Manuale Utente
Sommario
- This equipment has been tested and found to comply with the limits for a Class A digital device, ...4
- These graphics are used throughout this manual to draw your attention to important information ab...6
- 10
- 10
- 10
- 10
- 10
- 10
- 10
- 10
- 10
- Refer to the Appendix for a complete list of the systems that have been tested with the LitePro 760.11
- • Transport the LitePro in the original shipping carton or approved hard case (see your In Focus ...12
- This chapter describes how to position the LitePro for optimum viewing and how to connect it to y...14
- • For information about projector placement and image size, see the “LitePro Tips” box on the nex...14
- • If you want to use the LitePro’s Rear Project feature, set it up behind your translucent screen...14
- The distance from the LitePro’s lens to the screen determines the size of the projected image as ...15
- 16
- 16
- 16
- 16
- 16
- 16
- 16
- 16
- 16
- 16
- 16
- 16
- 16
- 16
- 16
- 16
- Follow this procedure if your computer is a Sun SPARCstation, SGI Indigo or Indy, Intergraph 2400...17
- • If your computer is an SGI, plug the “SGI” end of the adapter into the “Computer” end of the Li...17
- • If your computer is an SGI, plug the “SGI” end of the adapter into the “Monitor” end of the Lit...17
- Follow this procedure if your computer is an HP workstation or X terminal, an IBM RS6000/220, a D...19
- Follow this procedure if your computer is an IBM-compatible desktop computer, IBM PS/2, IBM 90/XG...20
- • If your monitor is 13 inches or smaller, set the switch on the adapter to “LoRes”. If the monit...21
- It is very important to allow the projector to cool down before turning it completely off. Turnin...24
- To use the remote control, point it at the projection screen or at the front of the LitePro. The ...26
- To focus the image, rotate the projection lens until the image is clear. Rotate the lens clockwis...26
- • Holding the LitePro handle, press the elevator’s quick release button. Push the elevator back u...27
- 29
- 33
- 33
- 33
- Your LitePro is equipped with a bulb life detection system called Bulb Guard. When the operating ...39
- A power line surge or spike can blow the power supply fuse and cause the LitePro to stop working....40
- Before calling your dealer for assistance, follow these steps in this order to make sure everythi...44
- • Find out what kind of graphics controller card is installed in your computer. (This is the circ...45
- • Does the cable have bent pins in any of the connectors? Check the pins on all three ends of the...45
- • The brightness control may need to be adjusted. Adjust the brightness up or down until the text...45
- • Use the arrow buttons on the remote to center the image. (The menu must be off when you re-posi...46
- - Does your computer have a compatible graphics board? The LitePro 760 is not compatible with CGA...46
- • You may need to adjust the tracking to reduce or enlarge the projected image. Refer to “Track” ...46
- • Adjust the brightness and/or contrast. Remember that, just as there are differences in the disp...47
- • One of the integrated circuits inside the LitePro has failed. The only functionality that is lo...47
- • You may need to replace the batteries in the remote. Refer to “Replacing Batteries in the Remot...47
- 48
- 48
- 48
- 48
- 48
- 48
- 48
- 48
- 48
- 48
- 48
- 48
- 48
- 48
- 48
- 48
- 48
- 48
- 48
- 48
- 48
- 48
- 48
- 48
- 48
- 48
- 48
- 48
- 48
- 48
- 48
- 48
- 48
- 48
- 48
- 48
- 48
- 48
- 48
- 48
- 48
- 48
- 48
- 48
- 48
- 49
- 49
- 49
- 49
- 49
- 49
- 49
- 49
- 49
- 49
- 49
- 49
- 49
- 49
- 49
- 49
- 49
- 49
- 49
- 49
- 49
- 49
- 49
- 50
- 50
- 50
- 50
- 50
- 50
- 51
- 51
- 51
- 51
- 52
- 53
- 53
- 53
- 53
- 53
- 53
- 53
- 53
- 54
- 54
- 54
- 54
- 54
- 54
- 54
- 54
- 54
- 54
- 55
- 55
- 55
- 55
- 55
- 55
- 55
- 55
- 55
- 55
- 55
- 55
- 55
- 55
- 55
- 55
- 55
- 55
- 55
- 55
- 55
- 55
- 55
- 55
- 55
- 56
- 56
- 56
- 56
- 56
- 56
- 56
- 56
- 56
- 56
- 56
- 56
- 56
- 56
- 56
- 56
- 56
- 56
- 56
- 56
- 56
- 56
- 56
- 56
- 56
- 57
- 57
- 57
- 57
- 58
- 58
- 58
- 58
- 58
- 58
- 58
- 58
- 58
- 58
- 58
- 58
- 59
- 59
- 59
- 59
- 59
- 59
- 60
- 60
- 60
- 60
- 60
- 60
- 60
- 60
- 60
- 60
- 60
- 61
- 61
- 61
- 61
- 61
- 61
- In Focus Systems Inc. (“In Focus”) warrants that each LitePro 760 (“the Product”) sold hereunder ...62
- In Focus shall have no further obligation under the foregoing limited warranty if the Product has...62
- THE WARRANTY PRINTED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PURCHASE. ALL OTHER WARRANTIES...62
