Manuali utente per Runco dtv-940-943

Sommario

• TABLE OF CONTENTS

  1
• SAFETY INSTRUCTIONS

  1
• safety

  1
• installation

  1
• servicing

  1
• cleaning

  1
• repacking

  1
• illumination

  1
• LOCATION AND FUNCTION OF CONTROLS

  2
• Rear Panel Description

  2
• Remote Control Description

  2
• CONNECTIONS

  3
• Power (mains) cord connection

  3
• Switching on/off

  3
• Signal input connection to the projector

  3
• Connecting a Composite Video Source

  3
• Connecting an S-Video source to Port 2

  3
• Connecting an RGB Analog source with composite sync

  3
• Connecting an RGB Analog source with Tri-level sync

  3
• Connecting a Component source

  3
• Connecting a Component source with Tri-level sync

  3
• the projector

  3
• CONTROLLING

  4
• How to use the RCU

  4
• Projector address

  4
• How to display a projector address

  4
• How to program an address into the RCU

  4
• Input selection

  4
• Picture controls

  4
• The Pause key

  4
• START UP OF THE ADJUSTMENT MODE

  5
• Adjustment mode

  5
• RANDOM ACCESS ADJUSTMENT MODE

  6
• Starting up the Random Access Adjustment mode

  6
• Overview ‘Random Access Adjustment’ mode

  6
• Selecting Setup Pattern

  6
• Internal Cross Hatch Pattern

  6
• Random Access Adjustment Mode selection menu

  6
• Picture Tuning

  6
• Color Balance

  6
• Sync Fast/Slow Adjustment

  6
• Peaking

  6
• Color Select

  6
• Geometry Adjustments

  6
• Horizontal Phase Adjustment

  6
• Raster Shift Adjustment

  6
• Left-Right (eat-west) Adjustments

  6
• Top-Bottom (north-south) Adjustments

  6
• Size Adjustment

  6
• Vertical Linearity Adjustment

  6
• Blanking Adjustments

  6
• Convergence Adjustment

  6
• SERVICE MODE

  7
• Starting up the Service mode

  7
• Overview flowchart ‘Service’ mode

  7
• Projector Set-up

  7
• Identification

  7
• Total Run Time

  7
• Change Password

  7
• Change Language

  7
• Change Projector Address

  7
• Change Baudrate

  7
• Power up mode

  7
• Memory Management

  7
• Copy a block

  7
• Deletion of blocks

  7
• Deleting block by block

  7
• Deletion of all blocks

  7
• All settings to midposition

  7
• Undo all settings to midposition

  7
• R & B convergence mid

  7
• Undo R & B convergence mid

  7
• Green convergence mid

  7
• Undo green convergence mid

  7
• Common Settings

  7
• G2 Adjustment

  7
• CRT run in cycle

  7
• Projector warm-up

  7
• Memorybanks

  7
• I2C Diagnostics

  7
• MESSAGES, WARNINGS, AND FAILURES

  8
• RS 232 CONTROL

  9
• Hardware Configuration

  9
• How to format the control data

  9
• Sending a RECORD (single instruction)

  9
• Example string to send to the projector with address 3 to turn it on/off

  9
• COMMAND CODE LIST

  9
• EYE-Q™ Autoconvergence

  10
• Overview

  10
• THE QUICK GUIDE to using the EYE-Q™ system

  10
• Easy-to-use, high precision automatic convergence system

  10
• Easy-to-use, high precision automatic geometry system

  10
• Compact built-in system

  10
• Preparing your EYE-Q™

  10
• ON-SCREEN OPERATING INSTRUCTIONS

  10
• ACCESS TO EYE-Q™ ON-SCREEN MENUS

  10
• EYE-Q™ MENU

  10
• EYE-Q™ SETUP

  10
• Setting the Configuration

  10
• FOCUSING THE CAMERA LENS

  10
• CENTERING THE CAMERA

  10
• Centering The Camera Horizontally

  10
• Centuring The Camera Vertically

  10
• SET TOUCH-UP OPTIONS

  10
• Touch-Up On Source On/Off

  10
• Touch-Up On Timer

  10
• Reference Source

  10
• Adjusting Other Sources

  10
• Learning A Reference

  10
• WHAT IS BEING MEASURED BY EYE-Q™

  10
• TOUCH UP AND AUTOCONVERGENCE

  10
• Adjusting Screen Size

  10
• On Current Source

  10
• Touch-Up

  10
• Align On Current Source

  10
• Align From Midposition On Current Source

  10
• On All Sources

  10
• Touch-Up On All Sources

  10
• Align On All Sources

  10
• Error Messages

  10
• No Pattern Error

  10
• Status Reporting Forced Break

  10
• EYE-Q™ DIAGNOSTICS

  10