Lanier 5635 ユーザーズマニュアル
File Transfer
5 - 14
User Tools Settings
File Transfer
Be sure to make these settings if you are using ScanRouter V2 Lite/Professional. Note r The
optional ScanRouter V2 Professional is required for distributing received fax documents.
optional ScanRouter V2 Professional is required for distributing received fax documents.
Delivery Server IP Address
Specifies the IP address of the ScanRouter V2 Lite delivery server for distributing documents or
data from the machine.
data from the machine.
Default: 000.000.000.000
•
Press arrow keys to move between each group of three numbers.
•
If you make a mistake, press the “Clear” key and enter the correct number.
Fax RX File Transmission
•
Setting per Line
Specifies whether or not received fax documents should be sent to the ScanRouter V2
Professional for each of the fax lines.
Professional for each of the fax lines.
Default: G3 Port 1/Do not Deliver, G3 Port 2/Do not Deliver, G3 Port 3/Do not Deliver
•
Print at Delivery
Specifies whether or not received fax documents that are sent to the Scan-Router V2
Professional should also be printed by the machine at the same time.
Professional should also be printed by the machine at the same time.
Default: No
•
File to Deliver
Specifies whether all received fax documents or only received fax documents that
include delivery codes (documents with an ID and F code) should sent to the
ScanRouter V2 Professional.
include delivery codes (documents with an ID and F code) should sent to the
ScanRouter V2 Professional.
Default: File with Dlvry Code
•
Delivery Failure File (Dlvry Failure File) If a received fax document cannot be sent to
the ScanRouter V2 Professional, the documents is stored in the machine's memory.To
print this stored data select “Print File”, to delete the data select “Delete File”.
print this stored data select “Print File”, to delete the data select “Delete File”.
If the machine can send data to the ScanRouter V2 Professional, data is sent automatically.
If you delete the data, you will not be able to distribute or print the data.
Recall Interval Time
Specifies the interval the machine waits before sending data or a document, if a data could not be
sent to the ScanRouter V2 Professional.
sent to the ScanRouter V2 Professional.
Default: 300 Seconds
•
Enter an interval within the range of “60 -999 seconds” (in one second intervals) with
the number keys.
•
This setting is for the Scanner function. The distribution of received fax documents will