Marantz RC1200 ユーザーズマニュアル

38

When the 

 Cursor button ⁄0 is pressed, LCD

a  displays 

, while LCD 

b displays

.

One square (

7) in LCD c is equivalent to an

interval of 0.5 seconds, allowing intervals of up
to 5 seconds to be set. The remote controller is
set at the factory with an interval of 1 second,
as indicated by (

77&&&&&&&&). Adjust the

interval between transmission of operation
codes using the 

 and 

 Cursor buttons ⁄0,

then press the 

Cursor button ⁄0.

• To cancel the setting, press any button

other than the Cursor button ⁄0.

When the ^ or 

 Cursor button ⁄0 is pressed,

appears at LCD 

B.  Every 

7 at LCD C

represents a second, and a lighting duration
of up to 10 seconds can be set.
The unit is set at the factory with a duration of 5
seconds (

77777&&&&&). When 0 is set, only

the 

 button ⁄9 can be used to light

up the LCD display: no other buttons can be
used to perform this operation.
Press the 

 Cursor button ⁄0 to decrease the

lighting duration; conversely, press the 

button to increase it.

• After setting the duration, press the 

Cursor button ⁄0.

• To cancel the setting, press any button

except the Cursor button ⁄0.

• To continue with the setting, press the ^ or 

Cursor button ⁄0.