Manuale UtenteSommarioBEFORE YOU BEGIN...................................................................................... 12IMPORTANT SAFETY NOTICES..................................................................... 22HARDWARE PACK……….....…....................................................................... 42ASSEMBLY INSTRUCTIONS........................................................................... 62EXPLODED DIAGRAM.........................................................................………. 162PARTS LIST………………………………………………………………………….. 172WARRANTY.................................................................................................… 182ORDERING PARTS......................................................................................... 182HARDWARE PACK6ASSEMBLY INSTRUCTION7Note: Do not tighten the Nuts and Bolts until instructed to do so.7Attach an Upright Beam (#3) onto a Floor Stabilizer (#1). Secure it with two M10 x 2 ¾” Carriage Bolts (#70), two Ø ¾” Washers (#84), and two M10 Aircraft Nuts (#86).7Attach the top of Left Support (#4) to the Upright Beam (#3). Secure it with two M10 x 5/8” Allen Bolts (#80) and two Ø ¾” Washers (#84). Attach the Left Support onto the Floor Stabilizer.7Repeat Procedure B & C to install the other side.7Attach each end of the Rear Stabilizer (#7) to the bottom of Left & Right Support. Align the holes. Secure each end of Rear Stabilizer, Support, and Floor Stabilizer together with two M10 x 3 ¾” Carriage Bolts (#68), two Ø ¾” Washers (#84), and two M10 A7Attach the Left & Right Safety Catch (#11 & #12), Left & Right Bar Catch (#13 & #14) onto the two Upright Beams.7PARTS LIST18KEY NO. DESCRIPTION Q’ty18Dimensioni: 2,22 MBPagine: 19Language: EnglishApri il manuale
