Philips DCR 2021 ユーザーズマニュアル
75
EN
9.5 Display
This screen is used to set the TV output signal
parameters.
1 Select values for the following:
parameters.
1 Select values for the following:
• TV Screen Format: select 4: 3 or 16: 9
depending on your TV screen format
• Display Format: Letter Box, Centre cut-out, or
Auto
• TV SCART Output: default setting is RGB. Do
not modify it unless your TV does not support
RGB.
RGB.
• AV Control: for proper operation, it is
recommended to keep this setting to ON.
2 Press EXIT to exit the screen.
9.6 Dolby Digital
This screen is used to enable/disable automatic selection
of Dolby Digital sound.
When Dolby Digital is disabled, you can still get stereo
sound in digital format (PCM).
of Dolby Digital sound.
When Dolby Digital is disabled, you can still get stereo
sound in digital format (PCM).
9.7 Wake-up channel
This screen is used to set the channel to be tuned at
the receiver wake-up. Default setting is channel 200.
the receiver wake-up. Default setting is channel 200.
DCR 2021_Premiere_indice 1b 7/03/06 11:45 Page 75