT phase (initiator → target)

  4
• 4.6.2.4 MESSAGE REJECT (X'07'): MESSAGE IN/OUT phase (initiator → target)

  4
• 4.6.2.5 NO OPERATION (X'08'): MESSAGE OUT phase (initiator → target)

  4
• 4.6.2.6 MESSAGE PARITY ERROR (X'09'): MESSAGE OUT phase (initiator → target)

  4
• 4.6.2.7 BUS DEVICE RESET (X'0C'): MESSAGE OUT phase (initiator → target)

  4
• 4.6.2.8 IDENDIFY (X'80' TO X'FF'): MESSAGE OUT phase (initiator → target)

  4
• 4.7 COMMAND SEQUENCE

  4
• 4.7.1 Initial sequence

  4
• 4.7.2 Read sequence

  4
• 4.7.2.1 Read sequence for B&W mode

  4
• 4.7.3 READ command sequence

  4
• 4.7.3.1 Single READ

  4
• 4.7.3.2 Multiple READ

  4
• 4.8 STATUS TRANSITION OF LOGICAL UNIT

  4
• 4.9 ERROR TABLE

  4
• 4.10 ITEMS FOR SPECIFYING WINDOW

  4
• 5. DIAGNOSTICS

  5
• 5.1 ONLINE DIAGNOSTICS

  5
• 5.2 OFFLINE DIAGNOSTICS

  5
• 5.3 DIAGNOSTIC FLOWCHARTS

  5
• 5.3.1 Group 1 error flowchart (Lamp assembly)

  5
• 5.3.2 Group 2 error flowchart (Flatbed/ADF motor)

  5
• 5.3.3 Group 3 error flowchart (paper in ADF paper tray)

  5
• 5.3.4 Group 3 error flowchart (no paper in ADF paper tray)

  5