JVC UX-GN7V ユーザーズマニュアル

This function allows you to easily understand dia-
log recorded on the disc/file even with the volume 
down low. This function is useful when you are 
watching a movie.

• Each time you press [C.VOICE], the setting 

turns on and off.

NOTE
• “C.VOICE” refers to “clear voice”.

You can listen to surround sound via headphones 
connected to the [PHONES] terminal. 

■When headphones are connected to the 

[PHONES] terminal

• Each time you press [3D P/HPS], the setting 

turns on and off.

NOTE
• The [PHONES] terminal is for connecting a pair 

of headphones equipped with a stereo mini plug 
(not supplied). When headphones are con-
nected, no sound is output from the speakers. 

• This function does not work for a JPEG, ASF, 

DivX, MPEG1 or MPEG2 file.

• “HPS” refers to “headphone surround”.

You can set the clock when the main unit is on or 
off. 

 

Press  or  to select the hour. 

Press  or  to select the minute.

• The clock starts from 0 seconds in the 

minute you set. 

NOTE
• While setting the clock, you can return to the 

previous step by pressing [CANCEL] or you can 
stop the setting by pressing [CLOCK/TIMER].

• To adjust the clock, press [CLOCK/TIMER] 

repeatedly until the clock appears in the display 
window, and then press [ENTER/SET]. The fol-
lowing procedure is the same as steps 2 to 5.

• Press [DISPLAY/CHARA] to display the clock 

when using this system. (Refer to page 21.)  

• The clock gains or loses approximately 1 minute 

per month.

• If the power cable of the main unit is discon-

nected from the AC outlet or the power is inter-
rupted, the clock setting is lost. Set the clock 
again.

Basic operations (continued)

UX-GN7V[US]EN-04.fm  Page 13  Wednesday, April 8, 2009  10:26 AM