Manuali utente per NorthStar Navigation 8000I

Manuale Utente (English)Manuale Utente (English)

Manuale Utente

Sommario

Dimensioni:

593 KB
Pagine:

45
Language:

English

Apri il manuale

Manuale Utente

Sommario

Important Safety and Warning Information
2
Disclaimer
5
Warranty
5
Contents
6
1 Welcome to the Northstar 8000i
16
- 1.1 Networking the 8000i
  16
- 1.2 How to use this manual
  17
- 1.3 Conventions
  17
2 Introduction to the Northstar 8000i
18
- 2.1 Turn on the 8000i
  18
- 2.2 Turn off the 8000i
  19
- 2.3 The keys on the 15 inch Monitor
  19
- 2.4 The keys on the remote keypad
  21
- 2.5 The keys on the 12 inch Display Processor
  22
- 2.6 The buttons
  23
- 2.7 How to select an item
  23
- 2.8 Single pane options
  23
- 2.9 What is the active pane?
  24
- 2.10 What are pages?
  24
- 2.11 Expand a small pane
  25
- 2.12 Cycle through the panes on a page
  25
- 2.13 Select a page
  26
- 2.14 Edit a page
  26
3 Set up the Northstar 8000i basics
27
- 3.1 Adjust the brightness on the 15 inch Monitor
  27
- 3.2 Adjust the brightness on a 12 inch Display Processor
  27
- 3.3 Turn the keypad beeps on or off
  28
- 3.4 Turn the keypad backlight on or off
  28
- 3.5 Adjust the volume
  28
- 3.6 Select a palette
  29
- 3.7 Show/hide the control panel
  29
- 3.8 Show/hide the instruments bar
  29
- 3.9 Show/hide the top control bar
  29
- 3.10 Select the time format
  30
- 3.11 Select your time zone
  30
- 3.12 Select the large scale distance units
  31
- 3.13 Select the small scale distance units
  31
- 3.14 Select the temperature units
  31
- 3.15 Select the depth units
  32
- 3.16 Select the speed units
  32
- 3.17 Select the volume units for liquids
  32
- 3.18 Select the pressure units
  33
- 3.19 Specify your vessel statistics
  33
4 Chart
34
5 Set up the chart library
35
- 5.1 Display the C-MAP MAX Pro Chart Manager screen
  35
- 5.2 What does the C-MAP PRO Chart Manager screen show?
  35
- 5.3 The Chart Manager control panel
  36
- 5.4 The Chart Manager icons
  36
- 5.5 Information on C-Map chart licenses and subscriptions
  38
- 5.6 Purchase or rent?
  38
- 5.7 Different ways to choose a chart collection
  38
- 5.8 Purchase a chart license over the internet
  40
- 5.9 Purchase a chart license over the phone
  40
- 5.10 Purchase a chart license through a dealer
  41
- 5.11 Load the chart licenses
  42
- 5.12 Install the chart data
  42
- 5.13 Update charts over the internet
  42
- 5.14 Update the database by DVD
  45
- 5.15 Uninstall chart collections
  45
6 Chart screen basics
47
- 6.1 Display the chart screen
  47
- 6.2 What does the chart screen show?
  48
- 6.3 Display your current position in real time
  49
- 6.4 Display your current position data
  49
- 6.5 Instant GoTo
  49
- 6.6 GoTo or show a Lat/Long coordinate
  49
- 6.7 Zoom in or out on a chart screen
  50
- 6.8 Pan the chart
  50
- 6.9 Zoom in or out on part of a chart screen
  50
- 6.10 Change the chart view
  51
- 6.11 What is the chart orientation?
  51
- 6.12 Change the chart orientation
  52
- 6.13 What is the vessel offset mode?
  52
- 6.14 Select the vessel offset mode
  53
- 6.15 Select the level of chart detail
  53
- 6.16 Show details about an object on the chart
  53
- 6.17 Show range and bearing from your vessel
  54
- 6.18 Show range and bearing between two points
  54
7 Customize the chart screen
56
- 7.1 What is the course predictor line?
  56
- 7.2 Show/hide the course predictor line
  56
- 7.3 Keep your vessel in view on the chart screen
  57
- 7.4 Select the vessel symbol
  57
- 7.5 What is the chart guard zone?
  57
- 7.6 Set up the chart guard zone
  58
- 7.7 Turn the chart guard zone on or off
  58
- 7.8 Select the default icon for a waypoint
  59
- 7.9 Select the default icon for an event mark
  59
- 7.10 Set the deep water contour
  59
- 7.11 Show/hide your current track
  60
- 7.12 Show/hide the chart boundaries
  60
- 7.13 Show/hide shade safe depths
  61
- 7.14 Show/hide the Lat/Long grid overlay
  61
- 7.15 What are light sectors?
  62
- 7.16 Show/hide the light sectors
  62
- 7.17 Show/hide tidal flow and currents
  62
8 Use the chart views
63
- 8.1 Default settings for the chart views
  63
9 Use the chart overlays
65
- 9.1 Overlay the radar
  65
- 9.2 Adjust the settings for the radar
  66
- 9.3 Change the radar mode
  66
- 9.4 Adjust the radar opacity
  66
- 9.5 Overlay satellite or aerial photos
  67
- 9.6 Overlay the ports and marinas
  67
- 9.7 Overlay roads, terrain, SAR and/or GMDSS areas
  67
10 Use waypoints
69
- 10.1 Create a waypoint
  69
- 10.2 Create an event mark
  69
- 10.3 Select and show a waypoint on the chart
  70
- 10.4 Hide a waypoint
  70
- 10.5 Delete a waypoint
  70
- 10.6 Navigate to a waypoint
  71
- 10.7 Stop navigating to a waypoint
  71
- 10.8 Set/remove the warning zone for a waypoint
  71
- 10.9 Find a waypoint
  72
- 10.10 Display the waypoint details
  72
- 10.11 Change the waypoint details
  73
- 10.12 Display the waypoints library
  73
- 10.13 Delete a waypoint from the Waypoints Library
  74
11 Use routes and waypoints
75
- 11.1 Copy an existing route
  75
- 11.2 Create a new route
  76
- 11.3 Move a waypoint in a route
  77
- 11.4 Add a new waypoint into a route
  77
- 11.5 Add a waypoint to the start or end of the route
  78
- 11.6 Remove a waypoint from a route using the Routes Library
  79
- 11.7 Remove a waypoint from a route using the Chart screen
  79
- 11.8 Change the order of the waypoints in a route
  80
- 11.9 Add an existing waypoint to a route
  80
- 11.10 Display the Routes Library
  81
- 11.11 Select and follow a route from the Routes Library
  81
- 11.12 Select and follow a route with GoTo
  81
- 11.13 Follow a route
  82
- 11.14 Navigate to the previous or next waypoint
  82
- 11.15 Stop following a route
  82
- 11.16 Hide an inactive route
  83
- 11.17 Delete a route
  83
- 11.18 Reverse your route
  83
- 11.19 Display and/or change the route details
  84
- 11.20 Reset the XTE on an active route or waypoint
  84
- 11.21 Set up routes to be shown or hidden
  85
- 11.22 Show the route length and estimated travel time
  85
12 Set up navigation
87
- 12.1 Select the bearing mode
  87
- 12.2 Select the variation source
  88
- 12.3 Set the manual variation
  88
- 12.4 Select the position data format
  89
- 12.5 Set the look ahead distance to update chart
  89
- 12.6 Set the center circle to update chart
  90
- 12.7 Set the amount of time represented by the course predictor line
  90
- 12.8 Set the angle delay to update the chart
  91
- 12.9 Set the waypoint arrival distance
  91
- 12.10 Select whether to continue navigating at the route end
  92
13 Introduction to 3D Chart
93
- 13.1 Display the 3D Chart screen
  93
- 13.2 Reposition the 3D Chart screen to show your vessel
  93
- 13.3 Pan the 3D Chart to show new areas
  94
- 13.4 Rotate the view of the 3D Chart manually
  94
- 13.5 Change the azimuth setting on 3D Chart
  94
- 13.6 Change the camera angle for 3D Chart
  95
- 13.7 Change the elevation manually
  95
- 13.8 Enhance the vertical scale
  96
- 13.9 Change the vessel mode
  96
- 13.10 Show/hide the bathymetric data
  96
- 13.11 Overlay satellite or aerial photos on 3D Chart
  97
- 13.12 Synchronize 3D Chart and the chart screen
  97
14 3D Steer
99
- 14.1 Display the 3D Steer screen
  99
- 14.2 What does 3D Steer show?
  99
- 14.3 When to reset the XTE
  99
15 The sounder
101
- 15.1 How the sounder works
  101
16 Use the sounder
101
- 16.1 Display the sounder screen
  102
- 16.2 What does the sounder screen show?
  102
- 16.3 What does the sounder status bar show?
  103
- 16.4 Change the scroll speed
  103
- 16.5 Change the palette
  104
- 16.6 Show/hide the depth value
  104
- 16.7 Show/hide the depth line
  105
- 16.8 Move the depth line
  105
- 16.9 Change the sounder operating mode
  105
- 16.10 When to use 50 kHz, 200 kHz, or mixed frequency
  106
- 16.11 Select 50 kHz, 200 kHz or mixed frequency screen
  107
- 16.12 Select a split 50/200 kHz screen
  107
- 16.13 Select a split zoom screen
  108
- 16.14 What is zoom range and zoom range shift?
  108
- 16.15 Change the zoom range shift
  108
- 16.16 Select a split bottom lock screen
  109
- 16.17 Change the ratio of a split screen
  109
- 16.18 What is the A-Scope?
  110
- 16.19 Show/hide the A-Scope
  111
- 16.20 Change the ratio of the A-Scope
  111
17 How to interpret the sounder screens
112
- 17.1 What are fish arches?
  112
- 17.2 Problems with fish arches?
  112
- 17.3 How to recognize different types of fish
  113
- 17.4 How to recognize and avoid shadows
  113
- 17.5 How to recognize the type of bottom
  113
- 17.6 How the water depth and scroll speed affect the history
  113
- 17.7 Factors that affect the echo strength
  114
18 Change the sounder range and gain
115
- 18.1 What is gain?
  115
- 18.2 Change the gain setting
  115
- 18.3 What is the gain threshold?
  116
- 18.4 Change the gain threshold
  116
- 18.5 What is auto range and range shift?
  117
- 18.6 Turn the auto range on or off
  117
- 18.7 Change the range shift
  118
- 18.8 Change the range
  118
19 Set up the sounder
119
- 19.1 Change the transducer depth
  119
- 19.2 Change the water temperature offset
  120
- 19.3 Change the water temperature averaging time
  120
- 19.4 Change the sounder's speed offset
  120
- 19.5 Change the sounder's speed filter
  121
- 19.6 Change the zoom range
  121
20 Radar
123
- 20.1 How the radar works
  123
- 20.2 What are the radar modes?
  123
21 Use the radar
125
- 21.1 Display the radar screen
  125
- 21.2 Start the radar transmitting
  125
- 21.3 Stop the radar transmitting
  126
- 21.4 What does the radar screen show?
  126
- 21.5 What does the radar status bar show?
  127
- 21.6 What is the radar orientation?
  127
- 21.7 Change the radar orientation
  128
- 21.8 Change the radar range offset
  128
- 21.9 Customize the position of the PPI center
  128
- 21.10 Set the PPI position to Look Ahead or Center
  129
- 21.11 Select True or Relative Motion mode
  129
- 21.12 Reset the TM position
  130
22 Optimize the quality of the radar display
131
- 22.1 Change the radar gain mode
  131
- 22.2 Change the radar gain setting
  132
- 22.3 What is sea clutter?
  132
- 22.4 Change the sea clutter mode
  132
- 22.5 Change the sea clutter setting
  133
- 22.6 What is rain clutter?
  133
- 22.7 Change the rain setting
  134
- 22.8 Reduce interference from other radars
  134
23 Customize the radar screen
136
- 23.1 Change the radar palette
  136
- 23.2 Show/hide the North indicator
  136
- 23.3 Show/hide the heading marker
  137
- 23.4 Show/hide the range rings
  137
- 23.5 Show/hide the active waypoint on radar
  137
- 23.6 Show/hide the active route on radar
  138
- 23.7 Show/hide waypoint or route details on radar
  138
24 Measure range and bearing
139
- 24.1 Find range and bearing with the cursor
  139
- 24.2 Show/hide a VRM/EBL
  139
- 24.3 Find range and bearing with fixed VRM/EBL
  140
- 24.4 Find range and bearing with floating VRM/EBL
  141
- 24.5 Set the EBL reference bearing
  142
25 Target presentation
143
- 25.1 Make small targets more easy to see
  143
- 25.2 Turn off or customize target trails
  143
- 25.3 Remove target trails from the radar
  144
26 Use the radar guard zones
145
- 26.1 What is a radar guard zone?
  145
- 26.2 Turn a radar guard zone on or off
  145
- 26.3 Set the sensitivity of the radar guard zone alarm
  146
- 26.4 Customize a radar guard zone
  146
27 Set up the radar
148
- 27.1 Change the radar startup mode
  148
- 27.2 Change the radar antenna height
  148
- 27.3 Change the parking angle
  148
- 27.4 Change the range of the radar
  149
- 27.5 Change the radar bearing alignment
  149
28 Instruments
151
- 28.1 Choose how to view the instruments
  151
- 28.2 Select an instrument panel
  151
- 28.3 Rename an instrument panel
  151
- 28.4 Select the color scheme for an instrument panel
  152
- 28.5 Change the layout of the instrument panel
  152
- 28.6 Resize an instrument
  152
- 28.7 Add an instrument
  153
- 28.8 Create an instrument panel
  154
- 28.9 Delete an instrument
  154
- 28.10 Delete an instrument panel
  154
29 Alarms
156
- 29.1 Which alarms can be changed?
  156
- 29.2 View the current settings for an alarm
  156
- 29.3 Turn an alarm On/Off
  157
- 29.4 Change the upper or lower trigger settings for an alarm
  157
- 29.5 Set the alarm audio
  157
- 29.6 Set the delay for an alarm
  158
- 29.7 Trigger an alarm in case of a loss of input data
  159
- 29.8 View the alarm log
  159
- 29.9 Acknowledge one or more alarms
  160
- 29.10 Reset an alarm
  161
- 29.11 Set an anchor alarm
  161
30 Entertainment
162
- 30.1 Show multiple entertainment panes
  163
- 30.2 What file formats are supported?
  163
- 30.3 Turn the volume up or down
  163
31 Manage your media files with a portable drive
164
- 31.1 Copy media files to a portable drive
  164
- 31.2 Copy media files from a portable drive
  165
- 31.3 Play media files from a portable drive
  166
- 31.4 Delete media files from a portable drive
  166
32 Delete an item from the music library
168
33 Delete a video from the video library
169
34 Use the music jukebox
170
- 34.1 Select and play music from the jukebox
  170
- 34.2 Pause playing music from the jukebox
  171
- 34.3 Repeat the whole album or playlist in the jukebox
  171
- 34.4 Play the previous or next track in the music jukebox
  171
- 34.5 Change an album's cover art
  172
- 34.6 Create and name a new playlist
  172
- 34.7 Change a playlist
  173
- 34.8 Play tracks randomly in the album or playlist
  173
- 34.9 Delete a playlist
  173
- 34.10 Edit an item in the music library
  174
- 34.11 View the music details
  174
- 34.12 Select and play a playlist
  175
- 34.13 Queue more music
  175
35 CD/DVD options
176
- 35.1 Play a music CD
  176
- 35.2 Set random play On/Off on a music CD
  176
- 35.3 Select a particular track on a music CD
  176
- 35.4 Set repeat play On/Off on a music CD
  177
- 35.5 Play the previous or next track on a music CD
  177
- 35.6 Pause playing a music CD
  177
- 35.7 Resume playing a music CD
  177
- 35.8 Stop and eject a music CD
  178
36 Video jukebox options
179
- 36.1 Select and play a video
  179
- 36.2 Play a video in full screen mode
  180
- 36.3 Pause or resume playing a video
  180
- 36.4 Stop or restart a video
  180
- 36.5 Fast forward a video
  180
- 36.6 Rewind a video
  181
- 36.7 Set repeat play On/Off for a video
  181
- 36.8 Play a different video
  181
37 DVD options
182
- 37.1 Play a DVD
  182
- 37.2 Show the DVD menu
  182
- 37.3 Play a DVD in full screen mode
  182
- 37.4 Play or resume playing a DVD
  183
- 37.5 Stop or restart a DVD
  183
- 37.6 Play the previous or next scene on a DVD
  183
- 37.7 Fast forward a DVD
  183
- 37.8 Rewind a DVD
  184
- 37.9 Stop and eject a DVD
  184
38 Manage your Media Libraries
185
- 38.1 Change the automatic ejection setting for music CDs
  185
- 38.2 Set the volume levels for the entertainment applications
  185
- 38.3 Set the location of the media library
  186
39 Video Aux In
187
- 39.1 What video formats are supported?
  187
- 39.2 Select and play the Video Aux In source
  187
- 39.3 Select the audio source for Video Aux In
  187
- 39.4 Play Video Aux In in full screen mode
  188
40 Camera
189
- 40.1 What types of camera are supported?
  189
- 40.2 Add the camera to the network
  189
- 40.3 View the camera in full screen mode
  189
41 Maintain the Northstar 8000i
190
- 41.1 How to clean the touch screen
  190
- 41.2 How to clean a display unit
  190
- 41.3 Restore settings and information
  190
- 41.4 Calibrate the touch screen
  190
- 41.5 Find the software version number
  191
- 41.6 Technical support, service and repairs
  191
- 41.7 Upgrading the 8000i system
  191
- 42 Troubleshooting
  193
- 42.1 Touch screen is inaccurate
  193
- 42.2 Camera screen goes blank or camera isn't available
  193
- 42.3 Sounder - Bottom is not displayed
  193
- 42.4 Sounder shows a double bottom trace
  193
- 42.5 Radar overlay doesn't appear on the chart screen
  194
- 42.6 Radar shows random or grouped dots
  194
- 42.7 Radar shows random signals in center
  194
- 42.8 Radar shows different patterns on each sweep
  194
- 42.9 Radar shows multiple echoes off the same object
  194
- 42.10 Radar shows arcs and/or shadows
  194
- 42.11 Radar shows false echoes and/or background noise
  195
- 42.12 Charts won't display
  195
- 42.13 Waypoints and/or Routes aren’t shown on all the display units.
  195
- 42.14 3D Chart won't display photo overlays
  195
- 42.15 3D Chart photo overlays switch off
  195
- 42.16 Restore routes, tracks, and waypoints
  196
- 42.17 Restore global settings
  196
- 42.18 Restore local settings
  197
- 42.19 Gray screen with message: "Master" name unavailable
  197
Glossary
198
- A
  198
- B
  198
- C
  199
- D
  199
- F
  199
- G
  200
- H
  200
- I
  200
- K
  201
- L
  201
- M
  201
- N
  202
- O
  202
- P
  202
- R
  203
- S
  204
- T
  205
- U
  205
- W
  205
- Z
  206
Index
207
- 3
  207
- A
  207
- B
  207
- C
  207
- D
  209
- E
  209
- F
  209
- G
  210
- H
  210
- I
  210
- K
  210
- L
  210
- M
  210
- N
  211
- O
  211
- P
  211
- Q
  212
- R
  212
- S
  213
- T
  215
- U
  215
- V
  215
- W
  216
- Z
  216
Man Overboard
217
Addendum.
218

Dimensioni:

1,07 MB
Pagine:

220
Language:

English

Apri il manuale