Precor 5.31 ユーザーズマニュアル

49

Through a specific set of number key presses, you can 
customize the pause or cool down times. 

To access the menu and change the settings, perform the 
following steps:

1. At the Precor banner, press the following keys in 

sequence without pausing between selections:

RESET, 5, 6, 7, 1

Numbers appear on the display as you press the 
associated key.

DIAGS - SET PARAMETERS appears briefly, and then 
SELECT UNITS scrolls across the display.

The EFX can display measurements in either metric or U.S. 
standard. The default factory setting is set to display U.S. 
standard. To change this setting, perform the following steps:

2. At the SELECT UNITS prompt, press OK. Use the 

navigational arrow keys to select a unit of measure (either 
METRIC or U.S.).

3. When you are ready, press OK to accept the displayed 

setting and move to the next program. Or, press RESET 
to cancel any changes and return to the Precor banner.

You can limit how long a user can pause while exercising on 
the unit by entering a time between 1 and 10 minutes. For 
example, if you set the pause time limit to 60 seconds, the 
display automatically resets to the Precor banner if no key 
press occurs within one minute. 

4. At the SET MAX PAUSE TIME prompt, press OK. Use 

the navigational arrow keys to change the time limit. 
Choose between 1 and 10 minutes. The default time is 
10 minutes.

5. When you are ready, press OK to accept the displayed 

setting and move to the next program. Or, press RESET 
to cancel any changes and return to the Precor banner.