Manuali utente per Tyan Computer B2881

Sommario

• Chapter 1: Overview

  9
  • 1.1 About the Transport GT24 B2881

    9
  • 1.2 Product Models

    10
  • 1.3 Features

    11
  • 1.4 Unpacking

    13
    • 1 x Tyan driver CD

      13
    • Mainboard Manual

      14
  • 1.5 About the Product

    16
    • 1.5.1 System Front View

      16
      • CD-ROM Drive

        16
      • (Option)

        16
      • CD-ROM Drive

        16
    • 1.5.2 System Rear View

      17
      • Power Supply Socket

        17
    • 1.5.3 LED Definition

      17
    • 1.5.4 System Internal View

      19
    • 1.5.5 Motherboard Layout

      22
    • 1.5.6 Motherboard Block Diagram

      24
      • CD-ROM Accessory Kit

        15
      • (for B2881G24S4-LC only)

        15
• Memory Slots

  36
• CPU Sockets

  34
• Chapter 2: Setting Up

  9
  • 2.0.1 Before You Begin

    25
  • 2.0.2 Work Area

    25
  • 2.0.3 Tools

    25
  • 2.0.4 Precautions

    26
  • 2.1 Rack Mounting

    27
    • 2.1.1 Installing the Server in a Rack

      27
      • 1. Screw the mounting ear to each side of Transport GT24 as shown using 2 screws from the supplied screws kit.

        28
      • 2. Draw out the inner rails from rail assembly. Install inner rails to left and right sides of chassis using 2 M4-5L(D) screws for each side.

        28
      • 3. Measure the distance between inner side of the front and rear mounting brackets in the rack.

        28
      • 4. Locate the front and rear brackets.

        29
      • 5. Reserve 90mm for GT20 or 40mm for GT24 on the front bracket. Secure the front bracket to outer rail with 2 M4- 4L(C) screws.

        29
      • 6. Reserve the distance same as in Step 2 on rear bracket. Secure the rear bracket to outer rail with 2 M4-4L(C) screws.

        30
      • 7. Secure the outer rail to the rack using 2 brackets and 4 M4-8L(E) screws for each side (A). Secure the mounting brackets from inside, not outside, of the rack (B).

        30
      • 8. Draw out the middle rail to the latch position.

        31
      • 9. Lift the chassis and then insert the inner slide rails into the middle rails.

        31
      • 10. Push the chassis in and press the latch key (A). Then push the whole system into the rack (B).

        31
      • 11. Secure the mounting ears of chassis to the rack with 2 M4-15L(F) screws.

        32
  • 2.2 Installing Motherboard Components

    33
    • 2.2.1 Removing the Chassis Cover

      33
      • 1. Release the screw on the back side. Then slide the chassis cover in the direction of arrow.

        33
      • 2. Lift the cover off.

        33
    • 2.2.2 Installing the CPU, Heatsink and Air Duct

      34
      • 1. After removing the pre-installed air duct, locate the CPU sockets.

        34
      • 2. Pull the CPU lever up to unlock the CPU socket.

        34
      • 3. Place the CPU in the CPU socket, ensuring that pin 1 is located as shown in the following illustration.

        34
      • 4. Press the CPU socket lever down in the direction shown to secure the CPU.

        35
      • 5. Align the heatsink screw holes with the holes on the motherboard and insert two heatsink screws as shown.

        35
      • 6. Replace the air duct over the heatsink and secure the heatsink with two screws.

        35
    • 2.2.3 Installing the Memory

      36
      • 1. Locate the memory slots on the motherboard.

        36
      • 2. Press the memory slot locking levers in the direction of the arrows as shown in the following illustration.

        36
      • 3. Align the memory module with the slot. The module has indentations that align with notches in the slots.

        36
      • 4. Insert the memory module into the slot as shown.

        37
    • 2.2.4 Installing a PCI-X Card

      37
      • 1. Push the tab of PCI-X slot on the rear panel in the direction as shown to release the bracket.

        37
      • 2. Move the bracket to left as shown.

        38
      • 3. Insert the PCI-X card as shown.

        38
      • 4. Push the tab of PCI-X slot in the direction as shown to fix PCI-X card.

        38
  • 2.3 Installing the Hard Drive for B2881G24S4-LC

    39
    • 1. Remove the screw to release the hard drive tray.

      39
    • 2. Slide the drive tray out.

      39
    • 3. Place a hard drive into the drive tray and then secure the hard drive using 4 screws.

      39
    • 4. Insert the hard drive tray into the bay.

      40
    • 5. Secure the HDD using a screw.

      40
    • 6. Connect the data and power cables.

      40
  • 2.4 Installing the Hard Drive for B2881G24S4H/U4H

    41
    • 1. Press the locking lever latch in the direction of arrow (A) and then pull the locking lever open (B).

      41
    • 2. Slide the drive tray out.

      41
    • 3. Place a hard drive into the drive tray.

      41
    • 4. Using 4 HDD screws to secure the HDD.

      42
    • 5. Reinsert the drive tray into the chassis (A), ensuring that the drive tray is completely inserted into the chassis (B).

      42
    • 6. Pressing the locking lever to secure the hard drive tray.

      42
  • 2.5 Installing the Slim FDD (Option)

    43
    • 1. Locate the two FDD rails and screws from the FDD kit. Secure the two rails to FDD using four screws.

      43
    • 2. Connect the FDD backplane to FDD using 2 screws.

      43
    • 3. Connect the FFC cable to FDD.

      43
    • 4. Using a screw driver to pull open the door of FDD tray.

      43
    • 5. Insert FDD module into the tray.

      44
    • 6. Locate the FDD cable from FDD kit. Connect the wrinkle side to the connector on floppy slot. Refer to the picture below for the correct direction. Then, connect the power cable of FDD to the connector on floppy slot.

      44
    • 7. Connect the other side to the connector on motherboard.

      44
  • 2.6 Installing the CD-ROM or DVD-ROM (for B2881G24S4-LC only)

    45
    • 1. Use a screw driver to pull open the door of CD-ROM drive bay.

      45
    • 2. Before connecting the CD-ROM backplane to CD_ROM drive, first connect the two white buffers to the backplane with 2 screws (A). Then, secure the CD-ROM backplane to CD-ROM drive with 2 screws provided (B).

      45
    • 3. Insert the CD-ROM drive into the chassis

      46
    • 4. Connect the CD-ROM power and data cables.

      46
• Chapter 3: Replacing Pre-Installed Components

  9
  • 3.1 Introduction

    47
    • 3.1.1 Work Area

      47
    • 3.1.2 Tools

      47
    • 3.1.3 Precautions

      48
  • 3.2 Disassembly Flowchart

    49
  • 3.3 Removing the Cover

    50
    • 1. Release the screw and then slide the cover in the direction of arrow.

      50
    • 2. Lift the cover in the direction of arrow (A).

      50
  • 3.4 Replacing Motherboard Components

    51
    • 3.4.1 Disconnecting All Motherboard Cables

      51
      • 1. Disconnect ATX power cables

        51
      • 2. Disconnect CD-ROM drive cable and SATA (or SCSI) hard drive cables.

        51
      • 3. Disconnect the front panel, USB, and two LAN connectors. Refer to the mainboard layout for the locations.

        51
      • 4. Disconnect all fan power cables.

        52
    • 3.4.2 Removing the Motherboard

      53
      • 1. Remove the eleven screws securing the motherboard to the chassis.

        53
      • 2. Remove the motherboard.

        53
  • 3.5 Replacing the LED Control Board

    54
    • 1. Remove the 2 screws securing the LED control board to the chassis.

      54
    • 2. Pull the LED control board free from the chassis as shown below.

      54
    • 3. Unplug the front panel ribbon cable from the connector.

      54
    • 4. Unplug the USB cable from the connector.

      55
    • 5. Remove the three screws securing the LED control board to the bracket

      55
    • 6. Release the LED control board from the chassis. After replacement, insert and secure the unit to the chassis following the reverse procedures from step 1~5.

      55
  • 3.6 Replacing the M1012 Adapter Board

    56
    • 1. Remove all the cables connected to the adapter board, including front panel, USB, LAN, power and five fan cables.

      56
    • 2. Remove the five screws to release the adapter board. Refer to page 49 for the location.

      56
    • 3.6.1 M1012 Adapter Board Features

      57
    • 3.6.2 M1012 Adapter Board Connector Pin Definition

      58
    • 3.6.3 System Fan Layout

      63
  • 3.7 Replacing the SATA or SCSI Backplane

    65
    • 1. Remove the 3 screws securing the adapter board to the chassis.

      65
    • 2. Grab the two lables to lift the adapter board.

      65
    • 3. Remove the ten screws that secure the bracket to the adapter board.

      66
    • 4. Release the adapter board free from the bracket.

      66
    • 5. Replace the unit to the chassis following the reverse procedures from step 1 to 4 after done.

      66
    • 3.7.1 S-ATA Backplane (M1204) Features

      67
    • 3.7.2 SCSI Backplane (M1205) Features

      70
  • 3.8 Replacing the Power Supply

    74
    • 1. Remove the two screws that secure the power supply to the chassis.

      74
    • 2. Remove the screw that secure the fan assembly to the chassis

      74
• Appendix I: BIOS Differences

  75
  • Appendix II: Cable Connection Tables

    77
    • Table 1: B2881G24S4-LC Model

      77
    • Table 2: System Fan to M1012 Adapter Board

      77
    • Table 3: M1012 Adapter Board to Motherboard

      77
    • Table 4: Power Supply to Motherboard

      78
    • Table 5: Power Supply to M1012 Adapter Board

      78
    • Table 6: M1012 Adapter Board to Motherboard

      78
    • Table 7: M1003 Front Panel Control Board Related Cable

      78
    • Table 8: Chassis Intrusion Cable

      78
    • Table 9: FDD Related Cable (Option)

      79
    • Table 10: CD-ROM Related Cable (Option)

      79
  • Technical Support

    80