Radio Shack 15-1925 ユーザーズマニュアル
Need help? Call 1-800-950-7044
12
OPERATION
1. Press the device key for the device you want
to operate, then point the 6 in 1 at the device
and press
and press
PWR
(or
CH s
for some cable con-
verters) to turn the device on.
2. Repeat Step 1 for all other devices you want
to operate.
3. Point the 6 in 1 IR/RF Remote Control
toward the device you want to control, then
press the appropriate device key and the
desired command keys.
press the appropriate device key and the
desired command keys.
Note: The command keys on the 6 in 1 IR/
RF Remote Control work the same as the
keys on the original remote control; however,
the labeling might differ slightly.
RF Remote Control work the same as the
keys on the original remote control; however,
the labeling might differ slightly.
4. To turn off the last device you selected, press
PWR
. To turn off other devices, press the
device key for the device you wish to turn off,
then press
then press
PWR
.
USING THE 6 IN 1’S RF
COMMAND CONSOLE
COMMAND CONSOLE
To operate your IR remote-controlled devices
from anywhere in your house, make sure the front
of the RF command console points toward the de-
vice(s) that you want to control, and fully extend
the console’s antenna. Press the appropriate de-
vice key on your 6 in 1, then the desired function
keys.
from anywhere in your house, make sure the front
of the RF command console points toward the de-
vice(s) that you want to control, and fully extend
the console’s antenna. Press the appropriate de-
vice key on your 6 in 1, then the desired function
keys.
CHANNEL SCAN
Channel Scan lets you scan through all available
channels on your TV, VCR, or cable converter,
stopping at each for about 3 seconds.
channels on your TV, VCR, or cable converter,
stopping at each for about 3 seconds.
1. Press the device key (
TV
,
VCR
, or
CBL
).
15-1925.fm Page 12 Monday, July 19, 1999 12:59 PM