Playskool 33390 プリント

CAUTION: 

TO AVOID BATTERY LEAKAGE

1. Be sure to insert the batteries correctly and always follow

the toy and battery manufacturers' instructions; 

2. Never mix old and new batteries or alkaline, standard

(carbon-zinc) or rechargeable (nickel-cadmium) batteries;

3. Always remove weak or dead batteries from the product.

5.

Insert 3 "AA" alkaline batteries 

(not included) into the battery
compartment located in back of
register. Follow direction indicators
inside compartment. Use the
screwdriver to attach the battery
compartment door (packaged
separately).  

1

. Snap the 2 supports in place

at bottom of Playstore base as
shown. 

2

. Lay assembly flat down on a

table top or floor as shown.
Assemble the red plaque to
base, fitting plaque into place,
then securing with 4 screws
(included) and a Phillips
screwdriver (not included).

6.

To assemble the safe door to

safe compartment below
register, press and snap door
into hinges at an angle, as
shown. 

7.

To make night deposits, drop

the play money (bills and
coins) into the chutes on the
side of register, and it will
drop down directly into 
the safe. 

3

. Attach and fasten the safe

housing to the Playstore
assembly. Fit safe housing
inside fittings in Playstore,
angling in the right side first,
then the left. Secure housing
to Playstore with 3 screws
and the screwdriver. 

4.

Assemble the counter/register

to the Playstore base as
shown; fit the bottom of
counter into fittings on top of
base. Fasten the 5 fittings with
the screws included, and the
Phillips screwdriver. 

NOTICE: 

When the PLAYSKOOL Playstore is moved or knocked

over, the batteries inside the base may become slightly dislodged,
and the electronic features will not function properly. If this
happens, simply open the battery compartment, remove and re-
insert the batteries. If problems persist, the batteries may need to
be replaced.