Patton electronic 49040 ユーザーズマニュアル

Installing the gateway

SmartNode 4940 User Manual 

•

IP addresses of central H.323 gatekeeper (if used)

•

IP addresses and/or URL of SIP servers or Internet telephony services (if used)

•

Login and password for SIP or H.323 based telephony services

•

IP addresses of central TFTP server used for configuration upload and download (optional)

You will need a PC (or equivalent) with Windows Telnet or a program such as Tera Term Pro Web to config-
ure the software on your SmartNode router.

If you suspect that your AC power is not reliable, for example if room lights flicker often or there is machinery 
with large motors nearby, have a qualified professional test the power. Patton recommends that you include an 
uninterruptible power supply (UPS) in the installation to ensure that VoIP service is not impaired if the 
power fails. Refer to 

The SmartNode router is intended to be placed on a desktop or similar sturdy, flat surface that offers easy 
access to the cables. Allow sufficient space at the rear of the chassis for cable connections. Additionally, you 
should consider the need to access the unit for future upgrades and maintenance.

Under the rack mount option, the chassis can be equipped with rack mount 
ears that allow for use in a 19” rack.

SmartNode hardware installation consists of the following:

•

Placing the device at the desired installation location (see section 

•

Connecting the interface and power cables (see section 

When you finish installing the SmartNode, go to chapter 4,

Place the unit on a desktop or similar sturdy, flat surface that offers easy access to the cables. The unit should 
be installed in a dry environment with sufficient space to allow air circulation for cooling. 

For proper ventilation, leave at least 2 inches (5 cm) to the left, right, front, 
and rear of the unit.

WARNING