Manuali utente per Pioneer VSX-919AH-K

Sommario

• Contents

  4
  • Flow of settings on the receiver

    6
    • 1 Before you start

      6
  • j

    6
    • 2 Determining the speakers’ application (page 15)

      6
  • j

    6
    • 3 Connecting the speakers

      6
  • j

    6
    • 4 Connecting the components

      6
  • j

    6
    • 5 Switching the speaker impedance (page 36)

      6
  • j

    6
    • 6 Power On

      6
  • j

    6
    • 7 Changing the OSD display language (OSD Language) (page 36)

      6
  • j

    6
    • 8 Surround back speaker setting (page 94)

      6
  • j

    6
    • 9 MCACC speaker settings

      6
  • j

    6
    • 10 The Input Setup menu (page 39)

      6
  • j

    6
    • 11 Basic playback (page 41)

      6
  • j

    6
    • 12 Adjusting the sound and picture quality as desired

      6
  • j

    6
    • 13 Other optional adjustments and settings

      6
  • j

    6
    • 14 Making maximum use of the remote control

      6
• Before you start

  7
  • Checking what’s in the box

    7
  • Installing the receiver

    7
  • Loading the batteries

    7
    • CAUTION

      7
• Controls and displays

  8
  • Front panel

    8
    • 1 INPUT SELECTOR dial

      8
    • 2 u STANDBY/ON

      8
    • 3 Tuner controls

      8
    • 4 PHASE CONTROL indicator - Lights to indicate Phase Control is selected (page 59).

      8
    • 5 Character display

      8
    • 6 ENTER

      8
    • 7 Remote sensor

      8
    • 8 MASTER VOLUME dial

      8
    • 9 PHONES jack

      9
    • 10 Listening mode buttons

      9
    • 11 SPEAKERS

      9
    • 12 MULTI-ZONE controls

      9
    • 13 iPod/iPhone/USB, VIDEO INPUT terminals

      9
    • 14 MCACC SETUP MIC jack

      9
  • Display

    9
    • 1 SIGNAL indicators

      9
    • 2 Program format indicators

      9
    • 3 Digital format indicators

      9
    • 4 S.RTRV

      10
    • 5 MULTI-ZONE

      10
    • 6 DSD PCM - Light during DSD (Direct Stream Digital) to PCM conversion with SACDs.

      10
    • 7 SOUND

      10
    • 8 PQLS

      10
    • 9 UP MIX

      10
    • 10 Listening mode indicators

      10
    • 11 (PHASE CONTROL)

      10
    • 12 Analog signal indicators

      10
    • 13 Tuner indicators

      10
    • 15 Master volume level

      10
    • 16 Input function indicators

      10
    • 17 Scroll indicators

      10
    • 18 Matrix decoding format indicators

      10
    • 19 Speaker indicators

      10
    • 20 SLEEP

      10
    • 21 MSTR

      10
    • 22 Character display

      10
    • 23 Remote control mode indicator

      10
  • Remote control

    11
    • 1 u RECEIVER

      11
    • 2 Input function buttons

      11
    • 3 Number buttons and other receiver/ component controls

      11
    • 4 TV CONTROL buttons

      12
    • 5 Tuner/component control buttons/HOME MENU

      12
    • 6 i/j/k/l (TUNE/PRESET) /ENTER

      12
    • 7 Receiver controls

      12
    • 8 Component control buttons

      12
    • 9 AUDIO - Changes the audio or channel on DVD discs.

      13
    • 10 REMOTE SETUP - Use to input the preset code when making remote control settings and to set the remote control mode (page 73).

      13
    • 11 MULTI-ZONE operation selector switch

      13
    • 12 Remote control LED

      13
    • 13 u SOURCE

      13
    • 14 MASTER VOLUME +/-

      13
    • 15 MUTE

      13
    • Operating range of remote control unit

      13
• Connecting your equipment

  14
  • Rear panel

    14
    • Important

      14
    • CAUTION

      14
  • Determining the speakers’ application

    15
    • [1] 7.1ch surround connection (Simple connection & Best surround)

      15
    • [2] 5.1ch surround & Front Bi-amping connection (High quality surround)

      15
    • [3] 5.1ch surround & Zone 2 connection (Multi Zone)

      15
    • [4] 5.1ch surround & Speaker B connection

      16
    • Other speaker connection

      16
  • Placing the speakers

    17
    • Some tips for improving sound quality

      17
  • Connecting the speakers

    18
    • CAUTION

      18
    • Bare wire connections

      18
      • 1 Twist exposed wire strands together. (fig. A)

        18
      • 2 Loosen terminal and insert exposed wire. (fig. B)

        18
      • 3 Tighten terminal. (fig. C)

        18
    • Banana plug connections

      18
      • Important

        18
      • CAUTION

        18
  • Installing your speaker system

    19
    • Standard 5.1/6.1/7.1-channel surround connections

      19
    • Bi-amping your speakers

      20
      • CAUTION

        20
    • Bi-wiring your speakers

      20
      • . To bi-wire a speaker, connect two speaker cables to the speaker terminal on the receiver.

        20
      • CAUTION

        20
  • Selecting the Surr Back system

    21
    • Zone 2 setup

      21
      • 1 Connect a pair of speakers to the surround back speaker terminals.

        21
      • 2 Select ‘ZONE 2’ from the Surr Back System menu.

        21
    • Speaker B setup

      21
      • 1 Connect a pair of speakers to the surround back speaker terminals.

        21
      • 2 Select ‘Speaker B’ from the Surr Back System menu.

        21
    • Bi-Amping setup

      21
      • 1 Connect a Bi-amp compatible speakers to the front and surround back speaker terminals.

        21
      • 2 Select the ‘Front Bi-Amp’ setting from the ‘Surr Back System’ menu.

        21
  • About the audio connection

    22
  • Sound signal priority l

    22
  • HDMI

    22
  • HD audio

    22
  • Digital (Coaxial)

    22
  • Conventional digital audio

    22
  • Digital (Optical)

    22
  • RCA (Analog)

    22
  • (White/Red)

    22
  • Conventional analog audio

    22
    • CAUTION

      22
    • About the video converter

      22
    • Connecting your TV and playback components

      23
      • Connecting using HDMI

        23
        • About HDMI

          24
      • Connecting your DVD player with no HDMI output

        25
      • Connecting your TV with no HDMI input

        26
    • Connecting a satellite/cable receiver or other set-top box

      27
    • Connecting a HDD/DVD recorder, VCR and other video sources

      28
    • Connecting the multichannel analog inputs

      28
    • Connecting other audio components

      29
      • About the WMA9 Pro decoder

        29
    • Connecting AM/FM antennas

      30
      • 1 Pull off the protective shields of both AM antenna wires.

        30
      • 2 Push open the tabs, then insert one wire fully into each terminal, then release the tabs to secure the AM antenna wires.

        30
      • 3 Fix the AM loop antenna to the attached stand.

        30
      • 4 Place the AM antenna on a flat surface and in a direction giving the best reception.

        30
      • 5 Connect the FM wire antenna in the same way as the AM loop antenna.

        30
      • Connecting external antennas

        30
    • MULTI-ZONE setup

      31
      • Making MULTI-ZONE connections

        31
        • MULTI-ZONE listening options

          31
        • Basic MULTI-ZONE setup (Zone 2)

          31
          • . Connect a separate amplifier to the AUDIO ZONE2 OUT jacks and a TV monitor to the VIDEO ZONE2 OUT jack, both on this receiver.

            31
        • MULTI-ZONE setup using speaker terminals (Zone 2)

          31
          • . Connect a TV monitor to the VIDEO ZONE2 OUT jacks on this receiver.

            31
    • Connecting an IR receiver

      32
      • 1 Connect the IR receiver sensor to the IR IN jack on the rear of this receiver.

        32
      • 2 Connect the IR IN jack of another component to the IR OUT jack on the rear of this receiver to link it to the IR receiver.

        32
    • Operating other Pioneer components with this unit’s sensor

      32
      • Important

        32
      • 1 Decide which component you want to use the remote sensor of.

        32
      • 2 Connect the CONTROL OUT jack of that component to the CONTROL IN jack of another Pioneer component.

        33
    • Connecting your SiriusConnect™ Tuner

      33
      • . Connect a SiriusConnect™ tuner to the SIRIUS IN jack on the rear of this receiver.

        33
    • Connecting a component to the front panel inputs

      34
    • Connecting an iPod

      34
      • . Switch the receiver into standby then use the supplied iPod cable to connect your iPod to the iPod/iPhone/USB terminal on the front panel of this receiver.

        34
    • Connecting a USB device

      35
      • . Switch the receiver into standby then connect your USB device to the iPod/iPhone/ USB terminal on the front panel of this receiver.

        35
    • Plugging in the receiver

      35
      • . Plug the AC power cord into a convenient AC power outlet.

        35
      • CAUTION

        35
• Basic Setup

  36
  • Switching the speaker impedance

    36
    • 1 Switch the receiver into standby.

      36
    • 2 While holding down ENTER on the front panel, press u STANDBY/ON.

      36
  • Changing the OSD display language (OSD Language)

    36
    • 1 Press on the remote control, then press HOME MENU.

      36
    • 2 Select ‘System Setup’ from the HOME MENU.

      36
    • 3 Select ‘OSD Language’ from the System Setup menu.

      36
    • 4 Select the desired language.

      36
    • 5 Select ‘OK’ to change the language.

      36
  • Automatically setting up for surround sound (Auto MCACC)

    37
    • Important

      37
    • CAUTION

      37
    • 1 Switch on the receiver and your TV.

      37
    • 2 Connect the microphone to the MCACC SETUP MIC jack on the front panel.

      37
    • 3 Select Surr Back System setting, select an MCACC preset, press and then select START.

      37
    • 4 Follow the instructions on-screen.

      38
    • 5 Wait for the test tones to finish, then confirm the speaker configuration in the GUI screen.

      38
    • 6 Make sure ‘OK’ is selected, then press ENTER.

      38
    • 7 The Auto MCACC Setup procedure is completed and the Home Menu menu reappears automatically.

      39
    • Problems when using the Auto MCACC Setup

      39
  • The Input Setup menu

    39
    • 1 Switch on the receiver and your TV.

      39
    • 2 Press on the remote control, then press HOME MENU.

      39
    • 3 Select ‘System Setup’ from the HOME MENU.

      39
    • 4 Select ‘Input Setup’ from the System Setup menu.

      39
    • 5 Select the input function that you want to set up.

      39
    • 6 Select the input(s) to which you’ve connected your component.

      40
    • 7 When you’re finished, proceed to the settings for other inputs.

      40
    • 8 When you’re finished, press RETURN.

      40
    • Input function default and possible settings

      40
• Basic playback

  41
  • Playing a source

    41
    • 1 Switch on your system components and receiver.

      41
    • 2 Select the input function you want to play.

      41
    • 3 Press AUTO/ALC/DIRECT (AUTO SURR/ ALC/STREAM DIRECT) to select ‘AUTO SURROUND’ and start playback of the source.

      41
    • 4 Use the volume control to adjust the volume level.

      41
    • Playing a source with HDMI connection

      42
      • . Use INPUT SELECT to select the HDMI input you’ve connected to (for example, HDMI 1).

        42
    • Selecting the multichannel analog inputs

      42
      • 1 Make sure you have set the playback source to the proper output setting.

        42
      • 2 Use INPUT SELECT to select MULTI CH IN.

        42
  • Playing an iPod

    43
    • 1 Switch on the receiver and your TV.

      43
    • 2 Press iPod USB on the remote control to switch the receiver to the iPod/USB.

      43
    • Playing back audio files stored on an iPod

      43
      • Finding what you want to play

        43
        • 1 Use i/j to select a category, then press ENTER to browse that category.

          43
        • 2 Use i/j to browse the selected category (e.g., albums).

          43
        • 3 Continue browsing until you arrive at what you want to play, then press d to start playback.

          43
          • Tip

            44
      • Basic playback controls

        44
      • Switching the iPod controls

        44
        • 1 Press iPod CTRL to switch the iPod controls.

          44
        • 2 Press iPod CTRL again to switch back to the receiver controls.

          44
  • Playing a USB device

    45
    • 1 Switch on the receiver and your TV.

      45
    • 2 Press iPod USB on the remote control to switch the receiver to the iPod/USB.

      45
      • Important

        45
    • Playing back audio files stored on a USB memory device

      45
      • 1 Use i/j to select ‘Music’ from the USB Top menu.

        46
      • 2 Use i/j to select a folder, then press ENTER to browse that folder.

        46
      • 3 Continue browsing until you arrive at what you want to play, then press d to start playback.

        46
      • Basic playback controls

        46
    • Playing back photo files stored on a USB memory device

      47
      • 1 Use i/j to select ‘Photos’ from the USB Top menu.

        47
      • 2 Use i/j to select a folder, then press ENTER to browse that folder.

        47
      • 3 Continue browsing until you arrive at what you want to play, then press d to start playback.

        47
      • Basic playback controls

        47
      • Slideshow Setup

        47
        • 1 Use i/j to select ‘Slideshow Setup’ from the USB Top menu.

          47
        • 2 Select the setting you want.

          47
        • 3 When you’re finished, press RETURN.

          47
    • About playable file formats

      48
      • Music files

        48
      • Photo files

        48
  • Using SIRIUS Radio

    49
    • . Press SIRIUS to switch to the SIRIUS input.

      49
    • Listening to SIRIUS Radio

      49
      • Selecting channels and browsing by genre

        50
        • 1 Press i/j to enter the SIRIUS Channel Guide, then navigate through the channels one at time with i/j, then press ENTER to listen to the SIRIUS radio broadcast.

          50
          • Tip

            50
    • Saving channel presets

      50
      • 1 Select the channel you want to memorize.

        50
      • 2 Press T.EDIT.

        50
      • 3 Press CLASS to select one of the seven classes, then press k/l to select the channel preset you want.

        50
      • 4 Press ENTER.

        50
        • Tip

          50
      • Listening to channel presets

        50
        • 1 Press CLASS to select the class in which the channel is stored.

          50
        • 2 Press k/l to select the channel preset you want.

          50
    • Using the SIRIUS Menu

      51
      • 1 Press TOP MENU.

        51
      • 2 Use i/j to select a menu item, then press ENTER.

        51
      • 3 When you’re finished press TOP MENU to return to the reception display.

        51
  • Listening to the radio

    51
    • 1 Press TUNER to select the tuner.

      51
    • 2 Use BAND to change the band (FM or AM), if necessary.

      51
    • 3 Tune to a station.

      51
    • Improving FM sound

      51
    • Using Neural THX

      51
    • Tuning directly to a station

      51
      • 1 Press TUNER to select the tuner.

        51
      • 2 Use BAND to change the band (FM or AM), if necessary.

        51
      • 3 Press D.ACCESS (Direct Access).

        52
      • 4 Use the number buttons to enter the frequency of the radio station.

        52
    • Saving station presets

      52
      • 1 Tune to a station you want to memorize.

        52
      • 2 Press T.EDIT (TUNER EDIT).

        52
      • 3 Press CLASS to select one of the seven classes, then press PRESET k/l to select the station preset you want.

        52
      • 4 Press ENTER.

        52
    • Naming station presets

      52
      • 1 Choose the station preset you want to name.

        52
      • 2 Press T.EDIT (TUNER EDIT).

        52
      • 3 Input the name you want.

        52
        • Tip

          52
    • Listening to station presets

      52
      • 1 Press TUNER to select the tuner.

        52
      • 2 Press CLASS to select the class in which the station is stored.

        52
      • 3 Press PRESET k/l to select the station preset you want.

        52
• Listening to your system

  53
  • Important

    53
  • Auto playback

    53
    • . While listening to a source, press , then press AUTO/ALC/DIRECT (AUTO SURR/ALC/STREAM DIRECT) for auto playback of a source.

      53
    • Tip

      53
  • Listening in surround sound

    53
    • Standard surround sound

      53
      • . While listening to a source, press , then press STANDARD (STANDARD SURROUND).

        53
    • Using the Advanced surround effects

      54
      • . Press , then press ADV SURR (ADVANCED SURROUND) repeatedly to select a listening mode.

        54
      • Tip

        55
  • Listening in stereo

    55
    • . While listening to a source, press , then press STEREO for stereo playback.

      55
  • Using Front Stage Surround Advance

    55
    • . While listening to a source, press , then press STEREO to select Front Stage Surround Advance modes.

      55
  • Using Stream Direct

    56
    • . While listening to a source, press , then press AUTO/ALC/DIRECT (AUTO SURR/ALC/STREAM DIRECT) to select the mode you want.

      56
  • Using surround back channel processing

    56
    • . Press , then press SBch repeatedly to cycle the surround back channel options.

      56
    • Using the Virtual Surround Back mode

      57
      • . Press SBch repeatedly to cycle the virtual surround back channel options.

        57
  • Setting the Up Mix function

    57
    • 1 Switch the receiver into standby.

      57
    • 2 While holding down ENTER on the front panel, press u STANDBY/ON.

      57
    • 3 Press ENTER to confirm.

      57
  • Selecting MCACC presets

    58
    • . While listening to a source, press , then press MCACC.

      58
  • Choosing the input signal

    58
    • . Press , then press SIGNAL SEL to select the input signal corresponding to the source component.

      58
  • Better sound using Phase Control

    59
    • . Press , then press PHASE CTRL (PHASE CONTROL) to switch on phase correction.

      59
• KURO LINK

  60
  • Making the KURO LINK connections

    60
    • Important

      60
    • Cautions on the KURO LINK function

      61
    • About connections with a product of a different brand that supports the KURO LINK function

      61
  • KURO LINK Setup

    62
    • 1 Press , then press Home Menu.

      62
    • 2 Select ‘System Setup’, then press ENTER.

      62
    • 3 Select ‘Other Setup’, then press ENTER.

      62
    • 4 Select the ‘KURO LINK’ setting you want.

      62
    • 5 Select the ‘Display Power Off’ setting you want.

      62
    • 6 When you’re finished, press HOME MENU.

      62
  • Setting the PQLS function

    62
    • 1 Press , then press PQLS to select PQLS setting.

      62
  • Before using synchronization

    63
    • 1 Put all components into standby mode.

      63
    • 2 Turn the power on for all components, with the power for the flat panel TV being turned on last.

      63
    • 3 Choose the HDMI input to which the TV is connected to this receiver, and see if video output from connected components displays properly on the screen or not.

      63
    • 4 Check whether the components connected to all HDMI inputs are properly displayed.

      63
  • Synchronized amp mode

    63
    • Synchronized amp mode operations

      63
    • Canceling synchronized amp mode

      63
• Using other functions

  64
  • Setting the Audio options

    64
    • Important

      64
    • 1 Press , then press AUDIO PARAMETER.

      64
    • 2 Use i/j to select the setting you want to adjust.

      64
    • 3 Use k/l to set it as necessary.

      64
    • 4 Press RETURN to confirm and exit the menu.

      64
  • Setting the Video options

    67
    • Important

      67
    • 1 Press , then press VIDEO PARAMETER.

      67
    • 2 Use i/j to select the setting you want to adjust.

      67
    • 3 Use k/l to set it as necessary.

      67
    • 4 Press RETURN to confirm and exit the menu.

      67
  • Switching the speaker system

    69
    • . Use SPEAKERS on the front panel to select a speaker system setting.

      69
  • Using the MULTI-ZONE controls

    69
    • 1 Press the MULTI-ZONE ON/OFF button on the front panel.

      69
    • 2 Press MULTI-ZONE CONTROL on the front panel.

      69
    • 3 Use the INPUT SELECTOR dial to select the source for the sub zone.

      69
    • 4 Use the MASTER VOLUME dial to adjust the volume for the sub zone.

      70
    • 5 When you’re finished, press MULTI-ZONE CONTROL again to return to the main zone controls.

      70
    • MULTI-ZONE remote controls

      70
  • Making an audio or a video recording

    70
    • 1 Select the source you want to record.

      70
    • 2 Prepare the source you want to record.

      70
    • 3 Prepare the recorder.

      71
    • 4 Start recording, then start playback of the source component.

      71
  • Reducing the level of an analog signal

    71
    • . Press , then press A.ATT to switch the input attenuator on or off.

      71
  • Using the sleep timer

    71
    • . Press , then press SLEEP repeatedly to set the sleep time.

      71
  • Dimming the display

    71
    • . Press , then press DIMMER repeatedly to change the brightness of the front panel display.

      71
  • Checking your system settings

    71
    • 1 Press , then press STATUS to check the system settings.

      71
    • 2 When you’re finished, press STATUS again to switch off the display.

      71
  • Resetting the system

    72
    • 1 Switch the receiver into standby.

      72
    • 2 While holding down ENTER on the front panel, press u STANDBY/ON.

      72
    • 3 Select ‘RESET’ using PRESET +/-, then press ENTER on the front panel.

      72
    • 4 Press ENTER to confirm.

      72
    • Default system settings

      72
• Controlling the rest of your system

  73
  • Operating multiple receivers

    73
    • 1 Check the operation selector switch to MAIN.

      73
    • 2 Press .

      73
    • 3 Press and hold REMOTE SETUP, then release it after the LED flashes twice.

      73
    • 4 Use the number buttons to enter the 5- digit preset code (see below).

      73
  • Setting the remote to control other components

    73
    • Note

      73
  • Selecting preset codes directly

    73
    • 1 Press the input function button for the component you want to control.

      73
    • 2 Press and hold REMOTE SETUP, then release it after the LED flashes twice.

      73
    • 3 Use the number buttons to enter the 5- digit preset code.

      73
    • 4 Repeat steps 1 through 3 for the other components you want to control.

      74
  • Resetting the remote control presets

    74
    • 1 Check the operation selector switch to MAIN.

      74
    • 2 Press .

      74
    • 3 Press and hold REMOTE SETUP, then release it after the LED flashes twice.

      74
    • 4 Use the number buttons to enter 9, 8, 1.

      74
    • Default preset codes

      74
  • DVD

    74
  • BD

    74
  • DVR

    74
  • HDMI

    74
  • TV

    74
  • CD

    74
  • CD-R

    74
  • VIDEO

    74
  • TV CTRL

    74
    • Controls the components

      74
  • a. Controls for SACD.

    76
  • b. Controls for MD.

    76
• The Advanced MCACC menu

  77
  • Making receiver settings from the Advanced MCACC menu

    77
    • 1 Switch on the receiver and your TV.

      77
    • 2 Press on the remote control, then press HOME MENU.

      77
    • 3 Select ‘Advanced MCACC’ from the HOME MENU, then press ENTER.

      77
    • 4 Select the setting you want to adjust.

      77
  • Automatic MCACC (Expert)

    78
    • Important

      78
    • CAUTION

      78
    • THX®

      78
      • 1 Select ‘Auto MCACC’ from the Advanced MCACC menu, then press ENTER.

        78
      • 2 Select the parameters you want to set.

        78
      • 3 Connect the microphone to the MCACC SETUP MIC jack on the front panel.

        79
      • 4 When you’re finished settings the options, select START then press ENTER.

        80
      • 5 Follow the instructions on-screen.

        80
      • 6 Wait for the Auto MCACC Setup to finish outputting test tones.

        80
      • 7 If necessary, confirm the speaker configuration in the GUI screen.

        80
      • 8 Make sure ‘OK’ is selected, then press ENTER.

        81
      • 9 The Auto MCACC Setup procedure is completed and the Advanced MCACC menu reappears automatically.

        81
  • Manual MCACC setup

    82
    • CAUTION

      82
    • Important

      82
    • 1 Select ‘Manual MCACC’ from the Advanced MCACC menu.

      82
    • 2 Select the setting you want to adjust.

      82
    • Fine Channel Level

      83
      • 1 Select ‘Fine Channel Level’ from the Manual MCACC setup menu.

        83
      • 2 Adjust the level of the left channel.

        83
      • 3 Select each channel in turn and adjust the levels (+/-10.0 dB) as necessary.

        83
      • 4 When you’re finished, press RETURN.

        83
    • Fine Speaker Distance

      83
      • 1 Select ‘Fine SP Distance’ from the Manual MCACC setup menu.

        84
      • 2 Adjust the distance of the left channel from the listening position.

        84
      • 3 Select each channel in turn and adjust the distance as necessary.

        84
      • 4 When you’re finished, press RETURN.

        84
    • Standing Wave

      85
      • 1 Select ‘Standing Wave’ from the Manual MCACC setup menu.

        85
      • 2 Adjust the parameters for the Standing Wave Control.

        85
      • 3 When you’re finished, press RETURN.

        85
    • Acoustic Calibration EQ Adjust

      85
      • 1 Select ‘EQ Adjust’ from the Manual MCACC setup menu.

        86
      • 2 Select the channel(s) you want and adjust to your liking.

        86
        • Tip

          86
      • 3 When you’re finished, press RETURN.

        86
    • Acoustic Calibration EQ Professional

      86
      • How to use Acoustic Calibration EQ Professional

        86
      • Using Acoustic Calibration EQ Professional

        87
        • 1 Select ‘EQ Professional’, then press ENTER.

          87
        • 2 Select an option and press ENTER.

          87
        • 3 If you selected ‘Reverb Measurement’, select EQ ON or OFF, and then START.

          87
        • 4 If you selected ‘Reverb View’, you can check the reverb characteristics for each channel. Press RETURN when you’re done.

          88
        • 5 If ‘Advanced EQ Setup’ is selected, select the MCACC memory to be stored, then enter the desired time setting for calibration, and then select START.

          88
  • Checking MCACC Data

    89
    • 1 Press , then press HOME MENU.

      89
    • 2 Select ‘MCACC Data Check’ from the HOME MENU.

      89
    • 3 Select the setting you want to check.

      89
    • 4 Press RETURN to go back to MCACC Data Check menu, repeating steps 2 and 3 to check other settings.

      89
    • 5 When you’re finished, press RETURN.

      89
    • Speaker Setting

      89
      • 1 Select ‘Speaker Setting’ from the MCACC Data Check menu.

        89
      • 2 Select the channel you want to check.

        89
    • Channel Level

      89
      • 1 Select ‘Channel Level’ from the MCACC Data Check menu.

        90
      • 2 When ‘MCACC’ is highlighted, use k/l to select the MCACC preset you want to check.

        90
    • Speaker Distance

      90
      • 1 Select ‘Speaker Distance’ from the MCACC Data Check menu.

        90
      • 2 When ‘MCACC’ is highlighted, use k/l to select the MCACC preset you want to check.

        90
    • Standing Wave

      90
      • 1 Select ‘Standing Wave’ from the MCACC Data Check menu.

        90
      • 2 When ‘Filter Channel’ is highlighted, use i/j to select the channel for which you want to check standing wave control.

        90
      • 3 Press k to highlight ‘MCACC’, then use i/j to select the MCACC preset you want to check.

        90
    • Acoustic Cal EQ

      90
      • 1 Select ‘Acoustic Cal EQ’ from the MCACC Data Check menu.

        90
      • 2 When ‘Ch’ is highlighted, use i/j to select the channel.

        90
      • 3 Press k to highlight ‘MCACC’, then use i/j to select the MCACC preset you want to check.

        90
  • Data Management

    91
    • 1 Press , then press HOME MENU.

      91
    • 2 Select ‘Data Management’ from the HOME MENU.

      91
    • 3 Select the setting you want to adjust.

      91
    • Renaming MCACC presets

      91
      • 1 Select ‘Memory Rename’ from the Data Management setup menu.

        91
      • 2 Select the MCACC preset you want to rename, then select an appropriate preset name.

        91
      • 3 Repeat for as many MCACC presets as necessary, then press RETURN when you’re finished.

        91
    • Copying MCACC preset data

      92
      • 1 Select ‘MCACC Memory Copy’ from the Data Management setup menu.

        92
      • 2 Select the setting you want to copy.

        92
      • 3 Select the MCACC preset you’ll be copying the settings ‘From’, then specify where you want to copy them (‘To’).

        92
      • 4 Select ‘OK’ to confirm and copy the settings.

        92
    • Clearing MCACC presets

      92
      • 1 Select ‘MCACC Memory Clear’ from the Data Management setup menu.

        92
      • 2 Select the MCACC preset you want to clear.

        92
      • 3 Select ‘OK’ to confirm and clear the preset.

        92
• The system and the other setup

  93
  • Making receiver settings from the System Setup menu

    93
    • 1 Switch on the receiver and your TV.

      93
    • 2 Press , then press HOME MENU.

      93
    • 3 Select ‘System Setup’ from the HOME MENU, then press ENTER.

      93
    • 4 Select the setting you want to adjust.

      93
  • Manual speaker setup

    94
    • CAUTION

      94
    • 1 Select ‘Manual SP Setup’, then press ENTER.

      94
    • 2 Select the setting you want to adjust.

      94
    • 3 Make the adjustments necessary for each setting, pressing RETURN to confirm after each screen.

      94
    • Surround back speaker setting

      94
      • 1 Select ‘Surr Back System’ from the Manual SP Setup menu.

        94
      • 2 Select the surround back speaker setting.

        95
      • 3 When ‘Setting Change?’ is displayed, select Yes.

        95
    • Speaker Setting

      95
      • 1 Select ‘Speaker Setting’ from the Manual SP Setup menu.

        95
      • 2 Choose the set of speakers that you want to set, then select a speaker size.

        95
      • 3 Select ‘X. OVER’ and set the crossover frequency.

        96
      • 4 When you’re finished, press RETURN.

        96
    • Channel Level

      96
      • 1 Select ‘Channel Level’ from the Manual SP Setup menu.

        96
      • 2 Select a setup option.

        96
      • 3 Confirm your selected setup option.

        97
      • 4 Adjust the level of each channel using k/ l.

        97
      • 5 When you’re finished, press RETURN.

        97
        • Tip

          97
    • Speaker Distance

      97
      • 1 Select ‘Speaker Distance’ from the Manual SP Setup menu.

        97
      • 2 Adjust the distance of each speaker using k/l.

        97
      • 3 When you’re finished, press RETURN.

        97
        • Tip

          97
    • X-Curve

      98
      • 1 Select ‘X-Curve’ from the Manual SP Setup menu.

        98
      • 2 Choose the X-Curve setting you want.

        98
      • 3 When you’re finished, press RETURN.

        98
  • The Other Setup menu

    98
    • 1 Press on the remote control, then press HOME MENU.

      98
    • 2 Select ‘System Setup’ from the HOME MENU.

      98
    • 3 Select ‘Other Setup’, then press ENTER.

      98
    • 4 Select the setting you want to adjust.

      98
    • 5 Make the adjustments necessary for each setting, pressing RETURN to confirm after each screen.

      99
    • Multi Channel Input Setup

      99
      • 1 Select ‘Multi Ch In Setup’ from the Other Setup menu.

        99
      • 2 Select the ‘SW Input Gain’ setting you want.

        99
      • 3 Select the ‘Video Input’ setting you want.

        99
      • 4 When you’re finished, press RETURN.

        99
    • ZONE Audio Setup

      99
      • 1 Select ‘ZONE Audio Setup’ from the Other Setup menu.

        99
      • 2 Select the volume level setting of ZONE 2.

        99
      • 3 When you’re finished, press RETURN.

        100
    • Power ON Level Setup

      100
      • 1 Select ‘Power ON Level Setup’ from the Other Setup menu.

        100
      • 2 Select the Power ON Level setting you want.

        100
      • 3 When you’re finished, press RETURN.

        100
    • Volume Limit Setup

      100
      • 1 Select ‘Volume Limit Setup’ from the Other Setup menu.

        100
      • 2 Select the Volume Limit setting you want.

        100
      • 3 When you’re finished, press RETURN.

        100
    • Remote Control Mode Setup

      101
      • 1 Select ‘Remote Control Mode Setup’ from the Other Setup menu.

        101
      • 2 Select the Remote Control Mode setting you want.

        101
      • 3 Select “OK” to change the remote control mode.

        101
      • 4 Follow the instructions on the screen to change the remote control’s setting.

        101
      • 5 When you’re finished, press RETURN.

        101
    • Flicker Reduction Setup

      101
      • 1 Select ‘Flicker Reduction Setup’ from the Other Setup menu.

        101
      • 2 Select the Flicker Reduction setting you want.

        101
      • 3 When you’re finished, press RETURN.

        101
      • General

        116
      • Plasma Television

        118
      • LCD

        118
      • HDTV

        118
      • Rear Projection TV

        118
      • TV/DVD Combination

        118
      • TV/VCR Combination

        118
      • General

        119
      • PVR

        120
      • General

        120
      • Blu-ray

        121
      • HD-DVD

        121
      • DVD-R

        121
      • DVD/PVR Combination

        121
      • DVD/VCR Combination

        122
      • General

        122
      • CD-R

        122
      • MD

        122
      • General

        123
      • SAT/PVR Combination

        123
      • General

        123
      • Cable/PVR Combination

        124
• Additional information

  102
  • Troubleshooting

    102
    • Note

      102
    • Power

      102
    • No sound

      103
    • Other audio problems

      105
    • Video

      106
    • Settings

      106
    • Professional Calibration EQ graphical output

      107
    • Display

      108
    • Remote control

      109
    • HDMI

      109
    • Important information regarding the HDMI connection

      110
      • Configuration A

        110
        • Note

          110
      • Configuration B

        111
        • Note

          111
    • USB interface

      111
    • SIRIUS radio messages

      112
  • Surround sound formats

    113
    • Dolby

      113
    • DTS

      113
    • Windows Media Audio 9 Professional

      113
  • About iPod

    113
  • About SIRIUS

    114
  • About Neural - THX Surround

    114
  • Auto Surround, ALC and Stream Direct with different input signal formats

    115
    • Stereo (2 channel) signal formats

      115
    • Multichannel signal formats

      115
  • Preset code list

    116
  • Specifications

    125
    • Amplifier section

      125
    • Audio Section

      125
    • Tuner Section

      125
    • Video Section

      125
    • Digital In/Out Section

      125
    • Integrated control section

      125
    • Miscellaneous

      125
    • Furnished Parts Number

      125
      • Note

        125
  • Cleaning the unit

    126