Mitsumi electronic IB-1500875(ENG)-E ユーザーズマニュアル

4 - 29

Arranging drive units in the horizontal as much as possible is recommended. Thus, if the drive units 

must be arranged in the vertical, or if the drive units must be separated by more than 30mm, arrange 

them with the DC connection length of 500mm or less.

1. D: For MDS-D-V1-320W, MDS-D-SP-240 to 640, the separated wiring is not available.

DH: For MDS-DH-V1-160W to 200, MDS-DH-SP-160 to 480, the separated wiring is not available.

2. If the drive units are separated by more than 30mm, twist the wires used for the DC connection or 

bundle them with a fixing band in order to prevent two wires from being separated.

3. Failure to observe the above arrangement could damage the units.

 

Fixing band

Twist

1mm

1mm

500mm or less