Pelco C1301M ユーザーズマニュアル
C1301M (6/05)
19
Quick Programming Guide
(See Page 9)
BACKLIGHT COMPENSATION (BLC)
If a bright backlight is present, the subjects in the picture may appear dark or as a silhouette.
Backlight compensation enhances objects in the center of the picture. The system uses the center of
the picture to adjust the iris. If there is a bright light source outside of this area, it will wash out to
white. The camera will adjust the iris so that the object in the sensitive area is properly exposed.
Backlight compensation enhances objects in the center of the picture. The system uses the center of
the picture to adjust the iris. If there is a bright light source outside of this area, it will wash out to
white. The camera will adjust the iris so that the object in the sensitive area is properly exposed.
There are two backlight compensation settings:
ON
Backlight compensation is activated.
OFF (default)
Backlight compensation is not activated.
NOTE:
If backlight compensation is ON, decrease the Auto Iris setting and adjust the Auto IR Level
to a darker setting. Refer to the
sections.
VIDEO LEVEL
Set the video output to one of the following:
NORMAL - 1.0 volt peak-to-peak
HIGH (default setting) - 1.2 volt peak-to-peak to compensate for losses in video cable.
WIDE DYNAMIC RANGE (23X DAY/NIGHT CAMERA)
The wide dynamic range (WDR) setting balances the brightest and darkest sections of a scene to
produce a picture that is better balanced in lighting and provides more detail. The range from the
darkest to the brightest sections of the scene is 80X more when WDR is ON than when OFF.
produce a picture that is better balanced in lighting and provides more detail. The range from the
darkest to the brightest sections of the scene is 80X more when WDR is ON than when OFF.
Available settings are OFF and ON. The default setting is OFF. When wide dynamic range is set to
ON the frame rate is reduced from the standard 30 frames per second to 15 frames per second.
ON the frame rate is reduced from the standard 30 frames per second to 15 frames per second.
EXIT
LANGUAGE
ENGLISH
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<UNIT SETTINGS>
<DISPLAY SETUP>
<UNIT SETTINGS>
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
CYCLE CAMERA POWER
REBOOT SYSTEM
PELCO EXSITE EHXM
<CAMERA>
<OTHER>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<WINDOW BLANKING>
<ALARMS>
<WIPER>
<AUX>
<CLEAR>
<PASSWORD>
<OTHER>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<WINDOW BLANKING>
<ALARMS>
<WIPER>
<AUX>
<CLEAR>
<PASSWORD>
BACK
EXIT
EXIT
UNIT SETTINGS
TYPE OF LIGHTING
OUTDOOR
AUTO FOCUS
ON
ZOOM LIMIT
X184
ZOOM SPEED
MEDIUM
LOW LIGHT LIMIT
2
IR CUT FILTER*
AUTO
AUTO IR LEVEL*
DUSK
<ADVANCED SETTINGS>
BACK
CAMERA
SHUTTER SPEED
AUTO
AGC LIMIT
28
AUTO IRIS
AUTO
AUTO IRIS LEVEL
91
AUTO IRIS PEAK
16
AUTO SHARPNESS
ON
SHARPNESS LEVEL
26
AUTO WHITE BALANCE
ON
R GAIN
146
B GAIN
294
BACKLIGHT COMP
OFF
VIDEO LEVEL
HIGH
WIDE DYNAMIC RANGE*
OFF
BACK
EXIT
EXIT
ADVANCED SETTINGS
* Available only with the 23X day/night camera.
Wide Dynamic Range ON
Wide Dynamic Range OFF