JVC UX-GN7V ユーザーズマニュアル

Connect the speakers to the main unit by connecting the colored cables to the same color terminals on the 
rear of the main unit.

■ IMPORTANT
• Improper speaker cable connection reduces the 

stereo effect and sound quality. 

• The supplied speakers are magnetically 

shielded, but color irregularity may occur on the 
TV depending on some conditions. To prevent 
color irregularity, set up the speakers following 
the instructions below.
1. Turn off the main power of the TV before 

setting up the speakers. 

2. Place the speakers enough distance from the 

TV so that they do not cause color irregularity 
on the TV. 

3. Wait for approximately 30 minutes before 

turning on the main power of the TV again.

• The supplied speakers are manufactured exclu-

sively for use with the supplied main unit as 
parts of this system. Do not connect the supplied 
speakers to devices other than the supplied 
main unit. Doing so may damage the speakers. 

• Do not connect external speakers together with 

the supplied speakers. The change in imped-
ance may damage the main unit and the speak-
ers. 

Right speaker

(rear view)

Left speaker

(rear view)

Speaker cable

If insulation covers the tips of 
the speaker cables, twist and 
pull off the insulation before 
connecting the speaker cables. 

Main unit 

(rear view)

Red

Black

Preparation (continued)

Do not connect the power cable until all other connections have been made.

UX-GN7V[US]EN-03.fm  Page 7  Thursday, February 5, 2009  9:53 AM