Life Fitness Smith Machine ユーザーズマニュアル
Signature Smith Machine
Maintenance
ONCE A WEEK
O
Visually inspect all hardware, including jam nuts, for loosening, tampering or wear.
O
Check condition of hand grips.
ONCE A MONTH
O
Inspect hardware and tighten any bolts or nuts that may have loosened during use.
O
Clean Guide Rods with Break-Free
®
on a cotton cloth wipe off old residue. Clean visible sides of linear bearings on carriages.
O
Check Jam Nuts on Rod Ends for tightness.
ACTION
DAILY
MONTHLY
BI-ANNUALLY
AS NEEDED
CLEAN
Hand Grips
X
Guide Rods
X
INSPECT
Hardware
X
Frame
X
Hand Grips
X
Jam Nuts
X
CLEAN
O
Wax Frames with standard, non-abrasive wax finish.
O
Hand grips with mild soap and water.
O
Guide Rods with cotton cloth and Break-Free
®
(SK50-P0005-0000).
INSPECT
O
Hardware should be checked for looseness. Tighten as required using metric tools.
O
Frames should be inspected for wear or damage.
O
Hand grips should be checked for wear or damage.
O
All paint chips should be filled immediately with touch-up paint.
NOTE:
Use polishing compound (such as car wax) to clean and remove shoe scuffs from frame surfaces as necessary.
NOTE:
For parts and service call Customer Support Services at (800)351-3737 or (847)451-0036, Monday through Friday 8:00 a.m. to 6:00 p.m. Central Standard Time.
Please have available your name, address and serial number of your product.
©
2007 Life Fitness, a division of Brunswick Corporation. All rights reserved.
Life Fitness is a registered trademark of Brunswick Corporation.
SSM
10/12/07
8376701 RevA-1