Manuale UtenteSommarioImportant safety instructions21 Installations must be performed by a qulified or licensed contractor, plumber or gas fitter qualified or licensed by the state, province or region where this appliance is being installed.22 Shut-off valve must be “T” handle gas cock.23 Flexible gas connector must not be longer than 36”.21 To contact a qualified electrician to install the appliance32 To ensure that the electrical system is adequate and in conformance with the national ANSI/NFPA 70 ELECTRICAL CODE - LATEST ED...32. DIMENSIONAL REQUIREMENTS41 24” (61 cm) min. when bottom of wood or metal cabinet is protected by not less than ¹ “ (0.64 cm) flame retard millboard cover...42 13” (33 cm) max. upper cabinet depth;43 35- º “ (90 cm) min. cabinet opening widht;44 18” (45.7 cm) upper cabinet to countertop;45 2” (5 cm) min. clearance from the sides of range to side wall or other combustible material;46 Junction box.42.1 Product dimension53. UNPACKING, MOVING AND PLACING THE RANGE64. WALL FIXING AND ANTI-TIP DEVICE74.1 Tools needed for installation of Anti-Tip Device:74.2 Instruction for wall fixing71 Fix the screw to the wall and hook the chain (Fig. A);72 Hook the chain to the hole positioned at the rear of the cooker (Fig. B - Part. A);73 Once the chain is in position, push the cooker against the wall;74 The height of the screw hole from floor level must not exceed 315” - 800 mm (Fig. C).74.3 Mounting the rear top upstand81 Position the upstand above the top, taking care to align holes A with holes B.82 Secure the upstand to the top by tightening screws C.85. Electrical connection95.1 US installation only / 3-wire branch circuit105.2 US installation and canadian installation / 4-wire branch circuit11Dimensioni: 407 KBPagine: 11Language: EnglishApri il manuale