Jasco RM24914 ユーザーズマニュアル

12

This remote lets you select which device Mode 
controls your Volume/Mute buttons. The remote 
is initially set for all device Modes to use their own 
Volume/Mute control if present. If the programmed 
code has no Volume/Mute operation of its own then 
those buttons will punch-through control to the 

TV 

Mode device without needing to change to

 TV Mode. 

This routine can set all Modes to “punch-through” 
to any one chosen Mode for Volume/Mute button 
control without the needing to change to that 

Mode.
1.   Press and hold the 

SETUP button until the red 

indicator turns on, then release the button.

2.   Press and hold the 

MUTE button until the red 

indicator blinks off, then release the button.

3.   Press and release the desired Mode button 

(

TV, VCR, etc.) for Volume/Mute control, the 

red indicator blinks then stays on.

4.   Press and release the 

MUTE button 

and the red indicator turns off. The 
red indicator will blink rapidly for three 
seconds if the Mode you have selected 
has no Volume/Mute control.  

All other Modes will now punch-through to 

your chosen Mode for Volume/Mute control.