3M 8211 ユーザーズマニュアル

Before use, wearer must read and understand these User Instructions. Keep these instructions for reference.

Particles such as those from grinding, sanding, sweeping, sawing, bagging, or processing minerals, coal, iron ore, flour, metal, 

wood, pollen, and certain other substances. Liquid or non-oil based particles from sprays that do not also emit oil aerosols 

or vapors. Follow all applicable local regulations. For additional information on 3M use recommendations for this class of 

respirator please consult the 3M Respirator Selection Guide found on the 3M Personal Safety Division web site at 

www.3M.com/PPESafety or call 1-800-243-4630 in U.S.A. In Canada call 1-800-267-4414.

Do not use for gases and vapors, oil aerosols, asbestos, or sandblasting; particulate concentrations that exceed either 10 times 

the occupational exposure limit or applicable government regulations, whichever is lower. In the U.S., do not use when the 

Occupational Safety and Health Administration (OSHA) substance specific standards, such as those for, arsenic, cadmium, lead 

in the construction industry, or 4,4’-methylene dianiline (MDA), specify other types of respiratory protection. This respirator 

does not supply oxygen.

This respirator can help reduce inhalation exposures to certain airborne biological particles (e.g. mold, Bacillus anthracis, 

Mycobacterium tuberculosis, etc.) but cannot eliminate the risk of contracting infection, illness or disease. OSHA and other 

government agencies have not established safe exposure limits for these contaminants.

1.  Failure to follow all instructions and limitations on the use of this respirator and/or failure to wear this respirator during all 

times of exposure can reduce respirator effectiveness and 

2.  In the U.S., before occupational use of this respirator, a written respiratory protection program must be implemented 

meeting all the requirements of OSHA 29 CFR 1910.134 such as training, fit testing, medical evaluation, and applicable 

OSHA substance specific standards. In Canada, CSA standard Z94.4 requirements must be met and/or requirements of the 

applicable jurisdiction, as appropriate. Follow all applicable local regulations.

3.  The particles which can be dangerous to your health include those so small that you cannot see them.

4.  Leave the contaminated area immediately and contact supervisor if dizziness, irritation, or other distress occurs.

5.  Store the respirator away from contaminated areas when not in use.

6.  Inspect respirator before each use to ensure that it is in good operating condition. Examine all the respirator parts for 

signs of damage including the two headbands, staples, exhalation valve and noseclip. The respirator should be disposed 

of immediately upon observation of damaged or missing parts. Filtering facepieces are to be inspected prior to each use 

to assure there are no holes in the breathing zone other than the punctures around staples and no damage has occurred. 

Enlarged holes resulting from ripped or torn filter material around staple punctures are considered damage. Immediately 

replace respirator if damaged. Staple perforations do not affect NIOSH approval. 

7.  Conduct a user seal check before use as specified in the Fitting Instructions section. 

8.  Dispose of used product in accordance with applicable regulations.