JVC MNV*SW*YP ユーザーズマニュアル
30
Troubleshooting
No power is applied to the Player.
m
Is the power cord disconnected?
– Connect it.
– Connect it.
Remote control does not function.
m
Are the batteries discharged?
– Replace with new ones.
– Replace with new ones.
Disc tray does not come out when OPEN/
m
Is the power cord disconnected?
CLOSE button is pressed.
– Connect it.
Sound is distorted or noise is generated.
m
Is the disc dirty?
Image is garbled.
– Wipe off the disc surface with a soft cloth.
m
Is the correctly connected?
Sound is intermittent.
m
Is the disc dirty?
Image is garbled.
– Wipe the disc surface with a soft cloth. (
Z
p.4)
m
Is the disc scratched?
m
Is the disc warped?
– Replace the disc with a new one.
– Replace the disc with a new one.
No image is displayed on the monitor.
m
Is the monitor set to the AV mode?
– Set it to the AV mode.
– Set it to the AV mode.
Noise appears during visual search.
m
This is normal.
Noise appears during normal or slow-motion
m
Is the automatic tracking mode engaged?
playback.
– Try manual tracking. (
Z
p.19)
No sound from the microphone is heard.
m
Is the microphone volume adjusted at the lowest level? (
Z
p.25)
Recording does not function.
m
Is a cassette loaded?
m
Is the safety tab on the cassette removed?
– Reseal the slot with adhesive tape.
– Reseal the slot with adhesive tape.
Tape-to-tape editing or camera recording is not
m
Is the camcorder or another video recorder correctly connected?
possible.
m
Are all necessary power switch turned ON?
Whistling or howling is heard from TV during
m
Move camcorder or camera’s microphone away from TV or reduce
camera recording.
TV sound volume.
The Player does not function properly.
m
Microcomputer malfunction. Disconnect the power plug from the
AC outlet and then re-insert it.
The microcomputer will be reset to its initial mode.
AC outlet and then re-insert it.
The microcomputer will be reset to its initial mode.
Symptoms
Check point