Land Pride 4220ST プリント

Your Back Screen & Head Rest is exclusively designed
for the Heavy Duty 4-Post Accessory Bar. Please read
these installation instructions and your Treker
Operator’s Manual thoroughly before beginning.
Especially read information relating to safety concerns.
Also included in the Operator’s Manual is important
information on operation, adjustment, troubleshooting,
and maintenance for this attachment (some manual
sections do not apply to all accessories).

A separate Parts Manual for replacement parts can be
purchased from your dealer or available free of charge at
www.landpride.com. Have model and serial numbers
handy when placing an order.

• Operator’s Manual (4220/4420 ST) . . . . 700-504M

• Parts Manual (4220/4420 ST) . . . . . . . . 700-504P

Your dealer wants you to be satisfied with your new
Treker. If for any reason you do not understand any part
of this manual or are not satisfied with the service
received, the following actions are suggested:

1.

Discuss the matter with your dealership service
manager making sure he is aware of any problems
you may have and that he has had the opportunity to
assist you.

2.

If you are still not satisfied, seek out the owner or
general manager of the dealership, explain the
problem and request assistance.

3.

For further assistance write to:

P.O. Box 5060

Salina, Ks. 67402-5060

E-mail address

lpservicedept@landpride.com

When you see this symbol, the subsequent
instructions and warnings are serious - follow
without exception. Your life and the lives of
others depend on it!

IMPORTANT: Before you begin, read these
instructions and check to be sure all parts and tools
are accounted for. Please retain these installation
instructions for future reference and parts ordering
information.

These assembly instructions apply to the following Back
Screen and Head Rest accessories listed below:

Safety Glasses

Work Gloves

Two 7/16" box end or open end wrenches

Two 1/2" box end or open end wrenches

A detailed listing of parts for each accessory kit is
provided on page 2. Use the list that is for your kit as a
checklist to inventory parts received. Please contact
your local Land Pride dealer for any missing hardware.

Before servicing the vehicle the following procedure
must be met to secure the vehicle:

1.

Park vehicle on a level surface. Don’t work under or
around a vehicle parked on an incline.

2.

Set shift selector in Park.

3.

Turn ignition switch off and remove switch key.

4.

Chock front and back of a wheel to prevent the
vehicle from rolling.

11/28/06