Peerless Industries SUA746PU ユーザーズマニュアル

ISSUED: 10-24-11  SHEET #: 095-9364-1

Wall arm assembly (A) must be in closed position to 
hang display.

Rotate safety latch with fl athead screwdriver into 
unlocked position as shown in detail 1.

Hook adapter brackets (B) onto the center of wall 
arm assembly (A) adapter plate as shown in fi gure 
3.1.

•  Always use an assistant or mechanical lifting equipment to safely lift and position the fl at panel displays.

•  Be careful not to pinch fi ngers when opening and closing mount from the wall.

•  DO NOT operate or tilt arm assembly when safety latches are in unlocked position. Product may fail and may cause 

injury or damage to display.

•  Do not tighten safety/security screw (E) with excessive force. Overtightening can cause screw head to become 

damaged making it diffi cult to remove. Tighten screws to 15 in•lb (1.7 N.M.) maximum torque.

3

SAFETY LATCH

SAFETY 
LATCH

Rotate safety latch with fl athead screwdriver and 
install safety/security screw (E) through safety latch 
into adapter bracket with phillips screwdriver to lock 
to adapter plate as shown in detail 2 and detail 3.