Manuali utente per Jackson dishmachines

Sommario

• TECHNICAL MANUAL

  1
• REVISION PAGE

  3
• NOMENCLATURE FOR THE MODELS COVERED IN THIS MANUAL:

  4
• TABLE OF CONTENTS

  5
  • TABLE OF CONTENTS

    6
• SECTION 1: SPECIFICATION INFORMATION

  7
  • 10 SERIES SPECIFICATIONS

    8
  • 10A DIMENSIONS

    9
  • 10AB/10APRB/10U DIMENSIONS

    10
  • 10 SERIES TABLE DIMENSIONS

    11
• SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS

  12
  • INSTALLATION INSTRUCTIONS: VISUAL INSPECTION/UNPACKING

    13
    • INSTALLATION INSTRUCTIONS: LEVELING/INSTALLING DISHMACHINE & VACUUM BREAKER PLUMBING

      14
    • INSTALLATION INSTRUCTIONS: INSTALLIGN INTERNAL VACUUM BREAKER & HOOD ASSEMBLY

      15
    • INSTALLATION INSTRUCTIONS: GENERAL WATER & ELECTRICAL CONNECTIONS

      16
    • INSTALLATION INSTRUCTIONS: FINAL CHECK

      17
  • OPERATION INSTRUCTIONS

    18
  • DETERGENT CONTROL

    19
• SECTION 3: PREVENTATIVE MAINTENANCE

  20
  • PREVENTATIVE MAINTENANCE

    21
• SECTION 4: SERVICE PROCEDURES

  22
  • RINSE HEAD / WASH HEAD ASSEMBLIES

    23
  • TIMER FOR 10 DISHMACHINES

    24
  • FUNCTION OF SWITCHES, CIRCUIT BREAKER & INDICATING LIGHTS\REPLACEMENT OF SWITCHES

    25
  • REPLACEMENT OF SWITCHES IN CONTROL PANEL:

    25
  • THERMOSTAT ADJUSTMENT

    26
  • RINSE TANK HEATER SYSTEM

    27
  • WASH TANK HEATER SYSTEM

    28
  • WATER LEVEL CONTROL

    29
  • WATER LEVEL CONTROL (AS USED ON AN APRB)

    30
  • REPLACING SEAL AND CERAMIC ON WASH AND RINSE PUMPS

    31
• SECTION 5: TROUBLESHOOTING SECTION

  32
  • COMMON PROBLEMS

    33
  • COMMON PROBLEMS

    34
  • COMMON PROBLEMS

    35
• SECTION 6: ASSEMBLY PARTS

  36
  • 10A ASSEMBLY

    37
    • VACUUM BREAKER/CONNECTOR ASSEMBLIES 10A

      55
  • 10AB/10APRB/10U ASSEMBLY

    38
    • 10AB/10APRB/10U RINSE BOOSTER & ASSOCIATED PARTS

      48
    • VACUUM BREAKER/CONNECTOR ASSEMBLIES 10AB/10APRB/10U ALL UNITS

      56
    • WASH TANK CROSS VIEW / TUB TO BOOSTER CONNECTION

      47
  • CONTROL BOX ASSEMBY

    39
    • CONTROL BOX ASSEMBLY (CONTINUED)

      40
    • ORDERING REPLACEMENT WIRE

      41
    • ORDERING REPLACEMENT CONDUIT & FITTINGS/HOSE & TUBING

      42
  • TUB ASSEMBLY

    43
    • TUB ASSEMBLY (CONTINUED)

      44
  • BOTTOM VIEW ASSEMBLY

    45
    • BOTTOM VIEW ASSEMBLY (CONTINUED)

      46
    • PUMP AND MOTOR ASSEMBLY

      49
    • THERMOSTAT HOUSING ASSEMBLY

      50
  • INCOMING PLUMBING ASSEMBLIES

    51
    • 1/2” SOLENOID VALVE & 1/2” NPT VACUUM BREAKER REPAIR PARTS KITS

      52
  • HOOD AND ASSOCIATED ASSEMBLIES

    53
    • HOOD AND ASSOCIATED ASSEMBLIES (CONTINUED)

      54
  • PARTS LIST FOR MODEL 10 DISHWASHERS

    57
    • PARTS LIST FOR MODEL 10 DISHWASHERS

      58
    • PARTS LIST FOR MODEL 10 DISHWASHERS

      59
• SECTION 7: ELECTRICAL SCHEMATICS

  60
  • 10A, 10AB/10U, 10APRB

    61
  • 10A WIRING DIAGRAM (208-230 VOLT, 60HZ, SINGLE PHASE)

    62
  • 10AB/10U WIRING DIAGRAM (208-230 VOLT, 60HZ, SINGLE PHASE)

    63
  • 10AB/10U WIRING DIAGRAM (208-230 VOLT, 60HZ, THREE PHASE)

    64
  • 10APRB WIRING DIAGRAM (208-230 VOLT, 60HZ, SINGLE PHASE)

    65
  • 10APRB WIRING DIAGRAM (208-230 VOLT, 60HZ, THREE PHASE)

    66