Zadro Products SUN365 プリント

Sunlight 365 is a light that mimics natural 
sunlight.  It is designed specifically to 
produce certain wavelengths of light in order 
to give user the effect of artificial sunlight.

Light regulates our lives.  We wake up with 
the light and go to sleep when it is dark.

During winter months when there is not a lot 
of natural sunlight or when it’s raining or 
snowing, you might be affected by not being 
as active and feel the “blues”.  A bright light in 
a sunlight frequency can help as your brain 
perceives it as natural sunlight.   

• It is safe as there are no UV rays.
• There are no chemicals.
• It is portable so you can travel with this unit.

• 10,000 LUX of Light

• 35 Blue LED’s

• Adjustable Light Intensity 10% - 100%

• Countdown Timer

• Compact for Travel

• Programmable

• Desktop Clock

• LCD Backlight

• FREE POUCH

• Power Adapter

• Use as early as possible in the morning.

• Daily use: 30-60 minutes.

• Place at an arms length away.

Do not let this light treatment interrupt 
your normal activities: eating breakfast, 
reading newspapers, watching television, 
etc.

Glance at the light occasionally during 
each session.

On/Off

Timer

Intensity

Program

Up

Down

Note: The battery is for the clock function.

1. Slide open the battery cover.
2. Install the battery; make sure 
the polarity matches the 
markings in the compartment.
3. Use CR2032 x1 button cell 
battery (included).

IMPORTANT!
Keep the instructions. Do not discard.
Used batteries should be removed to 
avoid damage.

Slide To Open

To turn on the SUN365 press the “Power” 

button. The LCD display will show the “Time”

To turn the SUN365 off, press the “Power” 

button for approximately two to three 

seconds.  The LCD display will go blank.

To have just the LED lights on without 

programming, turn the SUN365 “ON” then 

press the “intensity” button. 
To turn off the LED light, press the “Timer” 

button.

1.  Turn on the SUN365.

2.  Press the program button, located on the lower

     center of the keypad.

3.  The LCD will show the timer time, the clock time,

     the program letter “A”, “B” or “C” and the LED

     intensity. As shown here:

4.    Press the program button again to set the hour.

5.    Press the clock/timer button to set the minutes.

6.    Press the “program” button again.

7.    A symbol of a bell will flash on the LCD display.

8.    Press the clock button to set the alarm hour.

9.    Press the clock button again to set the alarm

       minutes.

10.  To set the LED program, press the program

        button.

11.  The timer time program and intensity will be

        displayed on the LCD display.

12.  By using the “UP” & “DOWN” buttons, choose

        program “A”, “B” or “C”.

13.  Press the timer button and using the “UP” &

        “DOWN” buttons set the LED timer, 15, 30, 45 or

        60 minutes.

14.  Press the “Intensity” button to set the

        brightness of the LED’s from 10% thru 100%

15.  Press and hold the program button for

        approximately 3 seconds.

16.  The clock and function symbols will appear on

        the LCD.

17.  There will be a delay of 10 seconds, and then

        the SUN365 will run your set program.

Keep button cell battery out of reach of 

children. Do not use adapters other than 

those supplied with the product. Dispose of 

batteries according to the local laws and 

regulations of your region. Some batteries 

may be recycled, and may be accepted for 

disposal at your local recycling center. If you 

are not able to identify the applicable rules in 

your area, please check the instructions of the 

battery manufacturer. 

Plug adapter into SUN365 

and then plug adapter into 

power outlet.