Peerless Industries SA730P-S ユーザーズマニュアル
6 of 29
ISSUED: 05-09-05 SHEET #: 095-9224-9 12-05-09
Insert two M4 x 12 mm screws (D) into top two holes of
screen, leaving approximately 1/4" of exposed thread. Hook
screws onto keyslots of adapter plate as indicated in figures
2.1 and 2.2.
screen, leaving approximately 1/4" of exposed thread. Hook
screws onto keyslots of adapter plate as indicated in figures
2.1 and 2.2.
*Note: If hole pattern is in a pocket, insert two M4 x 20 mm
screws (E) with two retaining spacers (F) into top two holes
of screen as indicated right.
screws (E) with two retaining spacers (F) into top two holes
of screen as indicated right.
2
fig. 2.1
• If screws don't get three complete turns in the screen inserts or if screws bottom out and bracket is still not tightly
secured, damage may occur to screen or product may fail.
WARNING
Insert one M4 screw (D or E) through bottom hole of
adapter plate as shown in figure 3.1.
adapter plate as shown in figure 3.1.
FOR VESA
®
75
MOUNTING PATTERN:
FOR VESA
100
MOUNTING PATTERN:
1/4"
fig. 2.2
fig. 3.1
D or E
ADAPTER
PLATE
PLATE
D
F
*For screens with
a hole pattern in a
pocket, spacers (F)
go between adapter
plate and screen.
a hole pattern in a
pocket, spacers (F)
go between adapter
plate and screen.
3