Manuale UtenteSommario<GRAPHIC>1<GRAPHIC>1<GRAPHIC>1850/10501Operating Instructions1SYSTEM SETTINGS1Read this manual carefully before you use this product and keep it handy for future reference.1Read this manual carefully before you use this product and keep it handy for future reference.1Read this manual carefully before you use this product and keep it handy for future reference.1For safety, please follow the instructions in this manual.1Note to users in the United States of America2Note to users in the United States of America2Note to users in the United States of America2Notice:2Notice:2Notice:2This equipment has been tested and found to comply with the limits for a Class B digital device, ...2Warning2Warning2Changes or modifications not expressly approved by the party responsible for compliance could voi...21. Properly shielded and grounded cables and connectors must be used for connections to host comp...21. Properly shielded and grounded cables and connectors must be used for connections to host comp...21. Properly shielded and grounded cables and connectors must be used for connections to host comp...21. Properly shielded and grounded cables and connectors must be used for connections to host comp...21. Properly shielded and grounded cables and connectors must be used for connections to host comp...22. AC adapter with ferrite core must be used for RF interference suppression.22. AC adapter with ferrite core must be used for RF interference suppression.2This device complies with Part 15 of FCC Rules.2This device complies with Part 15 of FCC Rules.2This device complies with Part 15 of FCC Rules.2Operation is subject to the following two conditions:2Ricoh Corporation, 5 Dedrick Place, West Caldwell, NJ 070062Note to users in Canada2Note to users in Canada2Note:2Note:2Note:2This Class B digital apparatus complies with Canadian ICES-003.2Remarque concernant les utilisateurs au Canada2Remarque concernant les utilisateurs au Canada2Avertissement:2Avertissement:2Avertissement:2Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.2In accordance with IEC 60417, this machine uses the following symbols for the main power switch:2In accordance with IEC 60417, this machine uses the following symbols for the main power switch:2In accordance with IEC 60417, this machine uses the following symbols for the main power switch:2Copyright © 20002Copyright © 20002Ricoh Co., Ltd.2Introduction3Introduction3Introduction3This manual contains detailed instructions on the operation and maintenance of this machine. To g...3This manual contains detailed instructions on the operation and maintenance of this machine. To g...3Please read the Safety Information before using this machine. It contains important information r...3Notes3Notes3Some illustrations might be slightly different from your machine.3Certain options might not be available in some countries. For details, please contact your local ...3Operator Safety:3Operator Safety:3This machine is considered a CDRH class 1 laser device, safe for office/EDP use. The machine cont...3This machine is considered a CDRH class 1 laser device, safe for office/EDP use. The machine cont...3Laser Safety:3Laser Safety:3The Center for Devices and Radiological Health (CDRH) prohibits the repair of laser-based optical...3The Center for Devices and Radiological Health (CDRH) prohibits the repair of laser-based optical...3Warning:3Warning:3Use of controls or adjustment or performance of procedures other than those specified in this man...3Use of controls or adjustment or performance of procedures other than those specified in this man...3The model names of the machines do not appear in the following pages. Check the type of your mach...3The model names of the machines do not appear in the following pages. Check the type of your mach...3The model names of the machines do not appear in the following pages. Check the type of your mach...3• Type 1 : 2085DP/32853• Type 1 : 2085DP/32853• Type 1 : 2085DP/32853• Type 2 : 2105DP/321053• Type 2 : 2105DP/321053Certain types might not be available in some countries. For details, please contact your local de...3Two kinds of size notation are employed in this manual. With this machine refer to the inch version.3Two kinds of size notation are employed in this manual. With this machine refer to the inch version.3Two kinds of size notation are employed in this manual. With this machine refer to the inch version.3For good copy quality, Savin recommends that you use genuine toner.3For good copy quality, Savin recommends that you use genuine toner.3For good copy quality, Savin recommends that you use genuine toner.3Savin shall not be responsible for any damage or expense that might result from the use of parts ...3Savin shall not be responsible for any damage or expense that might result from the use of parts ...3Savin shall not be responsible for any damage or expense that might result from the use of parts ...3Power Source3Power Source3• Type 1 : 240V, 60Hz, 10A or more3• Type 1 : 240V, 60Hz, 10A or more3• Type 1 : 240V, 60Hz, 10A or more3• Type 1 : 240V, 60Hz, 10A or more3• Type 2 : 240V, 60Hz, 12A or more3• Type 2 : 240V, 60Hz, 12A or more3Please be sure to connect the power cord to a power source as above. For details about power sour...3Read this manual carefully before you use this product and keep it handy for future reference.3Read this manual carefully before you use this product and keep it handy for future reference.3Read this manual carefully before you use this product and keep it handy for future reference.3For safety, please follow the instructions in this manual.3Note to users in the United States of America4Note to users in the United States of America4Note to users in the United States of America4Notice:4Notice:4Notice:4This equipment has been tested and found to comply with the limits for a Class B digital device, ...4Warning4Warning4Changes or modifications not expressly approved by the party responsible for compliance could voi...41. Properly shielded and grounded cables and connectors must be used for connections to host comp...41. Properly shielded and grounded cables and connectors must be used for connections to host comp...41. Properly shielded and grounded cables and connectors must be used for connections to host comp...41. Properly shielded and grounded cables and connectors must be used for connections to host comp...41. Properly shielded and grounded cables and connectors must be used for connections to host comp...42. AC adapter with ferrite core must be used for RF interference suppression.42. AC adapter with ferrite core must be used for RF interference suppression.4This device complies with Part 15 of FCC Rules.4This device complies with Part 15 of FCC Rules.4This device complies with Part 15 of FCC Rules.4Operation is subject to the following two conditions:4SAVIN CORPORATION, 333 Ludlow Street, Stamford, CT 069044Note to users in Canada4Note to users in Canada4Note:4Note:4Note:4This Class B digital apparatus complies with Canadian ICES-003.4Remarque concernant les utilisateurs au Canada4Remarque concernant les utilisateurs au Canada4Avertissement:4Avertissement:4Avertissement:4Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.4In accordance with IEC 60417, this machine uses the following symbols for the main power switch:4In accordance with IEC 60417, this machine uses the following symbols for the main power switch:4In accordance with IEC 60417, this machine uses the following symbols for the main power switch:4SAVIN CORPORATION4SAVIN CORPORATION4333 Ludlow Street, Stamford, CT 069044333 Ludlow Street, Stamford, CT 069044ENERGY STAR Program5ENERGY STAR Program5ENERGY STAR Program5<TABLE>5<TABLE>5<TABLE>5<TABLE BODY>5<TABLE ROW>5As an ENERGY STAR Partner, we have determined that this machine model meets the ENERGY STAR Guide...5As an ENERGY STAR Partner, we have determined that this machine model meets the ENERGY STAR Guide...5<TABLE>5<TABLE>5<TABLE BODY>5<TABLE ROW>5The ENERGY STAR Guidelines intend to establish an international energy-saving system for developi...5The ENERGY STAR Guidelines intend to establish an international energy-saving system for developi...5When a product meets the ENERGY STAR Guidelines for energy efficiency, the Partner shall place th...5This product was designed to reduce the environmental impact associated with office equipment by ...5• Low Power mode5• Low Power mode5• Low Power mode5This product automatically lowers its power consumption 15 minutes after the last copying or prin...5For how to change the default interval before entering Low Power mode, see “Energy Saver Timer”5• Auto Off mode5• Auto Off mode5To conserve energy, this product automatically turns off 90 minutes (Type2:120 minutes) after the...5For how to change the default interval before entering Auto Off mode, see “Auto Off Timer”5• Duplex Priority5• Duplex Priority5To conserve paper resources, the Duplex function (1-Sided Æ 2-Sided) is selected preferentially w...5Specification6Specification6Specification6<TABLE>6<TABLE>6<TABLE>6<TABLE BODY>6<TABLE ROW>6Type 16Type 26<TABLE ROW>6Low Power mode6Power consumption6312W6320W6<TABLE ROW>6Default interval615 minutes615 minutes6<TABLE ROW>6Recovery time6Less than 40 seconds6Less than 42 seconds6<TABLE ROW>6Auto Off mode6Power consumption612W612W6<TABLE ROW>6Default interval690 minutes6120 minutes6<TABLE>6<TABLE>6<TABLE BODY>6<TABLE ROW>6Duplex Priority6Duplex Priority61-Sided Æ 2-Sided61-Sided Æ 2-Sided6- Recycled Paper6- Recycled Paper6Please contact your sales or service representative for recommended recycled paper types that may...6How To Read This Manual7How To Read This Manual7Symbols7Symbols7In this manual, the following symbols are used:7In this manual, the following symbols are used:7This symbol indicates a potentially hazardous situation that might result in death or serious inj...7This symbol indicates a potentially hazardous situation that might result in minor or moderate in...7* The statements above are notes for your safety.7If this instruction is not followed, paper might be misfed, originals might be damaged, or data m...7This symbol indicates the prior knowledge or preparations required before operating.7This symbol indicates precautions for operation, or actions to take after misoperation.7This symbol indicates numerical limits, functions that cannot be used together, or conditions in ...7This symbol indicates a reference.7Keys that appear on the machine's panel display.7Keys built into the machine's operation panel.7TABLE OF CONTENTS8Manuals for this Machine 18Machine Types 281. User Tools (System Settings)8Keys for User Tools (System Settings) 38Accessing User Tools (System Settings) 58Exiting from User Tools 68User Tools Menu (System Settings) 88Settings You can Change with the User Tools 108General Features 108Timer Settings 158Tray Paper Settings 178Key Operator Tools 198Manuals for this Machine9Manuals for this Machine9Manuals for this Machine9The following two manuals have been prepared for operating this machine: this manual describing h...9The following two manuals have been prepared for operating this machine: this manual describing h...9System Settings (this manual)9System Settings (this manual)9System Settings (this manual)9Describes how to access the system User Tools to make the machine easier to use.9Describes how to access the system User Tools to make the machine easier to use.9Copy Reference9Copy Reference9Describes the various copying functions from basic copying to more advanced functions such as red...9Describes the various copying functions from basic copying to more advanced functions such as red...9Machine Types10Machine Types10This machine comes in two models which vary in copy speed. To make sure which model you have, see...10This machine comes in two models which vary in copy speed. To make sure which model you have, see...10<TABLE>10<TABLE>10<TABLE BODY>10<TABLE ROW>10Type 110Type 210<TABLE ROW>10Copy Speed1085 copies/minute (A4K, 81/2"¥ 11"K)10105 copies/minute (A4K, 81/2"¥ 11"K)10<TABLE ROW>10Printer Unit10Option10Option101. User Tools (System Settings)111. User Tools (System Settings)11Keys for User Tools (System Settings)11Keys for User Tools (System Settings)11<GRAPHIC>11<GRAPHIC>11<GRAPHIC>11<GRAPHIC>111. Status indicator111. Status indicator111. Status indicator11• The condition of the machine is distinguished by this indicator. By default, this indicator is ...11• The condition of the machine is distinguished by this indicator. By default, this indicator is ...11• The condition of the machine is distinguished by this indicator. By default, this indicator is ...11<TABLE>11<TABLE>11<TABLE HEADING>11<TABLE ROW>11Color11Status11<TABLE BODY>11<TABLE ROW>11Off11Main Power Switch is turned off or ready to make copies11<TABLE ROW>11Flashing green11Scanning originals11<TABLE ROW>11Lit green11Copying (Ready to scan originals)11<TABLE ROW>11Flashing red11Toner has nearly run out11<TABLE ROW>11Lit red11Paper jam or other malfunctions112. Display panel112. Display panel11Shows operation status, error messages, and function menus.11Language Selection11Language Selection11Language Selection11Press to select display language, English or French.11Energy Saver11Energy Saver11Energy Saver11When you press and hold the key, the display disappears and the machine enters Energy Saver mode....11Clear Modes11Clear Modes11Clear Modes11Press to clear any previously entered settings.11Clear11Clear11Clear11Press to clear any previously entered numbers.11#12#12#12Press to enter a value or confirm a setting.128. Number keys128. Number keys12Use to enter the number of copies you wish to make. Also use to enter values for various features.12Counter12Counter12Counter12Press to check the total number of copies made.12User Tools12User Tools12User Tools12Press to access the User Tools menu where you can customize the default settings to your preference.12Accessing User Tools (System Settings)13Accessing User Tools (System Settings)13This section is for the key operators in charge of this machine. With User Tools, you can change ...13This section is for the key operators in charge of this machine. With User Tools, you can change ...13After using User Tools, be sure to exit them to return to Copy mode.13After using User Tools, be sure to exit them to return to Copy mode.13The key selected is highlighted.13The settings are not canceled even if the main power switch or operation switch is turned off or the13For information on Copy User Tools, see the “Copy Reference” manual.13For information on Copy User Tools, see the “Copy Reference” manual.13For information on Copy User Tools, see the “Copy Reference” manual.13A Press the13A Press the13A Press the13The User Tools Main Menu appears.13B Press the13B Press the13The system settings menu appears.13C Select the desired menu and touch the key.14C Select the desired menu and touch the key.14D Change the settings by following the instructions on the panel display. Then press the14D Change the settings by following the instructions on the panel display. Then press the14OK14OK14OK14Cancel14Cancel14Exiting from User Tools14Exiting from User Tools14A After changing the user tools settings, press the14A After changing the user tools settings, press the14A After changing the user tools settings, press the14A After changing the user tools settings, press the14Changing the system settings ends to return to Copy mode.14<GRAPHIC>14To cancel the change of the machine's default settings and return to the copy mode, press the14To cancel the change of the machine's default settings and return to the copy mode, press the14You can also exit from User Tools by pressing the14User Tools Menu (System Settings)16User Tools Menu (System Settings)16<GRAPHIC>16<GRAPHIC>17Settings You can Change with the User Tools18Settings You can Change with the User Tools18Regarding how to access the user tools, see18Regarding how to access the user tools, see18Regarding how to access the user tools, see18General Features18General Features18<TABLE>18<TABLE>18<TABLE>18<TABLE HEADING>18<TABLE ROW>18Menu18Description18<TABLE BODY>18<TABLE ROW>18Function Priority18You can specify the mode that is displayed when the operation switch is turned on or System Reset...18You can specify the mode that is displayed when the operation switch is turned on or System Reset...18Default:18Default:18See “System Reset”18See “System Reset”18<TABLE ROW>18Panel Tone18A tone sounds when a key is pressed. You can turn the tone on or off . You can also select the vo...18A tone sounds when a key is pressed. You can turn the tone on or off . You can also select the vo...18Default:18Default:18<TABLE ROW>18Ready Panel Tone18You can specify whether to sound the tone when the machine becomes ready for copying after Energy...18You can specify whether to sound the tone when the machine becomes ready for copying after Energy...18When the “Panel Tone” is set to OFF, the tone does not sound even if the “Ready Panel Tone” is se...18When the “Panel Tone” is set to OFF, the tone does not sound even if the “Ready Panel Tone” is se...18Default:18<TABLE ROW>18Copy Count Display18You can set the copy counter to show the number of copies in the current job made so far (count u...18You can set the copy counter to show the number of copies in the current job made so far (count u...18Default:18Default:18<TABLE ROW>19System Reset19If no operation is performed for a selected time, the machine will automatically return to initia...19If no operation is performed for a selected time, the machine will automatically return to initia...19This function is called “System Reset”. You can set the time between 10 and 999 seconds.19Default:19Default:19<TABLE ROW>19Energy Saver Timer19The machine enters the Energy Saver mode automatically a certain time after your job is finished....19The machine enters the Energy Saver mode automatically a certain time after your job is finished....19Default:19Default:19<TABLE ROW>19Panel Off Timer19The machine enters to the Panel Off mode automatically after your job is finished, after the sele...19The machine enters to the Panel Off mode automatically after your job is finished, after the sele...19Default:19Default:19See “Auto Off Timer”19See “Auto Off Timer”19<TABLE ROW>19Auto Off Timer19The machine turns itself off automatically to conserve energy a certain time after your job is fi...19The machine turns itself off automatically to conserve energy a certain time after your job is fi...19If you use these three functions (Energy Saver Timer, Panel Off Timer and Auto Off Timer), when y...19If you use these three functions (Energy Saver Timer, Panel Off Timer and Auto Off Timer), when y...19Default:19Default:19Auto Off might not be effective when an error message is displayed.19To return to the Ready condition from Auto Off, the machine requires the same warm-up time as the...19<TABLE ROW>20Auto Tray Switching20If you load paper of the same size in two or more trays, regardless of the paper direction, the m...20If you load paper of the same size in two or more trays, regardless of the paper direction, the m...20<TABLE ROW>21Auto Tray Switching21• If you select [Off].21• If you select21• If you select21• If you select21When paper has run out, “Please load paper” will be displayed, and copying will be interrupted.21Default:21Default:21If you put recycled paper, special paper or translucent paper in paper trays and indicate them in...21See “4.Paper Size”21See “4.Paper Size”21<TABLE ROW>21Copier/Document Server Output Tray21You can specify to which tray copies are delivered.21You can specify to which tray copies are delivered.21You can select from the “Finisher Shift Tray” or “Finisher Proof Tray”.21You can select from the “Finisher Shift Tray” or “Finisher Proof Tray”.21When using the staple function, this setting is ignored.21<TABLE ROW>21Status Indicator21The condition of the machine is distinguished by the light called Status Indicator. You can speci...21The condition of the machine is distinguished by the light called Status Indicator. You can speci...21Default:21Default:21<TABLE ROW>21Language Priority21This machine has two language displays. You can select the language to be displayed first.21This machine has two language displays. You can select the language to be displayed first.21Default: English (default)21Default: English (default)21<TABLE ROW>21Screen Colour Setting21You can select the panel display color from four options: Blue & Green Type, Blue & Purple Type, ...21You can select the panel display color from four options: Blue & Green Type, Blue & Purple Type, ...21Default:21Default:21<TABLE ROW>22Paper Tray Priority22You can select the paper tray which will be selected as a default in the following conditions:22You can select the paper tray which will be selected as a default in the following conditions:22Default:22Default:22<TABLE ROW>22Original: F/F4 Size Setting22Currently three types of F size are available; 81/2" ¥ 13", 81/ 4" ¥ 13" and 8" ¥ 13".22Currently three types of F size are available; 822The document feeder or platen cover sensor cannot distinguish these 3 types of originals. This fu...22Default:22Default:22Timer Settings23Timer Settings23When entering Timer Setting mode, if a key operator code has already been set, you must enter the...23When entering Timer Setting mode, if a key operator code has already been set, you must enter the...23See “Key Operator Access”23See “Key Operator Access”23<TABLE>23<TABLE>23<TABLE HEADING>23<TABLE ROW>23Menu23Description23<TABLE BODY>23<TABLE ROW>23Date23Date23Set the date for the machine's internal clock.23Set the date for the machine's internal clock.23If the main power switch has been turned off for more than 20 days, the settings for the Year, Mo...23If the main power switch has been turned off for more than 20 days, the settings for the Year, Mo...23You need to set this for the Weekly Timer to work properly.23According to the Year, Month and Day you set, Date Stamp is set. See “Date Stamp” in the Copy Ref...23<TABLE ROW>23Time23Time23Set the time for the machine's internal clock.23Set the time for the machine's internal clock.23If the main power switch has been turned off for more than 20 days, the settings for the Time may...23If the main power switch has been turned off for more than 20 days, the settings for the Time may...23Enter times using the 24-hour clock (1 minute steps).23You need to set this for the Weekly Timer, Stamp, Document Server, and Job preset functions to wo...23<TABLE ROW>23Weekly Timer: Monday23Weekly Timer: Monday23Weekly Timer: Tuesday23Weekly Timer: Wednesday23Weekly Timer: Thursday23Weekly Timer: Friday23Weekly Timer: Saturday23Weekly Timer: Sunday23Set the times when you want the machine to turn itself on/ off for each day of the week.23Set the times when you want the machine to turn itself on/ off for each day of the week.23The timers do not work if the main power switch is turned off or the power cord is unplugged.23The timers do not work if the main power switch is turned off or the power cord is unplugged.23To keep the power on throughout the day, set both the “On” and “Off” timers to zero.23Enter times using the 24-hour clock (1 minute steps).23Enter times using the 24-hour clock (1 minute steps).23<TABLE ROW>24Key Operator Code For Off Setting24Key Operator Code For Off Setting24Set a key operator code (up to 8 digits) to temporarily cancel the power off setting of the weekl...24Set a key operator code (up to 8 digits) to temporarily cancel the power off setting of the weekl...24When the weekly timers are set and the operation switch is off, you can still use the machine by ...24When the weekly timers are set and the operation switch is off, you can still use the machine by ...24- About weekly timers24- About weekly timers24The weekly timers allow you to restrict the use of the machine to certain times of the day and we...24When the power is turned off by the activation of the weekly timers, you can temporarily cancel t...24When the power is turned off by the activation of the weekly timers, you can temporarily cancel t...24You can specify “On” or “Off” only. For example, you can make the machine turn on Monday morning ...24You cannot turn on or off the main power switch by the weekly timers.24When “On” or “Off” is specified at the same time, “On” becomes effective.24While an error indication is lit, “Off” setting is not effective.24Tray Paper Settings25Tray Paper Settings25<TABLE>25<TABLE>25<TABLE>25<TABLE HEADING>25<TABLE ROW>25Menu25Description25<TABLE BODY>25<TABLE ROW>25Tray1: Paper Type25Tray1: Paper Type25Tray2: Paper Type25Tray3: Paper Type25Tray4: Paper Type25Tray5: Paper Type25Tray6: Paper Type25You can specify the types and size of the copy paper set in the paper tray and make them indicated.25You can specify the types and size of the copy paper set in the paper tray and make them indicated.25You can set with the following steps.25<TABLE ROW>251. Paper Type251. Paper Type25• You can set only 1 type of copy paper in each paper tray.25• You can set only 1 type of copy paper in each paper tray.25• You can set only 1 type of copy paper in each paper tray.25• When specifying, the following indications are displayed.25• When specifying, the following indications are displayed.25“Recycled Paper” when recycled paper is specified.25“Special Paper” when special paper is specified.25“OHP Sheet” when OHP sheet is specified.25“Translucent Paper” when Translucent paper specified.25“Thick Paper” when thick paper is specified.25“Tab Stock” when index tab paper is specified.25• You can set the amount of copy shift on when Tab Stockis set in the tray. The Tab Stock can be ...25• You can set the amount of copy shift on when Tab Stockis set in the tray. The Tab Stock can be ...25• You can specify the “Thick Paper” with “Tab Stock” at the same time. In this case, you cannot p...25• You can specify the “Thick Paper” with “Tab Stock” at the same time. In this case, you cannot p...25• You can specify the “Thick Paper” with “Tab Stock” at the same time. In this case, you cannot p...25Default:25Default:25• You can set “Translucent Paper” and “Tab Stock” only in Tray 4 and Tray 5.25• You can set “Translucent Paper” and “Tab Stock” only in Tray 4 and Tray 5.25• You can set “Translucent Paper” and “Tab Stock” only in Tray 4 and Tray 5.25<TABLE ROW>252. Paper Color252. Paper Color25• When specifying “Special Paper” or “Thick Paper”, you can select the color from the following 1...25• When specifying “Special Paper” or “Thick Paper”, you can select the color from the following 1...25• When specifying “Special Paper” or “Thick Paper”, you can select the color from the following 1...25• 1.None 2.Yellow 3.Green 4.Blue 5.Purple 6.Ivory 7.Orange 8.Pink 9.Red 10.Gray 11.User Colour Pa...25• 1.None 2.Yellow 3.Green 4.Blue 5.Purple 6.Ivory 7.Orange 8.Pink 9.Red 10.Gray 11.User Colour Pa...25Default:25Default:25<TABLE ROW>26Tray1: Paper Type26Tray1: Paper Type26Tray2: Paper Type26Tray3: Paper Type26Tray4: Paper Type26Tray5: Paper Type26Tray6: Paper Type263. Slip Sheet Copy In Duplex Mode263. Slip Sheet Copy In Duplex Mode26• You can specify Duplex Copy or 1 Sided Copy in the specified for slip sheets tray. However, if ...26• You can specify Duplex Copy or 1 Sided Copy in the specified for slip sheets tray. However, if ...26• You can specify Duplex Copy or 1 Sided Copy in the specified for slip sheets tray. However, if ...26Default:26Default:26<TABLE ROW>264. Paper Size264. Paper Size26• If the specified paper size differs from the size of paper actually set in the paper tray, a pa...26• If the specified paper size differs from the size of paper actually set in the paper tray, a pa...26• If the specified paper size differs from the size of paper actually set in the paper tray, a pa...26Default:26Default:26Default:26<TABLE ROW>26Slip Sheet 126Slip Sheet 126Slip Sheet 226Slip Sheet 326Cover Sheet26Separation Sheet26You can specify any tray as a Slip Sheet 1, 2, 3, Cover Sheet, or Separation Sheet.26You can specify any tray as a Slip Sheet 1, 2, 3, Cover Sheet, or Separation Sheet.26Default:26Default:26Key Operator Tools27Key Operator Tools27When entering Key Operator Tools, if a key operator code has already been set, you must enter the...27When entering Key Operator Tools, if a key operator code has already been set, you must enter the...27<TABLE>27<TABLE>27<TABLE HEADING>27<TABLE ROW>27Menu27Description27<TABLE BODY>27<TABLE ROW>27User Codes: Copier/ Document Server27User Codes: Copier/ Document Server27You can specify whether to control User Codes. This setting is also valid for the copy server.27You can specify whether to control User Codes. This setting is also valid for the copy server.27Default:27Default:27For Registering a User Code, see “User Tools (Copy Features)”, “Key Operator Tools” of the “Copy ...27For Registering a User Code, see “User Tools (Copy Features)”, “Key Operator Tools” of the “Copy ...27<TABLE ROW>27Key Counter: Copier Access27You can specify whether to control Key Counter. This setting is also valid for the copy server.27You can specify whether to control Key Counter. This setting is also valid for the copy server.27Regarding key counter availability and usage, please ask your service representative.27Regarding key counter availability and usage, please ask your service representative.27Default:27See “User Tools (Copy Features)”, “Key Operator Tools” in the “Copy Reference” manual.27See “User Tools (Copy Features)”, “Key Operator Tools” in the “Copy Reference” manual.27<TABLE ROW>28Key Operator Access28You can specify whether to control the machine by the Key Operator Access code (the password to o...28You can specify whether to control the machine by the Key Operator Access code (the password to o...28A Choose “Off” or “On”.28A Choose “Off” or “On”.28A Choose “Off” or “On”.28B When you choose “On”, enter the Key Operator Access code (up to 8 digits) from the Number keys,...28B When you choose “On”, enter the Key Operator Access code (up to 8 digits) from the Number keys,...28C Press the28C Press the28Default:28Default:28<TABLE ROW>28User Code Display28You can specify whether to display user codes entered.28<TABLE ROW>29AOF (Keep It On.)29For details, contact your service representative.29For details, contact your service representative.29For details, contact your service representative.29<TABLE ROW>29Memory Allocation29You can select the hard disk memory allocation priority from two options.29You can select the hard disk memory allocation priority from two options.29Default:29Default:29<TABLE ROW>29Display/Print Counter29You can have various counters displayed or printed.29You can have various counters displayed or printed.29INDEX30A30C30D30E30F30K30L30M30O30P30R30S30T30U30W30Dimensioni: 821 KBPagine: 30Language: EnglishApri il manuale
