Hitachi 13VR10B ユーザーズマニュアル

PRESET FOR USE 

 

19

The first time you may want to selct language (English or Espanol=Spanish) 
and preset the tuner to scan only the channels you receive in your area. You 
must use the remote control for the following steps. 

NOTE: Channel memory programming is not needed when using a 
converter/descrambler box. 

1 Connect the TV/VCR power cord 
Plug the TV/VCR power cord into a standard AC outlet. 
2 Turn on the TV/VCR 
Press the POWER button to turn on the TV/VCR. 
3 Select "ENGLISH" or "ESPANOL" 

 

Select "ENGLISH" or "ESPANOL=Spanish" using CH 

 or 

 button or 

SELECT button. "[ ]" marks indicate the selected language. 
4 Begin auto preset 
Press MENU button to point to "AUTO PRESET" 

 

Then press SELECT button. The tuner scans and memorizes in the active 
channels in your area. 

NOTES: 
The TV/VCR distinguishes between standard TV channels and CATV 
automatically. 
If you want to play or record a video tape BEFORE presetting the tuner, you must 
press MENU button. To preset the tuner again, see "AUTO PRESET AGAIN". 

5 After scanning 
The tuner stops on the lowest memorized channel. (TV mode: from CH 02/ 
CATV mode: from CH 01) You may want to recall the selected channels, you 
can select the desired channel directly with the remote control number button 
or CH 

 or 

. 

Press MENU button in scanning mode.