Manuali utente per Hangzhou H3C Technologies Co. Ltd H3CEWT0235A29G

Sommario

• Chapter 1 Product Overview

  1
• 1.1 Introduction

  1
• 1.2 Hardware Configuration

  1
• 1.2.1 LEDs

  1
• 1.2.2 Interfaces

  1
• Chapter 2 Installation Preparations

  2
• 2.1 Unpacking and Inspection

  2
• 2.2 Preparing Installation Tools

  2
• 2.3 Examining the Installation Site

  2
• 2.3.1 Installation Site Selection

  2
• 2.3.2 Temperature and Humidity Requirements

  2
• 2.3.3 Power Supply

  2
• 2.3.4 Grounding and Lightning Protection

  2
• Chapter 3 Installation of Indoor APs

  3
• 3.1 Installation Flowchart

  3
• 3.2 Determining the Installation Position

  3
• 3.3 Installing the AP

  3
• 3.3.1 Installing the Wall-Mounting Bracket on a Wall

  3
• 3.3.2 Installing the AP on the Wall-Mounting Bracket

  3
• 3.3.3 Locking the AP onto the Wall-Mounting Bracket (Optional)

  3
• 3.4 Connecting the Power Supply

  3
• 3.4.1 Local Power Supply

  3
• 3.4.2 Power over Ethernet

  3
• 3.5 Connecting the Network

  3
• Chapter 4 Installation of Outdoor APs

  4
• 4.1 Installation Flowchart

  4
• 4.1.1 Installing the AP

  4
• 4.1.2 Installing an Outdoor Antenna

  4
• 4.1.3 Connecting External Cables

  4
• 4.1.4 Powering On the AP

  4
• 4.2 Connecting the Network

  4
• Chapter 5 Software Setting

  5
• 5.1 Working Mode Switching

  5
• 5.1.1 Identifying the Current Working Mode

  5
• 5.1.2 Switching from the FAT Mode to the FIT Mode

  5
• 5.1.3 Switching from the FIT Mode to the FAT Mode

  5
• 5.2 Setting Up a Software Debugging Environment

  5
• 5.2.1 Setting Up a Connection with the AP Through the Console Interface

  5
• 5.2.2 Telneting to the AP

  5
• 5.2.3 Configuring Telnet

  5
• 5.3 Configuring a FIT AP

  5
• 5.3.1 Associating a FIT AP with the AC

  5
• 5.3.2 Configuring a FIT AP on the AC

  5
• 5.3.3 Security Setting

  5
• 5.4 Configuring a FAT AP

  5
• 5.4.1 System Setting

  5
• 5.4.2 Setting a System Name and the System Clock

  5
• 5.4.3 Security Setting

  5
• Figure 1-1 Positions of the WA2200 series on the network

  1
• Figure 1-2 Appearance of the WA2200 series

  1
• Figure 1-3 LEDs on the H3C WA2210-AG/WA2220-AG

  1
• Figure 1-4 LEDs on the H3C WA2220E-AG

  1
• Figure 1-5 LEDs on the H3C WA2210X-G

  1
• Figure 1-6 LEDs on the WA2220X-AG and WA2220X-AGP

  1
• Figure 1-7 Interfaces on H3C WA2210-AG/WA2220-AG(indoor)

  1
• Figure 1-8 Interfaces on H3C WA2220E-AG(enhanced)

  1
• Figure 1-9 Interfaces on H3C WA2210X-G/WA2220X-AG/WA2220X-AGP(outdoor)

  1
• Figure 3-1 Installation flowchart of an indoor (enhanced) AP

  3
• Figure 3-2 Screw hole locations and screw hole size

  3
• Figure 3-3 Install the wall-mounting bracket

  3
• Figure 3-4 Fix the indoor AP onto the wall-mounting bracket

  3
• Figure 3-5 Fix the enhanced AP onto the wall-mounting bracket

  3
• Figure 3-6 Lock the indoor AP onto the wall-mounting bracket

  3
• Figure 3-7 Lock the enhanced AP onto the wall-mounting bracket

  3
• Figure 3-8 Local power supply connection

  3
• Figure 3-9 PoE connection

  3
• Figure 3-10 Connect the AP to the network

  3
• Figure 4-1 Installation flowchart of the outdoor models

  4
• Figure 4-2 Installation flowchart of the AP on a wall

  4
• Figure 4-3 Wall-mounting bracket structure and positions of screw holes

  4
• Figure 4-4 Install the outdoor AP on a wall

  4
• Figure 4-5 Pole and pole base

  4
• Figure 4-6 Install the outdoor AP on a vertical pole

  4
• Figure 4-7 Install the outdoor AP on a horizontal pole

  4
• Figure 4-8 Install a directional outdoor antenna on a parapet

  4
• Figure 4-9 Install a directional outdoor antenna on a building top surface or cement pier

  4
• Figure 4-10 Install omni antennas

  4
• Figure 4-11 Install an omni antenna under a special environment

  4
• Figure 4-12 Install an omni antenna on the AP directly

  4
• Figure 4-13 Connect the Ethernet electrical interface to the uplink device

  4
• Figure 4-14 Connect the Ethernet optical interface to the uplink device

  4
• Figure 4-15 Exploded view of the port lightning protector (PoE)

  4
• Figure 4-16 Ethernet cable connector

  4
• Figure 4-17 Insert the Ethernet cable connector into the Ethernet interface

  4
• Figure 4-18 Connect a fiber cable

  4
• Figure 4-19 Connection of external cables of the AP

  4
• Figure 4-20 Connection between the AP and Internet

  4
• Figure 5-1 Connection between a FIT AP and the AC

  5
• Table 1-1 Physical dimensions of the WA2200 series

  1
• Table 1-2 Protocols that each model supports and the chassis material

  1
• Table 1-3 Description of LEDs on the H3C WA2210-AG/WA2220-AG

  1
• Table 1-4 Description of LEDs on the H3C WA2220E-AG

  1
• Table 1-6 Descriptions of interfaces on WA2200 series WLAN access points

  1
• Table 2-1 List of articles in the package

  2
• Table 2-2 List of installation tools

  2
• Table 2-3 Environment specifications

  2
• Table 2-4 Nominal voltage and frequency of the low-voltage AC power supply

  2
• Table 2-5 Grounding and lightning protection requirements

  2
• Table 4-1 RJ-45 straight-through Ethernet cable pinouts

  4
• Table 4-2 RJ-45 crossover Ethernet cable pinouts

  4
• Chapter 1 Regulatory Compliance Information

  1
• 1.1 Regulatory compliance standards

  1
• 1.2 European Regulatory compliance

  1
• 1.2.1 EU Compliance information

  1
• 1.2.2 EU Country Restriction in 2.4GHz band

  1
• 1.2.3 EU Country Restriction in 5GHz band

  1
• 1.3 USA regulatory compliance

  1
• 1.3.1 FCC Part 15

  1
• 1.3.2 RF Requirements

  1
• 2.2 Electricity Safety Elektrische Sicherheit 用电安全

  2
• Table 2-1 Regulatory compliance standards

  1