Mitsubishi Electronics FX5 ユーザーズマニュアル
2
[DESIGN PRECAUTIONS]
[INSTALLATION PRECAUTIONS]
[WIRING PRECAUTIONS]
CAUTION
● After the CPU module is powered on or is reset, the time taken to enter the RUN status varies
depending on the system configuration, parameter settings, and/or program size.
Design circuits so that the entire system will always operate safely, regardless of this variation in time.
Design circuits so that the entire system will always operate safely, regardless of this variation in time.
CAUTION
● Connect the expansion board and expansion adapter securely to their designated connectors. Loose
connections may cause malfunctions.
● Connect the extension cables, peripheral device cables, input/output cables and battery connecting
cable securely to their designated connectors. Loose connections may cause malfunctions.
● When using an SD memory card, insert it into the SD memory card slot. Check that it is inserted
completely. Poor contact may cause malfunction.
● Turn off the power to the PLC before attaching or detaching the following devices. Failure to do so
may cause device failures or malfunctions.
-
-
Peripheral devices, expansion board and expansion adapter
-
Extension modules, bus conversion module and connector conversion module
-
Battery
CAUTION
● Do not bundle the power line, control line and communication cables together with or lay them close to
the main circuit, high-voltage line, load line or power line. As a guideline, lay the power line, control
line and connection cables at least 100 mm (3.94") away from the main circuit, high-voltage line, load
line or power line. Noise may cause malfunctions.
line and connection cables at least 100 mm (3.94") away from the main circuit, high-voltage line, load
line or power line. Noise may cause malfunctions.