Multiquip MC3PE ユーザーズマニュアル

1. Remove the mixer drum  and associated components from

the packing container (Figure 6). Match the components
against the parts list to make sure that they are all accounted
for.

4. Place the two halves of the optional support stand together

(Figure 9). The left support stand fits into the center boss on
the right support stand.

5. Insert the adapter pin through bosses as shown in Figure 9.

Once the adapter pin has been inserted and aligned, insert
the locking pin. Place the round part of the locking pin over
the bottom section of the adapter pin.

2. Place the mixer frame on a secure level surface, and attach

the top cover as shown in Figure 7.

3. Fit the mixing drum onto gearbox shaft as shown in Figure

8. Rotate drum in a clockwise direction, make sure the drum
fits right up to the shoulder on the gearbox shaft.

DO NOT 

spin the drum on fast, as this may

damage the gearbox.