Hitachi 13VR10B ユーザーズマニュアル

SEARCH 

 

39

• The index mark will be made automatically when the REC button is pressed. It 
will also be marked at the starting point of Timer recording and OTR. 
• The index mark is not recorded if the PAUSE/STILL button is pressed and 
released during recording. 
• The time gap between making the index marks on the tape should be greater 
than 1 minute for SP recording, 2 minutes for LP recording and 3 minutes for 
SLP recording. 
• Index marks cannot be made if the erase-protection tab on the cassette has 
been removed. 
• Index search can be set up to 20. 
• This function is not operative in recording mode. 
• Counter Memory function is not operative in this mode. 
• You must use the remote control for this procedure. 

Make sure... 
• Power must be turned on. 
• Insert a tape. 

In the example below: You are watching fourth program (progrm number 4) 
and want to fast forward to seventh program (program number 7). You must 
skip three programs. 

 

1 Select "INDEX SEARCH" mode 

 

Press MENU button repeatedly to point to "INDEX SEARCH". 
Then, press SELECT button. 

 

 

 

 

2 Enter your desired number of program that you want to skip 

 

Press CH 

 or 

button repeatedly until your desired number of program 

that you want to skip is appeared. (Example: To skip three programs) 

3 Begin Index Search