Manuali utente per Zebra Technologies radio frequency identification (rfid)

Sommario

• Contents

  3
• About This Document

  7
  • Who Should Use This Document

    8
  • How This Document Is Organized

    8
  • Contacts

    10
  • Document Conventions

    11
• Introduction to RFID

  13
  • RFID Overview

    14
  • RFID Label Selection

    14
    • Considering RFID Transponder (Tag) Types

      14
    • Accounting for Transponder Inlay Placement

      15
    • Selecting and Purchasing RFID Labels

      15
    • Performing Label Placement Tests

      15
    • Storing RFID Labels

      15
  • Radio Frequency Interference

    16
  • ZPL Commands for RFID Applications

    16
  • SGD Commands for RFID Applications

    16
• RFID Printer Setup and Operation

  17
  • Set Tag Type

    18
  • Set RF Power Levels

    18
  • Perform RFID Transponder Calibration

    18
  • Download Latest Firmware

    19
• RFID Control Panel Parameters

  21
• Creating Basic RFID Label Formats

  29
  • Create and Send an RFID Label Format

    30
  • Sample RFID Label Formats

    31
    • RFID Label Format 1—Encode a Gen 2 Tag in Hexadecimal

      31
    • RFID Label Format 2—Encode a Gen 2 Tag in ASCII

      32
    • RFID Label Format 3—Read Data from Tag and Print Data on Label

      33
    • RFID Label Format 4—Encode Tag, Read Tag, and Print Data on Label

      34
    • RFID Label Format 5—Encode a Class 1 64-bit Tag in Hexadecimal

      36
    • RFID Label Format 6—Encode Tag, Read Tag, and Return Results to Host

      37
• RFID Antenna Location

  39
  • RXi and RXi HF

    40
  • RZ400 and RZ600

    40
  • R110PAX4

    41
  • RP4T

    41
  • R4Mplus

    42
• Transponder Characteristics

  43
  • Basic Transponder Characteristics

    44
  • Electronic Product Code (EPC)

    45
    • EPC Fields

      45
    • EPC Structure in RFID Labels

      45
  • EPC Class 1, Generation 2 (Gen 2)

    46
    • Data Content

      46
    • Data and Tag Security

      46
    • Gen 2 Memory Map

      46
• Troubleshooting

  49
  • RFID Problems

    50
  • RFID Error Codes and Messages

    53
    • Error and Status Messages

      53
    • Error Codes

      66
• ZPL II Commands for RFID

  79
  • ZPL Overview

    81
  • Printer and Firmware Compatibility

    82
  • ^HL or ~HL

    84
  • ^HR

    85
    • Calibrate RFID Transponder Position

      85
  • ^HV

    88
    • Host Verification

      88
  • ^MM

    89
    • Print Mode

      89
  • ^RA

    91
    • Read AFI or DSFID Byte

      91
  • ^RB

    93
    • Define EPC Data Structure

      93
  • ^RE

    95
    • Enable/Disable E.A.S. Bit

      95
  • ^RF

    96
    • Read or Write RFID Format

      96
  • ^RI

    100
    • Get RFID Tag ID

      100
  • ^RM

    101
    • Enable RFID Motion

      101
  • ^RN

    102
    • Detect Multiple RFID Tags in Encoding Field

      102
  • ~RO

    103
    • Reset Advanced Counters

      103
  • ^RQ

    105
    • Quick Write EPC Data and Passwords

      105
  • ^RR

    107
    • Specify RFID Retries for a Block

      107
  • ^RS

    108
    • Set Up RFID Parameters

      108
  • ^RT

    115
    • Read RFID Tag

      115
  • ~RV

    117
    • Report RFID Encoding Results

      117
  • ^RW

    118
    • Set RF Power Levels for Read and Write

      118
  • ^RZ

    120
    • Set RFID Tag Password and Lock Tag

      120
  • ^WF

    123
    • Encode AFI or DSFID Byte

      123
  • ^WT

    125
    • Write (Encode) RFID Tag

      125
  • ^WV

    127
    • Verify RFID Encoding Operation

      127
• SGD Commands for RFID

  129
  • Printer and Firmware Compatibility

    130
  • odometer.rfid.valid_resettable

    132
  • odometer.rfid.void_resettable

    133
  • rfid.error.response

    134
  • rfid.position.program

    135
  • rfid.reader_1.antenna_port

    136
  • rfid.reader_1.power.read

    137
  • rfid.reader_1.power.single_power

    138
  • rfid.reader_1.power.write

    139
  • rfid.tag.calibrate

    141
  • rfid.tag.data

    142
  • rfid.tag.test

    143
  • rfid.tag.type

    144
• RFID Applicator Signals

  147
  • Timing Diagrams for RFID

    148
    • Single Signal Mode

      148
    • Double Signal Mode

      150
  • Applicator Interface Connector Pin Configuration

    151
    • Jumper Configurations and Pinouts for +5 V I/O Operation

      154
    • Pinouts for +24-28 V I/O Operation

      155
• Index

  157