iOptron 3130 ユーザーズマニュアル
2
iOptron’s AccuAligning
TM
polar scope #3130 is an accessory for SmartEQ portable German
equatorial mount. It provides a fast and accurate polar axis alignment with Quick Polar Alignment
procedure.
procedure.
Included in Package:
• 1X Polar scope #3130
• 1X Polar scope set screw
• 1X Polar scope illumination LED
• 2X M3 screw and nut
Figure 1. Parts list
Installation:
Install polar scope
1. Unscrew polar scope cover from the mount;
2. Insert included M4 set screw into the treaded hole on the polar scope housing, as show in
2. Insert included M4 set screw into the treaded hole on the polar scope housing, as show in
Figure 2. Use a hex key wrench to turn the screw few turns. Make sure the tip of the screw
does not penetrate into the hole, which will block the polar scope insertion.
does not penetrate into the hole, which will block the polar scope insertion.
Figure 2. Insert M4 set screw
eyepiece
Polar Scope
LED