Philips FTR9964/69S ユーザーズマニュアル
3
Preparation
&
Place the receiver box wherever you want, but make sure that air can
circulate freely through the ventilation slots. Do not install the receiver box in
a confined space such as a book case or a similar unit.
To prevent any unsafe situations, no naked flame sources, such as lighted
candles, should be placed on or in the vicinity. Avoid heat, direct sunlight and
exposure to rain or water.
The equipment shall not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on it.
circulate freely through the ventilation slots. Do not install the receiver box in
a confined space such as a book case or a similar unit.
To prevent any unsafe situations, no naked flame sources, such as lighted
candles, should be placed on or in the vicinity. Avoid heat, direct sunlight and
exposure to rain or water.
The equipment shall not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on it.
é
Connect the supplied aerial cable 1 and the
VGA
cable with trailing audio
cinch connectors 2 as shown in the inside frontcover of this handbook.
Make sure all screws of the cable 2 are tightened well.
Make sure all screws of the cable 2 are tightened well.
TV receiver box with speakerless monitor
In case you connect your TV receiver box with a speakerless monitor, and without
having connected an audio receiver, all references made in this instruction book to
sound reproduction, volume control, and audio connections, are not applicable
(except for a headphone connection).
The keys on the remote control referring to sound have no function either.
In case you connect your TV receiver box with a speakerless monitor, and without
having connected an audio receiver, all references made in this instruction book to
sound reproduction, volume control, and audio connections, are not applicable
(except for a headphone connection).
The keys on the remote control referring to sound have no function either.
“
To connect your computer, see the separate supplied instruction manual with
your monitor.
To connect other peripherals, see p. 28.
If you dispose of a Cinema Link combination (Cinema Link Audio receiver
and/or Cinema Link video recorder and/or DVD player), see the separate
supplied instruction manual.
In order to obtain the best result, please use only the supplied antenna cables
between the receiver box and videorecorder, and between videorecorder and
antenna connector.
your monitor.
To connect other peripherals, see p. 28.
If you dispose of a Cinema Link combination (Cinema Link Audio receiver
and/or Cinema Link video recorder and/or DVD player), see the separate
supplied instruction manual.
In order to obtain the best result, please use only the supplied antenna cables
between the receiver box and videorecorder, and between videorecorder and
antenna connector.
‘
Insert the mains cord supplied 3 into the
MAINS
at the back of the monitor
and the mains cord 4 at the back of the receiver. Put both in the wall
sockets.
sockets.
(
Remote control: Remove the cover of the battery compartment.
Insert the 2 batteries supplied (Type R6AA-1.5V).
Press the TV key to be sure your remote control is in the TV mode.
The batteries supplied do not contain the heavy metals mercury and cadmium.
Nevertheless in many countries batteries may not be disposed of with your
household waste. Please check on how to dispose of batteries according to local
regulations.
Insert the 2 batteries supplied (Type R6AA-1.5V).
Press the TV key to be sure your remote control is in the TV mode.
The batteries supplied do not contain the heavy metals mercury and cadmium.
Nevertheless in many countries batteries may not be disposed of with your
household waste. Please check on how to dispose of batteries according to local
regulations.
§
Switch the TV on : Press the power key B at the right side of the
monitor and the one on the front of the receiver box.
A green indicator lights up both on the monitor and on the receiver box and
the screen comes on.
If the indicator is red, press the - P+ key or one of the digit keys on the
remote control.
monitor and the one on the front of the receiver box.
A green indicator lights up both on the monitor and on the receiver box and
the screen comes on.
If the indicator is red, press the - P+ key or one of the digit keys on the
remote control.
The green indicator blinks every time you press a key on the remote control.
When you switch on your set for the first time, the menu
When you switch on your set for the first time, the menu
LANGUAGE
automatically appears on the screen. The explanation appears in different languages
one at a time. Follow the instructions on screen.
one at a time. Follow the instructions on screen.
Preparation
1m
min.
B
R6AA - 1,5V
B
w
æ
b
S
b
Ì
VCR
MOVIE
OTHER
NEWS
CHILD
SPORT
TV
DVD
SAT
CD
TAOE
TUNER
CDR
TV
1008.3 gb /69 08-07-2002 14:20 Pagina 3