Universal Remote Control RCU600 ユーザーズマニュアル
4
Other Keys (Listed Alphabetically)
Certain keys on the six-component universal remote
have dual functions. Primary functions are printed in
black. Secondary key functions are printed in blue on
the remote and are used for AUDIO operations.
have dual functions. Primary functions are printed in
black. Secondary key functions are printed in blue on
the remote and are used for AUDIO operations.
0-9
(Number Keys): operate the same as number keys
on your original remote and are used to enter component
codes when programming the remote control with
Direct Entry method.
codes when programming the remote control with
Direct Entry method.
ANTENNA:
in TV Mode, switches between the signal
coming from a satellite receiver or cable box and an
off-air antenna. In VCR Mode, switches between the
signal coming from a VCR and a TV.
off-air antenna. In VCR Mode, switches between the
signal coming from a VCR and a TV.
CH+
and CH- (CHANNEL UP and CHANNEL DOWN):
goes to the next highest or lowest channel number in
the component channel list, respectively, except for
DVDs. In DVDs, the CH+ and CH- keys refers to the
NEXT/PREVIOUS
the component channel list, respectively, except for
DVDs. In DVDs, the CH+ and CH- keys refers to the
NEXT/PREVIOUS
chapter.
CLEAR:
removes the on-screen display to return
to normal viewing.
CODE SEARCH:
use to program the remote.
ENTER:
use with Manual or Automatic Code Search
method to accept code (See Code Lists enclosed). Also, some
brands require you to press the ENTER key after you enter
a channel number. In some menu systems, you must press
the ENTER key to select a highlighted item.
brands require you to press the ENTER key after you enter
a channel number. In some menu systems, you must press
the ENTER key to select a highlighted item.
GO BACK:
switches back to previous channel– operates the
same as PREV CH, LAST CHANNEL or RECALL keys found
on some brands of remote controls.
on some brands of remote controls.
GUIDE:
brings up the on-screen TV program guide,
if your TV is equipped with that feature.
INFO:
shows program information, if your component
is equipped with this feature. Functions the same as a
DISPLAY
DISPLAY
key.
INPUT:
selects the video inputs of your TV, if equipped
with this feature.
MENU•PROG:
accesses DVD disc menus when playing
a DVD disc. Accesses menu systems of some TVs, a few RCA
brand VCRs and satellite receivers. (For more information,
refer to the On-screen Menus section on page 12).
brand VCRs and satellite receivers. (For more information,
refer to the On-screen Menus section on page 12).
MUTE:
lowers the TV’s volume to its minimum level.
NAVIGATION KEYS
& SELECT: used to move through on-
screen menus and guides. Use the NAVIGATION keys to
move the highlighted choice up, down, left or right.
move the highlighted choice up, down, left or right.
ON•OFF:
turns component on and off.
Note
: Some RCA, GE and PROSCAN models require that
you press the component
key to turn the component on and the ON•OFF key to turn the component off.
key to turn the component on and the ON•OFF key to turn the component off.
PIP:
(Picture-in-Picture) and SWAP operate your TV’s Picture-in-Picture, if your
TV is equipped with this feature.
RECORD:
use with VCR to record programming. You must press the RECORD key
twice to start recording.
SLEEP:
allows you to set a time to turn off your TV automatically.
VOL:
increases or decreases the TV or AUDIO system’s volume level.
Primary Key Descriptions For VIDEO Operations
RCU600WMS_IB.qxd 6/5/03 16:55 Page 4