Manuali utente per Studer Innotec C2324 COMPACT

Sommario

• GENERAL INFORMATION

  4
• OPERATING INSTRUCTIONS

  4
• QUALITY AND WARRANTY

  4
• WARRANTY DISCLAIMER

  4
• LIABILITY DISCLAIMER

  4
• PRECAUTIONS

  4
• SPECIAL PRECAUTIONS

  5
• INTRODUCTION

  6
• PRINCIPE SCHEMATIC

  6
• 2.2 DESCRIPTION OF MAIN FUNCTIONS

  6
• 2.2.1 The Inverter

  6
• 2.2.2 The Transfer system

  6
• 2.2.3 The Battery charger

  6
• 2.2.4 The solar charge regulator (optional)

  7
• 2.2.5 Remote control

  7
• 2.3 BATTERY CONNECTIONS

  7
• 2.3.1 Parallel Connection

  7
• 2.3.2 Series Connection

  7
• 2.3.3 Parallel- Series Connection

  8
• ASSEMBLY

  8
• 3.1 PLACE OF ASSEMBLY

  8
• 3.2 FIXING

  8
• 3.2.1 Compact

  8
• 3.2.2 Protection cover IP23

  8
• 3.3 CONNECTION

  8
• 3.3.1 General instructions on connecting

  8
• 3.3.2 Protection cover for the terminals connections

  9
• 3.4 CONNECTING PLAN / FRONT SIDE

  9
• 3.5 CABLING/WIRING

  10
• 3.5.1 Pre-installation settings

  10
• 3.5.2 Connection to battery

  10
• 3.5.3 Connection the 230Vac-Consumer Device (AC OUTPUT)

  10
• 3.5.4 Connection the 230Vac Input (AC INPUT)

  10
• 3.5.5 Connect the Solarmodules: SOLAR +/- (Only for solar option)

  11
• 3.5.6 Connection to Auxiliary Contact

  11
• 3.5.7 Connection to Remote control

  11
• 3.5.8 Connection to Temperature Sensor (Temp.)

  11
• OPERATING

  12
• 4.2 LIGHT EMITTING DIODES

  12
• 4.3 PUSH BUTTONS

  13
• 4.4 TURNING KNOBS

  13
• 4.5 THE INVERTER

  14
• 4.5.1 Charge detection system „Standby“

  14
• 4.5.2 Overload

  14
• 4.5.3 Overheating (Over Temp)

  14
• 4.5.4 Battery Condition

  14
• 4.6 THE BATTERY CHARGER

  15
• 4.6.1 Cycle of charge

  15
• 4.6.2 Equalization charging

  15
• 4.6.3 Input current repartition (Power sharing)

  15
• 4.6.4 Charging current

  16
• 4.6.5 Battery Condition

  16
• 4.7 THE TRANSFER SYSTEM

  16
• 4.7.1 Set the transfer voltage threshold

  17
• 4.7.2 FAST (UPS)- MODE for the Transfer Switch

  17
• 4.7.3 Delayed mode of the Transfer System

  17
• 4.8 THE SOLAR CHARGE REGULATOR (OPTION)

  17
• 4.9 THE MULTIFUNCTIONAL CONTACT

  17
• 4.10 THE REMOTE CONTROL

  18
• 4.11 THE TEMPERATURE SENSOR

  19
• PROGRAMMING

  19
• 5.1 STANDARD SETTING

  19
• 5.1.1 Working mode

  19
• 5.1.2 Battery voltage

  19
• 5.1.3 Auxiliary contact

  19
• 5.2 RESET VALUE

  19
• 5.3 BATTERY VOLTAGES AND ABSORPTION TIME

  19
• 5.3.1 Table of voltage and timing threshold

  19
• 5.3.2 Set the voltage and timing threshold

  20
• 5.4 PROGRAM THE AUXILIARY CONTACT

  20
• 5.4.1 Principle

  20
• 5.4.2 The programming of the Auxiliary Contact is carried out in the following Steps

  20
• 5.4.3 Example

  21
• 5.4.4 Manual operating of Auxiliary Contact

  21
• 5.5 DISABLING SOME OF THE COMPACT FUNCTIONS

  21
• 5.5.1 Diagram of the different mode

  22
• MAINTENANCE

  22
• EC COMPLIANCE

  22
• TECHNICAL DATA

  23