Manuali utente per Thermaltake WSPR0017

Sommario

• 1. General

  4
• 2. AC Input Characteristics

  4
  • 2.1 AC Input Voltage, Frequency and Current (Rating: 100V-240Vac, 47-63Hz, 8-4A)

    4
  • 2.2 AC Inrush Current

    4
  • 2.3 Input Power Factor Correction (Active PFC)

    4
  • 2.4 Input Current Harmonics

    4
  • 2.5 AC Line Dropout

    4
  • 2.6 AC Line Slow Transients

    4
  • 2.7 AC Surge Voltages

    5
  • 2.8 Surge Immunity, IEC61000-4-5

    5
  • 2.9 Electrical Fast Transient / Burst, IEC61000-4-4

    5
  • 2.10 Electrical Discharge, IEC61000-4-2

    5
  • 2.11 Radiated Immunity, IEC61000-4-3

    6
• 3. DC Output Specification

  6
  • 3.1 Output Current / Loading

    6
    • Table 5 – Load Range 1:

      6
    • Table 5 – Load Range 1

      6
  • 3.2 DC Voltage Regulation, Ripple and Noise

    6
    • Table 7 – Regulation, ripple and noise

      6
  • 3.3 Dynamic Loading

    7
    • Step Load

      7
  • 3.4 Capacitive Loading

    7
    • Output

      7
    • MIN

      7
    • MAX

      7
  • 3.5 Timing Requirements

    7
    • Item

      8
    • MIN

      8
    • MAX

      8
    • Item

      8
    • MIN

      8
    • MAX

      8
  • 3.6 Power Good Signal: PWOK

    9
    • Open collector/drain output from power supply. Pull-up to VSB located in power supply.

      9
  • 3.7 Remote On/Off Control: PSON#

    10
    • Accepts an open collector/drain input from the system. Pull-up to VSB located in power supply.

      10
  • 3.8 Overshoot at Turn-on /Turn-off

    10
  • 3.9 Efficiency

    10
  • 3.10 +5VSB (Standby)

    10
• 4. Protection

  10
  • 4.1 Over Current Protection

    10
  • 4.2 Over Voltage Protection

    11
  • 4.3 Short Circuit Protection

    11
  • 4.4 No Load Operation

    11
• 5. Environmental Requirements

  11
  • 5.1 Temperature

    11
  • 5.2 Humidity

    11
  • 5.3 Altitude

    11
  • 5.4 Mechanical Shock

    11
  • 5.5 Vibration (Operating and Non-operating)

    12
  • 5.6 Acoustic Noise

    12
• 6. Agency Requirements

  12
  • 6.1 Safety Certification.

    12
  • 6.2 Input Leakage Current

    12
  • 6.3 Production Line Testing

    12
  • 6.4 Hi-Pot Testing

    13
  • 6.5 Ground Continuity Testing

    13
• 7. Redundant Power Supply Function:

  13
  • 7.1 Redundancy

    13
  • 7.2 Hot Swap Requirements

    13
  • 7.3 LED Indicators

    13
• 8. Reliability

  14
  • 8.1 Mean Time Between failures (MTBF)

    14
  • 8.2 Warranty

    14
• 9. Connections

  14
  • 9.1 AC Input Connector

    14
  • 9.2 DC Wire Harness and Connector Requirements

    14
    • P1: ATX Motherboard Power Connector

      14
    • P2: Processor Power Connector

      15
    • 4-Pin HDD / CD-ROM Drive Power Connectors

      15
    • Small 4-Pin: Floppy Disk Drive Power Connectors

      15
• 10. Physical Characteristics Size

  15
  • 10.1 Weight: 4.0Kg

    15
  • 10.2 Dimension: 102.2mm(W) x 84.2mm(H) x 300.0mm(D)

    15
  • 10.3 Mounting Requirements: See attachment

    15