Manuali utente per Sears Craftsman 247.77055

Sommario

• NOTE: For repairs beyond the minor adjustments listed above, please contact your local Sears Service Center.

  18
• NOTE: Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage.

  17
• NOTE: If storing in an unventilated or metal storage shed, be certain to rustproof the equipment by coating with a light oil or silicone.

  17
  • Figure 1

    6
• NOTE: Reference to right and left hand side of the Yard Vacuum is observed from the operating position. See Figure 1.

  6
  • Figure 2

    6
  • Figure 3

    7
  • Figure 4

    7
  • Figure 5

    7
• NOTE: The bag/chute switch button attached to the mounting bracket must be fully depressed by the tip of front tab on bag handle when securing the bag or engine will not start.

  7
• NOTE: The bag/chute switch button attached to the mounting bracket must be fully depressed by the tip of front tab on the blower chute or engine will not start.

  8
  • Figure 6

    8
  • Figure 7

    9
• NOTE: Although multi-viscosity oils (5W30, 10W30, etc.) improve starting in cold weather, they will result in increased oil cons...

  10
  • Figure 8

    11
  • Figure 9

    11
  • Figure 10

    11
  • Figure 11

    12
• NOTE: In general, raise the nozzle height to vacuum a thick layer of leaves or to operate with the blower chute and lower the nozzle height for smoother surfaces.

  12
  • Figure 12

    12
• NOTE: Cleaning with a forceful spray of water is not recommended as it could contaminate the fuel system.

  13
• NOTE: If the foam filter is torn or damaged in any way, replace it.

  14
• NOTE: Do not sandblast spark plug. Spark plug should be cleaned by scraping or wire brushing and washing with a commercial solvent.

  14
  • Figure 13

    14
• NOTE: In general, raise the nozzle height to vacuum a thick layer of leaves or to operate with the blower chute and lower the nozzle height for smoother surfaces.

  15
  • Figure 14

    15
  • Figure 15

    15
  • Figure 16

    15
• NOTE: When tipping the unit, empty the fuel tank and keep engine spark plug side up.

  16
  • Figure 17

    16
  • Figure 18

    16
  • Figure 19

    16
• NOTE: Make certain chipper blade is reassembled with the sharp edge facing upward. See Figure 20.

  16
  • Figure 20

    16