Impex AB 4000 ユーザーズマニュアル

 
STEP 6   (See Diagram 6) 
 
A.)  Insert the Leg Developer Holder (#4) into the opening in front of the Seat.  Secure it with a Lock 

Knob underneath the Seat.  Attach the Leg Developer (#5) to the bracket on the Leg Developer 
Holder (#4). Secure it with an Axle (#12), two 

∅

 ¾” Washers (#39), and two M10 x 5/8” Allen 

Bolts (#31). Push the Olympic Sleeve (#13) onto the weight post on the Leg Developer. Attach 
the Sprint Clip (#19) to the Sleeve.  NOTE:  When using the bench at a decline position to do Ab 
exercises, place at least 30 lbs. of weights on the leg developer to hold it down. 

B.)  Insert one Foam Roll Tube (#11) halfway through the hole on the Leg Developer Holder (#4). 

Insert two Foam Roll Tubes (#11) halfway through the holes on the Leg Developer (#5). Push 
six Foam Rolls (#42) onto the Tubes from both sides. Plug six Foam Roll Caps (#22) to the 
ends. 

C.)  Attach the Arm Curl Pad (#21) to the Arm Curl Stand (#17). Secure it with two M8 x 5/8” Allen 

Bolts (#38) and 

∅

 5/8” Washers (#40). For Arm Curl exercises, remove the Leg Developer and 

insert the Arm Curl Stand into the top opening in front of the Seat.