Lanier 5635 ユーザーズマニュアル
Using the Finisher Option
7 - 6
Using Finisher/Sorters
Selecting Punch Mode
Note: The optional finisher and bridge unit must be installed to use this function.
1
Touch the Punch key.
2
Enter the number of copy sets.
3
Set the originals in place, then
press the Start key. Your copies
will exit on the Finishers Shift
Tray with holes punched in
them.
press the Start key. Your copies
will exit on the Finishers Shift
Tray with holes punched in
them.
4
Press the Start key.
5
To remove the paper punch outs from the finisher, refer to “Removing Chad” on page 9-20
With the optional punch installed, you can have three holes punched into your copy sets.