Pioneer VSX-39TX ユーザーズマニュアル
24
Display
All the display information is explained and/or referenced here.
DIGITAL
dB
PRO LOGIC
STEREO
DSP
MIDNIGHT
LOUDNESS
ATT
SIGNAL
SELECT OVER
H.P
AC-3 DTS
ANALOG SP
AB
MONO STEREO
TUNED AMFM
TUNED AMFM
L
C
R
LFE
LS
S
RS
DIGITAL
AC-3RF
AUTO
TAPE 2
VOLUME
1
2 3 4 5
6
7
8
9
10
11
13
14
15
12
Displays & Controls
OVER – When the source signal is analog, this
lights if the signal is in danger of distorting.
Press INPUT ATT on the front panel to lower
the signal level.
lights if the signal is in danger of distorting.
Press INPUT ATT on the front panel to lower
the signal level.
ATT – Lights when INPUT ATT is used to
reduce the level of the analog source signal.
reduce the level of the analog source signal.
4 Speaker indicators
Light to indicate the current speaker system, A
and/or B.
and/or B.
5 LOUDNESS indicator (See p.51)
Lights when the LOUDNESS mode is on.
6 H.P (headphones)
Lights when headphones are connected to the
PHONES jack (speakers systems A and B both
turn off automatically).
PHONES jack (speakers systems A and B both
turn off automatically).
7 MIDNIGHT indicator (See p.50)
Lights when the MIDNIGHT LISTENING mode
is on.
is on.
8 DSP indicator (See p.43-47, 49)
Light when a DSP or Advanced Theater modes
are selected.
are selected.
9 STEREO indicator
Lights when a STEREO modes are selected.
10 Radio Frequency/Function indicator
Displays the function or the frequency of the
current radio station.
current radio station.
1 SIGNAL SELECT indicators
Light to indicate the input signal you selected.
ANALOG : Lights when analog signals are
assigned.
DIGITAL : Lights when digital audio signals are
selected.
AC-3 RF : Lights when AC-3 RF signals are
assigned.
AUTO : Lights when the receiver is set to select
the input signal automatically.
assigned.
DIGITAL : Lights when digital audio signals are
selected.
AC-3 RF : Lights when AC-3 RF signals are
assigned.
AUTO : Lights when the receiver is set to select
the input signal automatically.
2 Program Format indicators
AC-3 : Lights when a source with Dolby Digital
signals is played.
DTS : Lights when a source with DTS audio
signals is played.
signals is played.
DTS : Lights when a source with DTS audio
signals is played.
For Dolby Digital or DTS sources : These
indicators change according to which channels
are active in the source. When all three LS (left
surround), S (surround) and RS (right surround)
light at the same time it means a source
indicators change according to which channels
are active in the source. When all three LS (left
surround), S (surround) and RS (right surround)
light at the same time it means a source
with
Surround EX or DTS-ES flag is being used.
L – Left front channel.
C – Center channel.
R – Right front channel.
LS – Left surround channel.
S – Surround channel (mono).
RS – Right surround channel.
LFE – Low Frequency Effects channel.
C – Center channel.
R – Right front channel.
LS – Left surround channel.
S – Surround channel (mono).
RS – Right surround channel.
LFE – Low Frequency Effects channel.
3 Analog level indicators