Precor 5.31 ユーザーズマニュアル
Owner’s Manual: Heart Rate Features
17
Table 1 shows the percents used in calculating the heart rate
target zones. While your heart rate remains within these
zones, the corresponding light blinks and provide a visual cue.
target zones. While your heart rate remains within these
zones, the corresponding light blinks and provide a visual cue.
The calculation used to determine your maximum aerobic heart
rate is (220 minus your age). When you multiply it by the
percent indicated in Table 1, you can understand the relation-
ship between the pulsating LED and your target heart rate.
rate is (220 minus your age). When you multiply it by the
percent indicated in Table 1, you can understand the relation-
ship between the pulsating LED and your target heart rate.
CAUTION: Your heart rate should never exceed 85% of
your maximum aerobic heart rate or go above PEAK. If it
does, immediately reduce your strides per minute, adjust
the CrossRamp, or resistance to return your heart rate to
your physician-recommended target zone.
your maximum aerobic heart rate or go above PEAK. If it
does, immediately reduce your strides per minute, adjust
the CrossRamp, or resistance to return your heart rate to
your physician-recommended target zone.
Table 1. Heart rate target zones and SmartRate LEDs
The SmartRate indicator lights do not appear when:
•
You press QUICKSTART at the banner.
•
You do not enter your age before starting a program.
•
You do not wear or improperly position the chest strap.
•
You fail to grasp both touch-sensitive handrail grips on
the EFX5.35 or EFX5.33, for five to ten seconds.
the EFX5.35 or EFX5.33, for five to ten seconds.
Heart Rate Zone
Percent
Percent
LED Blinking
Label
Above 87
Seventh
HIGH
85 to 87
Sixth
PEAK
78 to 84
Fifth
CARDIO
70 to 77
Fourth
CARDIO
62 to 69
Third
FATBURN
55 to 61
Second
FATBURN
Below 55
First
WARMUP