Manuali utente per Omega Engineering DP3300 Series

Sommario

• SPECIFICATIONS:

  3
• DESCRIPTION:

  4
• SAVING PROGRAMMED PARAMETER:

  4
• PEAKS:

  5
• RESETTING PEAKS

  6
• RATE:

  6
• MODES OF OPERATION FOR PULSE CHANNEL:

  6
• RPM MONITOR

  6
• COUNTER

  7
• MODES OF OPERATION FOR COUNTER:

  8
• MODE 0: (Count up with manual reset to zero)

  8
• MODE 1: (Count up to Preset with auto reset to zero)

  8
• MODE 2: (Count up to Preset with auto Zero after delay)

  8
• MODE 3: (Count down to zero with manual preset)

  8
• MODE 4: (Count down to zero with auto preset)

  8
• MODE 5: (Count down to zero with auto preset after delay)

  8
• RESETTING COUNT:

  9
• RELAY DELAY PERIOD:

  9
• TOTALIZER:

  9
• BATCH COUNT:

  9
• SCALING:

  9
• TIME:

  9
• SETUP:

  10
• EXITING SETUP:

  10
• CHANNEL CONFIGURATION

  10
• ‘Input Type’ Setup

  10
• ‘Channel ON/OFF’ Setup

  11
• ‘Decimal Point Position’ Setup

  11
• ‘High Scale’ Setup

  11
• ‘Low Scale’ Setup

  11
• ‘Offset’ Setup

  11
• ‘Tare’ Setup

  12
• ‘Limits’ Setup

  12
• ‘Deadband’ Setup

  12
• ‘Relay Latched/Non-Latched Mode’ Setup

  12
• ‘Relay Normally Open/Closed’ Setup

  12
• ‘Engineering Units’ Setup

  13
• ‘Rate Time Base’ Setup

  13
• SYSTEM CONFIGURATION:

  13
• ‘Display Time’ Setup

  14
• Cold Junction Setting

  14
• Thermocouple Calibration Procedure

  14
• Voltage Range Setup (0-5vdc, 0-10vdc)

  15
• Voltage Range Setup (for millivolt inputs)

  15
• Current Range Setup

  15
• Correct Range Settings

  15
• Example #1: Use of the OFFSET Parameter

  15
• Example #2: Use of the LOW SCALE Parameter

  15
• SETUP FOR A PULSE CHANNEL:

  18
• Turning a Channel ON or OFF

  18
• SETUP FOR COUNTER:

  18
• SETUP FOR RATE MONITOR:

  20
• ALARM OUTPUTS:

  21
• Resetting:

  21
• Figure 1. Open Collector Hookup Example

  22
• Figure 2. Electro-mechanical Relays Hookup Example

  22
• POWER

  22
• INPUT/OUTPUT CONNECTOR PIN ASSIGNMENTS

  23
• MOUNTING

  24
• WARRANTY/DISCLAIMER

  25