Xantrex Technology RC/GS RC7 ユーザーズマニュアル

Operation

28

975-0210-01-01

The yellow Batt. Full LED indicates the state of charge on the 
batteries. This LED will not illuminate until the batteries have 
charged up to at least 90% (according to the inverter/charger’s 
estimate). The duration of the LED’s on time will increase 
until the batteries reach 100%, at which time the LED will be 
on solid. In the inverter mode, the off time duration of the LED 
will increase until the batteries discharge to below 90%, at 
which time the LED will turn off.

The Error LED indicates that there is a problem with the 
inverter/charger, batteries or generator. Check the LCD 
screen to find and correct the nature of the problem. For more 
information, see “Genset Error Messages (RC/GS Only)” on 
page 32 and “Inverter/Charger Error Messages” on page 37.

The screen is used for setting up the system operation as well 
as viewing current status or error messages. It has two 16-
character lines and a backlight. You can scroll through the 
screen items by using the buttons below the screen.

Solid

Battery fully charged (100%)

Flashing

Yellow charge 
LED (flashing)

Battery charged 90% or higher

OFF

Battery below 90% charge

ON

 (

S

olid)

Check system

Figure 4-2 LCD screen

System Status:

Equalizing

RC-GS_manual.book  Page 28  Thursday, May 26, 2005  4:58 PM